uniartisan

Please accept my humble +1

可以限制qb使用的CPU核心，只给超线程即可，或者给1-2颗，但可能降低下载速度。

我能想到的有几种方法， vmdk vmware转kvm https://blog.csdn.net/u012206617/article/details/111183183 打包成为ghost，挂载虚拟机安装 直接硬盘直通

wireguad 插件通过gui开启内核功能，实际上属于gui而不是完整的wireguard功能。 卸载插件后在/boot/config里删除wireguard文件夹即可恢复到初始状态。 unraid 一切皆配置文件，在开机的时候读区和挂载。

安装到硬盘阵列的目录，找到启动文件，写启动脚本开机执行的命令里就可以

After upgrade to 6.9.2, the issue occurs.

Solved by : nano /boot/config/go http_proxy=http://server:port https_proxy=http://server:port /usr/local/sbin/emhttp & echo "export http_proxy=\"http://server:port\"" >> /root/.bash_profile echo "export https_proxy=\"http://server:port\"" >> /root/.bash_profile

In order to speed up network access, I configured V2ray in docker, set environment variables, and set up the unraid global proxy according to the official tutorial. The configuration is as follows: cat /boot/config/go http_proxy=http://127.0.0.1:9000 HTTPS_PROXY=http://127.0.0.1:9000 /usr/local/sbin/emhttp & echo "export http_proxy=\"http://127.0.0.1:9000\"" >> /root/.bash_profile echo "export https_proxy=\"http://127.0.0.1:9000\"" >> /root/.bash_profile Actually looking at the log found: Docker's pull will pass the proxy, but the application store and update plug-ins through webgui do not pass the proxy, and the network failure is still displayed, and no traffic information is displayed in the docker log. There is only docker update in the log information, no related domain name of github, my system is 6.9-rc2 tower-diagnostics-20210112-1808.zip

为了加速网络访问，我在docker配置了V2ray，并且设置了环境变量，按照官方教程设置了unraid全局代理。 配置如下： /boot/config/go http_proxy=http://127.0.0.1:9000 HTTPS_PROXY=http://127.0.0.1:9000 /usr/local/sbin/emhttp & echo "export http_proxy=\"http://127.0.0.1:9000\"" >> /root/.bash_profile echo "export https_proxy=\"http://127.0.0.1:9000\"" >> /root/.bash_profile 实际看日志发现： Docker 的pull会通过代理，但是应用商店和更新插件没有通过代理，仍然显示网络失败，docker日志内没有显示流量信息。 日志信息里只有docker，没有github的相关域名，我的系统是6.9-rc2

校验会做大量的与、或运算，看您的配置校验应该是CPU带不动了。

我使用的是Ladis的ups，用这个国产品牌主要是便宜，坏处就是官方没有这款的驱动。 我在官网下载驱动，安装到阵列里，开机脚本运行，就可以启动对UPS的通讯了，坏处就是只能unraid通过python脚本获取到状态，不过仍然可以有断电工作一段时间关机等等功能。 所有的设置都是Ladis的设置页面完成的。

是可以的，可以用sed来直接替换官方地址为镜像或者反代地址，不过建议直接全程代理，代理搞一个国内外分流。

I know that usb connections aren't reliable enough compared with sata or esata, but I have no choice. There is no more space for my desktop for I have another workstation host for my work. In order to expand my disk size, I have bought a five-drive docking station, which has a power supply of 120w. It has been working very well for more than two months and there is no read/write failure. In addition, I have used ssd as a cache, still thank you for your enthusiastic answer ：）

Thanks for your reply, I have tried another one, It seems to be fine.

