mbc0 Posted August 27, 2020 Share Posted August 27, 2020 (edited) Hi, I upgraded from stable to the latest beta yesterday and noticed my CPU temps are higher than they were on Stable. I have checked CPU Temp when in the bios and it is 29-30 degrees c There are quite a few sensors to choose but the CPU one seems very high when the server is idle (no dockers/VM's running) Do I have the right sensor selected? Model: XCASE24 M/B: Gigabyte Technology Co., Ltd. X399 DESIGNARE EX-CF Version x.x - s/n: Default string BIOS: American Megatrends Inc. Version F12. Dated: 12/11/2019 CPU: AMD Ryzen Threadripper 2950X 16-Core @ 3500 MHz HVM: Enabled IOMMU: Enabled Cache: 1536 KiB, 8192 KiB, 32768 KiB Memory: 48 GiB DDR4 (max. installable capacity 512 GiB) Network: bond0: fault-tolerance (active-backup), mtu 9000 eth0: 10000 Mbps, full duplex, mtu 9000 Kernel: Linux 5.7.8-Unraid x86_64 OpenSSL: 1.1.1g Edited August 27, 2020 by mbc0 Quote Link to comment
JorgeB Posted August 27, 2020 Share Posted August 27, 2020 You should post this in the existing plugin support thread: Quote Link to comment
mbc0 Posted August 27, 2020 Author Share Posted August 27, 2020 5 minutes ago, johnnie.black said: You should post this in the existing plugin support thread: Ah apologies!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.