Joedy Posted September 24, 2020 Share Posted September 24, 2020 Hi I have started getting the following erros and would appreciate if anyone can point me in the right direction please ep 24 14:25:52 HENAS02 kernel: ata11.00: failed to read SCR 1 (Emask=0x40) Sep 24 14:25:52 HENAS02 kernel: ata11.01: failed to read SCR 1 (Emask=0x40) Sep 24 14:25:52 HENAS02 kernel: ata11.02: failed to read SCR 1 (Emask=0x40) Sep 24 14:25:52 HENAS02 kernel: ata11.03: failed to read SCR 1 (Emask=0x40) Sep 24 14:25:52 HENAS02 kernel: ata11.04: failed to read SCR 1 (Emask=0x40) Sep 24 14:25:52 HENAS02 kernel: ata11.01: exception Emask 0x100 SAct 0xc00 SErr 0x0 action 0x6 frozen Sep 24 14:25:52 HENAS02 kernel: ata11.01: failed command: WRITE FPDMA QUEUED Sep 24 14:25:52 HENAS02 kernel: ata11.01: cmd 61/40:50:48:c9:43/05:00:01:00:00/40 tag 10 ncq dma 688128 out Sep 24 14:25:52 HENAS02 kernel: res 40/00:c8:48:c9:43/00:00:01:00:00/40 Emask 0x100 (unknown error) Sep 24 14:25:52 HENAS02 kernel: ata11.01: status: { DRDY } Sep 24 14:25:52 HENAS02 kernel: ata11.01: failed command: WRITE FPDMA QUEUED Sep 24 14:25:52 HENAS02 kernel: ata11.01: cmd 61/40:58:88:ce:43/05:00:01:00:00/40 tag 11 ncq dma 688128 out Sep 24 14:25:52 HENAS02 kernel: res 40/00:c8:48:c9:43/00:00:01:00:00/40 Emask 0x100 (unknown error) Sep 24 14:25:52 HENAS02 kernel: ata11.01: status: { DRDY } Sep 24 14:25:53 HENAS02 kernel: ata11.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:25:53 HENAS02 kernel: ata11.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:25:53 HENAS02 kernel: ata11.01: hard resetting link Sep 24 14:26:03 HENAS02 kernel: ata11.01: softreset failed (1st FIS failed) Sep 24 14:26:06 HENAS02 kernel: ata11.15: qc timeout (cmd 0xe4) Sep 24 14:26:06 HENAS02 kernel: ata11.01: failed to read SCR 0 (Emask=0x4) Sep 24 14:26:06 HENAS02 kernel: ata11.01: reset failed, giving up Sep 24 14:26:06 HENAS02 kernel: ata11.15: hard resetting link Sep 24 14:26:07 HENAS02 kernel: ata11.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:26:07 HENAS02 kernel: ata11.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:26:07 HENAS02 kernel: ata11.01: hard resetting link Sep 24 14:26:08 HENAS02 kernel: ata11.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:26:09 HENAS02 kernel: ata11.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Sep 24 14:26:09 HENAS02 kernel: ata11.03: SATA link down (SStatus 0 SControl 320) Sep 24 14:26:10 HENAS02 kernel: ata11.04: SATA link down (SStatus 0 SControl 320) Sep 24 14:26:10 HENAS02 kernel: ata11.00: configured for UDMA/133 Sep 24 14:26:10 HENAS02 kernel: ata11.01: configured for UDMA/133 Sep 24 14:26:10 HENAS02 kernel: ata11.02: configured for UDMA/133 Sep 24 14:26:10 HENAS02 kernel: ata11: EH complete henas02-diagnostics-20200924-1429.zip Quote Link to comment
JorgeB Posted September 24, 2020 Share Posted September 24, 2020 Don't use controllers with or connected to SATA port multipliers. Quote Link to comment
Joedy Posted September 24, 2020 Author Share Posted September 24, 2020 JorgeB I appreciate you responding but a little bit of constructive feedback what you replied with was no help what so ever. I did do some research before i posted and was not lazy just looking for a hand out. the issue ended up being a SATA cable that was not plugged into one of my SATA backplane correctly which was where my parity drives sat as well as a fault 1TB SDD cache drive that was part of my cache pool. Quote Link to comment
JorgeB Posted September 24, 2020 Share Posted September 24, 2020 Glad you find the problem, but we still don't recommend using SATA port multipliers, and you might see similar errors in the near future, though they do work for some. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.