Tigerherz

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Tigerherz

  1. Ich habe xfs_repair mit -n ausgeführt, das bringt natürlich nichts. xfs_repair ohne -n und die Daten waren wieder da. Mein Dank geht an JorgeB. Ich schulde Ihm ein Bier.🍺 Gruss
  2. @JorgeB Thank you, the files are back. I need to learn more about xfs_repair. I owe you a beer 🍺 Greet's
  3. After a rebuilt, 2 of my shares no longer show any data. The data is still available on the discs. All hard drives were tested with xfs_repair and are ok. I noticed that the shares are now split level 1. But they should be "". I could now make 2 new shares and copy or move the data. Is there a way to change the splitlevel and display the data again? Does anyone have any other suggestions? Greet's
  4. Nach einem rebuilt zeigen 2 meiner Shares keine Daten mehr an. Die Daten sind auf den Disks noch vorhanden. Alle Festpatten wurden mit xfs_repair getestet und sind ok. Hat jemand andere Vorschläge?
  5. @omartian settings/disksettings/Default spin down delay:never I have longer this problem
  6. @omartian My server is not runnig all times. @Do you disable spin down for parity checks or at all times? I disable spin down for all times. @Also, if you got an error this way, do you run a correcting check afterwards? After clear stats, my disk a all green without errors. All my data are fine. @If your disks are spinning all the time, isn't that bad for longevity? The most problem for hdd's is heat and shock. @docker updates not available! Make sure your dns service is on 1.1.1.1 or 8.4.8.8.
  7. I had similar problems. It was a problem with spin down disks. I set spin down in disksettings to never and clear stats on the mainpage. I think my controller has a problem with spin down.
  8. @LinuxIt works he lives many, many thanks for the rescue, great work from you👍👍👍👍👍😃
  9. Diese Treiber sollen mit Win10 x64 funktionieren. https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_4d26cc3176a645189ec454e2ff#tab4 Aber ohne gewähr.
  10. Hallo, ich habe die auch gehabt. Windows 10 Bootvorgang bis zu 10min. Hab jetzt die Mellanox x3 drin, keine Probleme. Die NC550SFP+ laufen jetzt in einem Win Server 2019 ohne Probleme. MfG
  11. Array down VM down Docker down put samsung to the cache, start array and the rest. I hope it will help to late
  12. Ich hab eine alte ssd drin und die angegebene cpu. ssd ca. 1watt cpu ca. 15-20watt idle ca. 20watt Anschaffung mit Lüftern a 15euro 120Euro
  13. Habe es so gemacht. Stromverbrauch ist niedig. Ich werde von opnsense aber auch wieder absehen. Die Logik der Software hat sich mir auch noch nicht erschlossen. Ein falsches Häckchen und nichts geht mehr. Ist eher für Profis oder die es werden wollen. Wenn Du dich mit roles und nat auskennst ok.
  14. Und das Zweitwichtigste: ipmi Kein Rechner mehr ohne ipmi. Wer es hat, weiß es zu schätzen. 🙂
  15. So habe ich am Anfang auch gedacht. Hab mir ein Asrock Rack Board mit AMD 8core Cpu gekauft. 64gb Ram, 10gbe usw. Als der Glücksrausch vorbei war, da hab ich mich geärgert. Für das Geld hätte ich auch einen Server aus der Dell x30 Serie kaufen können. Heute kauf ich nach dem Motto: 1. Wieviel PCIe Slots, wieviel Cores, wieviel Ram. PCIe soviel wie möglich (wer weiß schon welche Karte da noch rein muß), Ram mindestens 4gb pro Core. Aber ich will Dir nicht die Freude nehmen. 🙂
  16. Schau Dir mal die Dell rx20 (x=2-9Reihe) an. Hab gerade einen r320 für 93Euro aus der Bay ersteigert. 4x 3,5 usw. Laufen recht leise und sind günstig. Speicher, günstig. Cpus günstig. Mein R910 hat 48cores, 256ram, allerdings wird es dann teurer wegen Stromverbrauch. Alle Grätesind 24/7 Läufer. Du must Dir nur den passenden aussuchen. Für die Festplatten habe ich Diskshelfs von Netapp.
  17. Test 6.9.2, same problem. Rolled back to 6.8.3 again! @DrBeaker thank you for your report Tigerherz
  18. @kennygunit Shelf is a NetApp DS4243 / IOM6. The controller is a NetApp PMC-Sierra PM8003 SCC 4-Port QSFP PCIe x8. The 6.8.3 Version has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.39. The 6.9.0 Version stable has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.40 The controller didn't find my drives with the new driver. It's a new driver problem.
  19. Hello, Excuse my pronunciation, english is not my natural language. Shelf is a NetApp DS4243 / IOM6. The controller is a NetApp PMC-Sierra PM8003 SCC 4-Port QSFP PCIe x8. The 6.8.3 Version has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.39. The 6.9.0-beta30 last working version. The 6.9.0 rc2 Version stable has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.40 The controller didn't find my drives with the new driver. The 6.9.1 same problem. The 6.9.2 same problem. Is there any way to get back the older driver or a patch? Thank's for reading T. PS.: Justification from limetech There were some changes in that driver in kernel 5.10.26 https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.26 Unraid 6.9.2 will include those changes. 😀😀😀😀😀😀😀😀😀😀 Good news, there is a patch for us. Big thank's to @Linux und @DrBeaker. You make a great work. Please give booth a like 👍 👍👍👍👍👍👍👍👍👍👍👍 !!!!!!!!! Everything at your own risk !!!!!!!!!! You are responsible yourself !!!!!!!!!!!! The NetApp PMC-Sierra PM8003 SCC 4-Port QSFP PCIe x8 works. Adaptec 6805H HBA Controller can't be confirn, I don't have one. Thank you