WuGing Posted August 22, 2020 Share Posted August 22, 2020 I'm in the middle of trying to migrate my array to a new system. I'm coming from a Dell R710 to a custom build. MOBO: Gigabyte Z490 Vision G Proc: i7-10700 Mem: 64GB DDR4-3000 M.2 Evo 970 <- being added as a cache drive I've moved all my drives over, (hoping they'll all populate up correctly), I've plugged by unRAID USB into one of the motherboards USB2.0/1.1 slots, the system boots, but unRAID doesn't appear to boot properly. I've enabled CSM, set Storage Boot Option Control and Other PCI Devices to UEFI, changed some of them back again to legacy, but try as I might, unRAID just doesn't seem to boot. The most I get is a black screen with the "_" in the top left. And then it just hangs. Am I missing some BIOS configuration settings somewhere? Did I introduce an issue with my USB? At something of a loss here. Suggestions welcome. Quote Link to comment
WuGing Posted August 22, 2020 Author Share Posted August 22, 2020 Update: updated the BIOS from f3 to f6, changed a few settings (CSM enabled) and I seem to be able to (somewhat) reliably get back into unRAID now. I'll have to add a few more changes to get it consistent, but I seem to have issues getting an IP now. I did have it set statically previously, I've tried changing it back to dynamic, but it doesn't quite seem to be working. I'm not sure if I'm running into the 2.5GbE not being supported, or what. There does seem to be activity on the port and router, but I don't seem to be getting an IP. Quote Link to comment
itimpi Posted August 22, 2020 Share Posted August 22, 2020 What version of Unraid are you using? If you have a 2.5GB capable NiC then it almost certain that you will need to use the 6.9.0 beta release to have drivers for it loaded. Quote Link to comment
WuGing Posted August 22, 2020 Author Share Posted August 22, 2020 38 minutes ago, itimpi said: What version of Unraid are you using? If you have a 2.5GB capable NiC then it almost certain that you will need to use the 6.9.0 beta release to have drivers for it loaded. I'm on 6.8.2. Quote Link to comment
itimpi Posted August 22, 2020 Share Posted August 22, 2020 49 minutes ago, WuGing said: I'm on 6.8.2. That would explain why you do not get an IP as there will almost certainly not be any drivers for your NIC in that release. Quote Link to comment
WuGing Posted August 22, 2020 Author Share Posted August 22, 2020 1 minute ago, itimpi said: That would explain why you do not get an IP as there will almost certainly not be any drivers for your NIC in that release. Alright. I'm working on getting things booted back up on the old machine to run the update. Quote Link to comment
WuGing Posted August 22, 2020 Author Share Posted August 22, 2020 Took some time to work things out, got things updated, and I've got an IP now. Thanks @itimpi! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.