jamesk9

Rebooted the router, I think DHCP grabbed the ip address during a server reboot. Or Deleting those two SSH key files fixed it.

I started the UI (locally) in safe mode, still unable to access the webUI and cant telnet in. Verified the configured IP and noticed that the files SSH_host_key and SSH_host_key_pub both show 0 as the filesize. Saw a different post were CHBMB was recommending a user to delete the key files in the SSH directory if they show 0 as the filesize, but didnt specify which key files (I have 10 different). I deleted the two showing 0 kb and am still experiencing the same connectivity issues.

Was updating a docker (i think unrelated), system became unresponsive and in-accessible. Rebooted and realized I still couldn't access the UI or connect via telnet (putty). unraid 6.5.3 Was able to access via local monitor/KB and grabbed Diagnostics (attached).tower-diagnostics-20211220-2258.zip

Was thinking of upgrading and cleaning up my case ... looking at getting two of the cards Frank1940 linked. The same seller has this card, of which I would only need one. New LSI 6GB SAS Expander Card PCI-E Board for 9270-8i 9261-8i https://www.ebay.com/itm/301891588661 Would it drop in unRaid and play well as is?

Thanks! Helped me get mine recognized. What I did, was lift the wire out of the sata power connector closest to the notch as shown as the 3.3v gray wire in the picture.

Thanks UnBalance, 31T ReiserFS to XFS in 11 days and 19 hrs, all while maintaining parity and full usability (other than stopping array to format discs.. 5 mins each).

Yes dgaschk, I did it like you described.. My thought process was maint mode was to ensure disk was not mounted,, and I could still use the emmulated disk during rebuild. I thought I was correcting the physical disk, but seems like It did the opposite (corrected the emmulated version). Upon completion, I will reassign then perform rebuild of the disk. Thanks everyone, Ill post my success after the rebuild. Hopefully I won't create any more issues and headaches.

No, I ran it on md. Do I trust array when finished or parity? Thanks!

Running Unraid 5rc3 Im in the process of running "reiserfsck --rebuild-tree" I unassigned the physical drive that Im running reiserfsck on (and eventually the --rebuild-tree too), then restarted the array. Now that its almost finished. How do I get the repaired disk back in the array? If I reassign it, will I need to run the new config, since it will be different than the logical version of the drive (with errors) Ive been using while rebuilding the tree? Also do I need to do a parity check (trusting the array) as soon as I reassign it? I figured if I unassigned the disk (keeping it from unmounting), versus starting array in maint mode, that I would be able to use the array while rebuilding the tree. Now I'm wondering if I made more problems for myself. BTW, I have not written any files to the array since the disk has been unassigned.

CORSAIR HXi HX750i CP-9020072-NA 750W ATX12V / EPS12V 80 PLUS PLATINUM Certified Full Modular Power Supply Like the title says, cant vouch for the PSU, I don't own it, but it seems to be a good deal for a platinum single rail 750w http://www.newegg.com/Product/Product.aspx?Item=N82E16817139084 The last day for the rebate card is today 4-10-2015

I hadn't realized that the container volume sections were defining the associated paths in the array. thanks.. slowly grasping how the containers interact with unraid. All working now!

Great! Will re-configure my folders. And yes the *.img is on a cache only share and the app_cache share is cache only. Thanks

.

Im still trying to grasp this docker concept. I cannot configure sab to write to a usershare on my array. (see attached screencaptures) The docker is installed on a 'cache only' user share but cant write to the \mnt\user. Sab is generating a "Post processing error. Cannot create final folder /mnt/user/Media/movies_temp/" Running unraid beta12 Is there something Im doing/not doing?

Yes I did.. then it had a red ball next to it and said unformated. Didnt format it, but replaced it with a precleared disk, it says its rebuilding now. I still have the other disk, and nothing has been written to the array since this started. Did I miss up? When I said it was showing no file system, I was mistakenly running the check on sdh instead of mdh.

Ok using sdh1, the resierfs check completed.. no instructions other than 'done' this time. So do I replace it with the precleared drive?

CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026&cm_re=cx430-_-17-139-026-_-Product expires on 6-4-2014

I did the --rebuild tree option, now upon starting the array, there is a redball next to drive 5, but it says unformated next to it. Do I format it and restart array like when replacing a drive? Hoping it will rebuild from the rest of the disks? I ran the resierfs check again and got the following error I almost have a backup drive precleared, should I just wait, and replace it with the new drive and let it rebuild?

Here is the results of the filesystem check. Do I use the rebuild tree option? The disclaimer has me concerned. Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 88 found corruptions can be fixed only when running with --rebuild-tree ########### reiserfsck finished at Sun May 25 09:51:21 2014 ########### Also, before I try fixing this, I should be able to copy the files from the emulated drive 5 back to the array, cant I? I have plenty of space available. Thanks..

Heres a tinypaste link to the syslog http://tny.cz/fa4fe322

My syslog is filled with these errors running 5.0 rc3 cant obtain smart report for disk 5, tried from console also A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. root@Tower:~# smartctl -a /dev/sdh smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Short INQUIRY response, skip product id A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [5155 5159 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1915 1927 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 8018 does not match to the expected one 1 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 574350609. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [80747 88693 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 8018 does not match to the expected one 1 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 574350609. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [80747 88694 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 8018 does not match to the expected one 1 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 574350609. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [80747 88697 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 8018 does not match to the expected one 1 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 574350609. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [80755 80758 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55154 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 100831 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55155 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 69334 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55161 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 100835 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55162 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 69336 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55163 0x0 SD] (Errors) May 22 09:55:21 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 32444 does not match to the expected one 2 (Minor Issues) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-5150 search_by_key: invalid format found in block 458949122. Fsck? (Errors) May 22 09:55:21 Tower kernel: REISERFS error (device md5): vs-13070 reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [1913 55164 0x0 SD] (Errors)

Thanks..

Running Unraid 5rc3 plugins are (sab,SB,CP and cached directories) Asus MB with A6-3500 APU and 4g of ram 10 Drives(29tb), 550w psu Recently upgraded to a 4 port STATA card (si-pex40064 Marvell 88SE9215) I immediately noticed errors in syslog, and I believe its my cache drive which isn't hooked up to the new card. Attached are the syslog and the smart report on the drive. I'm running the extended smart test, but it wont complete for 48 mins.. I've also had a few random reboots in the last few days, since installing the new card. Could someone help me decipher the syslog? Cable, approaching PSU limit, or physical drive issues? Thanks! syslog-2014-03-08.zip

SYBA SII-PEX40064 4 port SATA III (6.0Gb/s) PCI-e x1 2.0 card $13.99 AR FS @ Newegg.com http://www.newegg.com/Product/Product.aspx?Item=16-124-064 Newegg.com has the SYBA SI-PEX40064 PCI-Express x1 2.0 Low Profile Ready SATA III (6.0Gb/s) Controller Card (4 ports) [newegg.com] for $14.99 after rebate at Newegg.com. Price: $28.99 with free shipping Rebate: -$15 [newegg.com] Limit 1 per household. Total: $13.99

Parity sync finally finished.. Now off to fix my drive 3 (I hope). Thanks guys!