Profezor

Members
  • Posts

    155
  • Joined

  • Last visited

Everything posted by Profezor

  1. 1.Yes, it certainly would be. Did n't. even think of that 2.I don't know how to find the controller information 3.Attached Thanks galaxy-diagnostics-20240216-1254.zip
  2. OK here is a bit more info. I added the Disk Location plugin. The two 16 TB Seagate drives (one is data and one is the parity) in the Not Found Section passed the SMART test, so they have power and they both have new SATA cables as well. However, they both don''t show up in the array (or as unassigned drives). Any ideas on how to get them to appear? This is last issue from rebuilding. What I am I missing? Thanks in advance. IMG_7915.HEIC
  3. Have not checked the power cables and the motherboard is straight out of the box, which of course does not. rule out a defect. Taking the machine to repair show so they can test everything.
  4. No they don't show up in the Bios either, I just see the 2 drives plus the 2 cache drives. It must be a power connection or bios setting or?
  5. I will check and get back to you. But at least 3 of 5 were visible after I switched cables, but now I just see 2.
  6. Ok, I have made progress. i have all my dockers back. i also changed all my Sata cables with brand new ones, But now the system can’t see three drives. Could it be not the sata cables but the power cables? Or…?Diagnostic attached. galaxy-diagnostics-20240128-1820.zip
  7. I made some shares exportable and some not. How now to I get to the invisble shares?
  8. any advice with this. one? Given, I am not using my backup usb as it would not boot, I am using a fresh unraid install. So it doesn’t have my old containers. Do you think I could copy the docker templates from the unbootable usb? If so where are the templates and associated files located? if it Docker.man and docker folder within the plug-in folder? Or should I copy over more?
  9. Given, I am not using my backup usb as it would not boot, I am using a fresh unraid install. So it doesn’t have my old containers. Do you think I could copy the docker templates from the unbootable usb? If so where are the templates and associated files located? if it Docker.man and docker folder within the plug-in folder? Or should I copy over more?
  10. thanks. Cables. so I should probably replace all the SATA cables to be sure? I wasn’t hiding anything. I thought that the two forums would reach different people who would have different perspectives.
  11. Appdata seems fine, but there are no dockers. Is there a way re-add the dockers, but capture the configuration from the existing appadata files? galaxy-diagnostics-20240123-1751.zip
  12. No dockers or vm, nut rebooted twice and became editable. Thanks
  13. Network settings are set to static and i can’t change to automatic . how do I get back to editable settings?
  14. I switched chassis. I have. no issue with the moved data drives, BUT my SSD cache drive shows. - unmountable. So I have no access to that drive. Without formatting and starting. from scratch, any ideas? Thanks. in advance.
  15. Morning! I make a live linux to test the. system. It booted immediately. SO it seems my boot usb files are corrupted. If I make a clean boot usb, and boot with that - WILL I LOOSE ALL MY DATA AND DOCKERS ETC? OR will I be ok and get back to normal? Thanks
  16. But as u see that is not working unfortunately what would happen if I created a new usb, not a backups? would have still have access to my drives and data?
  17. Ok, I removed the “-“ and double check the bios end up it still goes to the shell/script. Any other suggestions? How do I unable uefi in unraid other than changing the folder?
  18. I can't get to unpaid (yet), but I will check the flash drive and change the name as you suggest. Thanks very much, I will report back.
  19. I changed my motherboard and chassis. I took the drives and moved to the new chassis. Can't get it to boot. I am using a copy of the last boot disk saved here at Unraid.net Can you see anything in the picture? This is. where the booting stops What would happen if I tried to boot. from a new boot usb instead of my own? Really need my data and stuff. IMG_7757.HEIC
  20. If you are in Stockholm or close by, I need your help. I have been running unpaid for years, but changed. chassis and motherboard and I can't get it to boot. Perhaps we can have a zoom or we can. meet up. Please. Thanks iin advance. IMG_7757.HEIC
  21. I changed my motherboard and chassis. I took the drives and moved to the new chassis. Can't get it to boot. I am using a copy of the last boot disk saved here at Unraid.net Can you see anything in the picture? This is. where the booting stops What would happen if I tried to boot. from a new boot usb instead of my own? Really need my data and stuff. IMG_7757.HEIC
  22. This is output of my digikam log. Additional, my GUI does connect. It shows a bank page with "Cannot GET /" I am sure it is an easy solution, but need help to solve. I am running 6.12.3 Thanks in advance. __ 2023/09/18 11:20:29 [warn] 221#221: could not build optimal types_hash, you should increase either types_hash_max_size: 1024 or types_hash_bucket_size: 64; ignoring types_hash_bucket_size _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. Xvnc KasmVNC 1.2.0 - built Sep 15 2023 16:22:02 Copyright (C) 1999-2018 KasmVNC Team and many others (see README.me) See http://kasmweb.com for information on KasmVNC. Underlying X server release 12014000, The X.Org Foundation [migrations] started [migrations] no migrations found ─────────────────────────────────────── ██╗ ███████╗██╗ ██████╗ ██║ ██╔════╝██║██╔═══██╗ ██║ ███████╗██║██║ ██║ ██║ ╚════██║██║██║ ██║ ███████╗███████║██║╚██████╔╝ ╚══════╝╚══════╝╚═╝ ╚═════╝ Brought to you by linuxserver.io ─────────────────────────────────────── To support LSIO projects visit: https://www.linuxserver.io/donate/ ─────────────────────────────────────── GID/UID ─────────────────────────────────────── User UID: 99 User GID: 100 ─────────────────────────────────────── [custom-init] No custom files found, skipping... [ls.io-init] done. Obt-Message: Xinerama extension is not present on the server
  23. Seafile - How do I upgrade to PRO? After a week, I got Seafile to run, but only the community version. Thanks in advance.