When the SSD is installed in the usb3.0 hard drive box, it is recognized as a HDD drive，but I have no problem plugging the sata and m2 on the motherboard. Is there a way to manually mark this as ssd? My internal disk space is not enough, I can only solve it through external expansion. Failure to recognize as ssd will cause ssd to fail to trim

Device: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0665 Cypress Semiconductor idProduct 0x5161 USB to Serial bcdDevice 0.02 iManufacturer 1 INNO TECH iProduct 2 USB to Serial iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0022 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 3 20100813 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 4 Sample HID HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 27 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)

My UPS is VISENCH BR1000VA600W. This UPS can be easily detected and configured on Synology and QNAP, but it doesn't seem to be that simple on unraid. I don't know how to set it up. I searched on Google and forums but didn’t get the response I wanted. I connected via a usb cable and collected the following logs. Oct 16 20:21:26 Tower kernel: usb 3-9: USB disconnect, device number 6 Oct 16 20:21:58 Tower kernel: usb 3-9: new low-speed USB device number 7 using xhci_hcd Oct 16 20:21:58 Tower kernel: hid-generic 0003:0665:5161.0004: hiddev96,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:14.0-9/input0 Oct 16 20:24:48 Tower apcupsd[19726]: apcupsd exiting, signal 15 Oct 16 20:24:48 Tower apcupsd[19726]: apcupsd shutdown succeeded Oct 16 20:24:48 Tower apcupsd[20414]: apcupsd 3.14.14 (31 May 2016) slackware startup succeeded Oct 16 20:24:48 Tower apcupsd[20414]: NIS server startup succeeded Oct 16 20:26:01 Tower apcupsd[20414]: Communications with UPS lost. and： root@Tower:/dev# ls aer_inject full loop1 mem sdb shm/ tty16 tty28 tty4 tty51 tty63 vcs6 vcsu5 block/ fuse loop2 mouse@ sdb1 stderr@ tty17 tty29 tty40 tty52 tty7 vcsa vcsu6 bsg/ hidraw0 loop3 net/ sdc stdin@ tty18 tty3 tty41 tty53 tty8 vcsa1 vfio/ btrfs-control hpet loop4 null sdc1 stdout@ tty19 tty30 tty42 tty54 tty9 vcsa2 vga_arbiter bus/ hwrng loop5 port sdd tty tty2 tty31 tty43 tty55 ttyS0 vcsa3 vhci char/ initctl| loop6 ppp sdd1 tty0 tty20 tty32 tty44 tty56 urandom vcsa4 vhost-net console input/ loop7 ptmx sde tty1 tty21 tty33 tty45 tty57 usb/ vcsa5 vsock core@ kmem mapper/ pts/ sde1 tty10 tty22 tty34 tty46 tty58 vcs vcsa6 xconsole| cpu/ kmsg mcelog random sg0 tty11 tty23 tty35 tty47 tty59 vcs1 vcsu zero cpu_dma_latency kvm md1 rtc@ sg1 tty12 tty24 tty36 tty48 tty6 vcs2 vcsu1 disk/ log= md2 rtc0 sg2 tty13 tty25 tty37 tty49 tty60 vcs3 vcsu2 dri/ loop-control md3 sda sg3 tty14 tty26 tty38 tty5 tty61 vcs4 vcsu3 fd@ loop0 md4 sda1 sg4 tty15 tty27 tty39 tty50 tty62 vcs5 vcsu4 oot@Tower:/dev# cd usb/ root@Tower:/dev/usb# ls hiddev0 root@Tower:/dev/usb# How can I deal with it? etc/apcupsd# /sbin/apcaccess APC : 001,018,0448 DATE : 2020-10-16 21:45:23 +0800 HOSTNAME : Tower VERSION : 3.14.14 (31 May 2016) slackware UPSNAME : Tower CABLE : Ethernet Link DRIVER : PCNET UPS Driver UPSMODE : Stand Alone STARTTIME: 2020-10-16 21:45:22 +0800 STATUS : COMMLOST MBATTCHG : 10 Percent MINTIMEL : 10 Minutes MAXTIME : 0 Seconds NUMXFERS : 0 TONBATT : 0 Seconds CUMONBATT: 0 Seconds XOFFBATT : N/A STATFLAG : 0x05000100 END APC : 2020-10-16 21:51:37 +0800

Hello, I recently purchased a genuine system, and unraid is very easy to use. But for Chinese users, GitHub is very difficult to access. Unraid does not have its own v2ray plugin. I do n’t know how to use proxy on unraid. My router has no related functions. Does the official have the idea of using Code Cloud as a mirror? This can facilitate the majority of Chinese users.