Troussdesoin Posted November 21, 2020 Share Posted November 21, 2020 Hello Guys, Some time ago, i had read Errors on the array. But it was BTFRS errors and i removed the cache drive and it stopped spewing errors. But tonight, when i came home, it says it had found read errors. It it bad? Should i buy new drives? Thanks a lot .DS_Store domain.cfg go docker.cfg super.dat ident.cfg share.cfg network.cfg disk.cfg WDC_WD40EFRX-68N32N0_WD-WCC7K5VY42E9-20201121-1827 parity (sdd).txt SanDisk_Ultra_Fit_4C530001230713104105-0-0-20201121-1827 flash (sda).txt WDC_WD40EFRX-68N32N0_WD-WCC7K6SKLNHN-20201121-1827 disk2 (sdc).txt Samsung_SSD_860_EVO_1TB_S4FMNE0MB10644A-20201121-1827 cache (sdb).txt WDC_WD40EFRX-68N32N0_WD-WCC7K5VY4XY7-20201121-1827 disk1 (sde).txt Windows 10.xml cmdline.txt btrfs-usage.txt plugins.txt motherboard.txt iommu_groups.txt ethtool.txt folders.txt lsmod.txt lsscsi.txt loads.txt memory.txt lspci.txt meminfo.txt lsusb.txt top.txt ps.txt vars.txt lscpu.txt lsof.txt df.txt ifconfig.txt libvirt.txt docker.txt syslog.1.txt syslog.txt no qemu log files unraid-6.8.3.txt appdata.cfg domains.cfg M---a.cfg T----------e.cfg isos.cfg W----------s.cfg system.cfg D-------s.cfg D-------------o.cfg Quote Link to comment
JorgeB Posted November 21, 2020 Share Posted November 21, 2020 Disk2 appears to be failing, run an extended SMART test. P.S. next time please post the single diags zip file. Quote Link to comment
Troussdesoin Posted November 21, 2020 Author Share Posted November 21, 2020 Ok, i'm running it on Disk 2, but DIsk 1 is also saying that there are some errors Could it be software related? Quote Link to comment
JorgeB Posted November 21, 2020 Share Posted November 21, 2020 Also start a test for disk1, it can't be software, but it can be a different hardware issue, though it's logged as an actual disk problem for both disks. Quote Link to comment
Troussdesoin Posted November 22, 2020 Author Share Posted November 22, 2020 Hum, the Two tests completed without Error , here are the reports. It doest not seem like there is a major problem. What do you think? WDC_WD40EFRX-68N32N0_WD-WCC7K5VY4XY7-20201122-1341.txtWDC_WD40EFRX-68N32N0_WD-WCC7K6SKLNHN-20201122-1349.txt Quote Link to comment
JorgeB Posted November 22, 2020 Share Posted November 22, 2020 Disks are showing some SMART warnings, but this type of read errors can be intermittent, run another check (non correcting), also keep an eye on these attributes, if they continue to increase there will likely be more errors soon. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 199 051 - 5 ... 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 6 Quote Link to comment
Troussdesoin Posted November 22, 2020 Author Share Posted November 22, 2020 Ok thanks a lot, i'll check Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.