brasiledo

Members
  • Posts

    17
  • Joined

  • Last visited

Everything posted by brasiledo

  1. This seemed to just recently occur but the quick search when clicking the magnify glass doesn't search. When I click into the episode and click quick search still not getting anything. I did do the interactive search and episodes appeared and i was able to send to sab to download. I'm going to try to remove and re add the docker. Any input would be greatly appreciated This is the error in the logs 2024-03-25 21:52:10,003 DEBG 'sonarr' stdout output: [Error] TaskExtensions: Task Error [v4.0.2.1183] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed
  2. When playing Plex content on Roku, the videos will often go into buffering and then an error message 'your connection isn't fast enough to stream' and stop the video. The work around to get this to work is to lower the stream quality. Also to note, I'm streaming this locally so I wouldn't think the network would be a factor. some of the errors in the logs are Failed to stream media, client probably disconnected after 917504 bytes: 32 - Broken pipe Failed to stream media, client probably disconnected after 1310408704 bytes: 104 - Connection reset by peer I attached my full log file Plex Media Server.1.log
  3. Yes I resolved the issue I had to reinstall Radarr with new DB and just re set everything back up. The problem was a corrupt DB so the choices are to restore a backup DB or just reinstall from scratch. I kept the old Radarr instance and just changed the port so i can load them side by side and just copy all the settings and movies. Hope this helps!
  4. Radarr hasn't been downloading automatically. I have movies that I am able to search interactively and manually download but will not auto search and grab the movie. The error I'm seeing over again is below: 2023-03-03 19:39:05.9|Error|TaskExtensions|Task Error [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1033 at Dapper.SqlMapper.QueryMultiple(IDbConnection cnn, String sql, Object param, IDbTransaction transaction, Nullable`1 commandTimeout, Nullable`1 commandType) in /_/Dapper/SqlMapper.cs:line 1009 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 189 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 146 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 132 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 146 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in D:\a\1\s\src\NzbDrone.Core\Jobs\Scheduler.cs:line 42 at System.Threading.Tasks.Task.InnerInvoke() at System.Threading.Tasks.Task.<>c.<.cctor>b__272_0(Object obj) at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread)
  5. Having weird playback issues what seems to be new tv shows, where it only plays locally from one tv. When I test local play back from a web browser it will not load and from certain TVs locally. Remote users started reporting this issue and i was able to replicate it only from these devices. Also, its only a certain new shows but not all Here are logs I just pulled from the event: Jan 05, 2021 08:23:08.000 [0x14718d435700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:10.923 [0x14715c3e1700] DEBUG - [Transcode] Exists("/tmp/Transcode/Sessions/plex-transcode-op8zrkoc1khqki85qvvy1ewz-4d430dbf-6372-4d7b-b64c-060730503b47/init-stream0.m4s") => 0 Jan 05, 2021 08:23:10.923 [0x14718dcdf700] DEBUG - Completed: [192.168.1.19:63650] 404 GET /video/:/transcode/universal/dash/op8zrkoc1khqki85qvvy1ewz/0/initial.mp4 (9 live) TLS GZIP 120098ms 458 bytes (pipelined: 1) Jan 05, 2021 08:23:11.000 [0x1470d3dfe700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-168.wav' Jan 05, 2021 08:23:11.000 [0x14715c9e4700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:11.000 [0x14718c62e700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:14.000 [0x14715c3e1700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-169.wav' Jan 05, 2021 08:23:14.000 [0x1470d3dfe700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:14.000 [0x14718d8dd700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:17.000 [0x14718c62e700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-170.wav' Jan 05, 2021 08:23:17.000 [0x14715c9e4700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:17.000 [0x14715c3e1700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:20.000 [0x14718d8dd700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-171.wav' Jan 05, 2021 08:23:20.000 [0x14718c62e700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Plex version 1.21.1.3842
  6. I actually just got it working again, I just changed the container path to /Movies and re added it to root folders in Radarr. For some reason it wasn't working with /Media which is what I use for Sonarr. I'm not completely sure if that was the root cause but at least its fixed.. Thanks for the help and step in the right direction!
  7. ich777/radarr Unraid - Recently started running into an issue with Radarr not being able to import movies, stating permissions denied to /Media folder for import. I've tried applying Chmod 777 to this folder with no luck
  8. Having an issue when trying to connect custom script to trigger on import. Getting this message: ApplicationName='/tools/Radar_completion.sh', CommandLine='', CurrentDirectory='', Native error= Access denied I tried CHOWN on the folder permissions to 'nobody' but still the same issue. Are there specific credentials radarr is authenticating?
  9. Radarr UI 'unable to connect' Out of nowhere, radar UI not able to load. I have tried re-adding the docker and restoring config and nzbdrone.db files but still not able to work. All other dockers working fine and Radarr was working fine yesterday. No changes have been made since last working
  10. out of nowhere, radar UI not able to load. I have tried readding the docker and restoring config and nzbdrone.db files but still not able to work. All other dockers working fine and Radarr was working fine yesterday. No changes have been made since last working
  11. Fix Common Problems is reporting a Machine Check Events error I attached the syslog can someone please help Thanks in advance! syslog
  12. Fix Common Problems is reporting a Machine Check Events error with the following fix Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged Attached syslog, can someone please help Thanks in advance! syslog