T-Birth

Fixed this by navigating into my Bios -> ASPM and previously i forced l1 on peg and every other available option. This seems to be the problem. Changed this L1 to Auto and my Server runs smooth again with good Power Consumption.

Problem: After 2-3 hours of uptime, access to the server slows down. Tested with Brave and Firefox, navigating is hardly possible. The loading times increase massively. A restart with Ctrl+Alt+Del helps for now. I remember that this phenomenon appeared after I set ASPM to L1. But maybe someone finds other errors in the log ? syslog sokrates-diagnostics-20220320-1208.zip

Dude, this really saved my Gaming Weekend ! Thanks, Man it worked.

Updated the libvirt linked above. I'm still in the process of learning but tinkering around is sometimes the best way to gain knowledge. Also, the effect of hv-vendor-id=AuthenticAMD and <vendor_id state="on" value="AuthenticAMD"/> is simply hilarious. Its like the Animation Speed of OSX was amplified by 5 times. Geekbench: Previous libvirt 1119 Single-Core 4828 Multi-Core ghost82 libvirt (original) 1203 Single-Core 5084 Multi-Core ghost82 libvirt (modified) 1413 Single-Core 6018 Multi-Core

@ghost82 I try'd your EFI folder with changed SN related stuff and it bootet on Ryzen and x570 without trouble. So somehow it feels a lot snappier and more responsive in combination with my libvirt than my created EFI-Folder (linked above). Now I'm triggered and I'm trying to analyze why. Also if you don't mind, sharing your XML would really make my day. #stayhealthy EDIT: - The Speed increase is noticeable during Boot - Also the Mouse movement is a lot snappier - Opening Safari and changing Apps is also a little quicker/fluently

Native German here, so Denglish incoming... First, thanks Guys for your help ! But damn what a bad road trip, tr yd so much and every time I got stuck at boot...very frustrating but hey ! Now I have an installation screen from Catalina and my System is booting with Open Core 0.6.2 (Debug) yay ! My Configuration: - Unraid Version: 6.8.3 - CPU: AMD Ryzen 9 3950X - Motherboard: ASUS ROG Crosshair VIII Hero - GPU: Currently VNC only, adding RX 550 this weekend. - RAM: 2*16GB 3200MHz Crucial - SSD: 1TB Samsung 970 NVME as Cache - HDD: Several 4 TB HDD's So, what got me stuck here ? I tested it out and changed everything step by step and here is my conclusion -> - Using edk2-OVMF_202008_stable posted before, sadly got my system stuck at boot -> reverted to OVMF that comes with Macinabox fixed this - Used the libvirt from david279 as base but my system got stuck at boot with the custom qemu stuff at the end -> used the stock qemu settings that came with Macinabox fixed this - I used the Video above that explained everything really nice for my Ryzen, people with a similar System can follow it to the end but as ghost82 already mentioned -> don't apply the patches ! -> or else stuck at boot I started nearly from scratch and compared the libvirt from david279 and the libvirt from Leoyzen. Leoyzen also explains really nicely whats important to change in the libvirt (written in Grey). Combined the following resources to get a (work in progress) booting OSX with Ryzen 3950X on Unraid (after so many failed attempts): The First Post of this Thread The Answer @ghost82gave me above / thanks dude ! The Youtube Video below and the included Files/Guides/Explanations The libvirt from david and from Leoyzen Sources and my 2 cents: https://github.com/Leoyzen/KVM-Opencore/blob/master/libvirt.xml - The libvirt from Leoyzen, also some nice explanations on the Main Page https://forums.unraid.net/topic/84430-hackintosh-tips-to-make-a-bare-metal-macos/?do=findComment&comment=893286 - The libvirt from david279 https://www.technolli.com/downloads - Nice Tools and Video Collections about Hackintosh etc. https://dortania.github.io/OpenCore-Install-Guide/AMD/zen.html#starting-point - The Open Core install Guide I mainly used https://forums.unraid.net/topic/84430-hackintosh-tips-to-make-a-bare-metal-macos/?do=findComment&comment=849309 - How to create a qcow2 File, sadly this didn't work for me, my created File was somehow not bootable ? / I copied or cloned the qcow2 that Macinabox creates after triggering the Docker and restarting the Array for the first time. Worked for me. https://youtu.be/cQhzQXsd_Ig - The Video Guide I mainly used https://dortania.github.io/OpenCore-Install-Guide/AMD/zen.html#amd-bios-settings - The recommended Bios Settings for AMD Ryzen, getting everything (GPU Passtrough) to run without CSM and with UEFI only was tricky but the following Post helped https://www.reddit.com/r/unRAID/comments/dhoek4/nvidia_gtx1060_primary_gpu_passthrough/ - Creating a User Script Macro that automatically starts after the Array, fixed everything about UEFI and CSM for me related to UEFI GPU Passtrough. The Macro contains the 3 Magic "Bind" lines mentioned at the end of the post. *Even Unraid boots in UEFI Mode, PCIe ACS override is set to "Both" in VM Manager advanced view) https://github.com/dortania/OpenCore-Install-Guide/tree/master/clover-conversion - Simple explanation how to clean up clover if u want to switch to Open Core https://forums.unraid.net/topic/84601-support-spaceinvaderone-macinabox/?do=findComment&comment=873708 - Side Notes from ghost82 about switching from Clover to Open Core https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true - Latest Open Core download location, as ghost82 already mentioned -> use the latest Debug version https://forums.unraid.net/topic/84601-support-spaceinvaderone-macinabox/page/28/?tab=comments#comment-848847 - Best Advice Ever ! How to mount the qcow2 file inside Macinabox. For easy EFI replacing and experimenting. I turned this into a User Script for Mounting and Unmounting the qcow2. Saved so much time ! ...damn good stuff...and Cyberduck was my best friend at this point... https://forums.unraid.net/topic/84430-hackintosh-tips-to-make-a-bare-metal-macos/?do=findComment&comment=895068 - ghost82 EFI and Open Core Files Other useful stuff that try's to break out from my brain -> emulator pin / cpu pinning etc. https://forums.unraid.net/topic/52730-isolate-cpu/ https://forums.unraid.net/topic/74376-pining-cpus-to-docker-and-isolation/ https://forums.unraid.net/topic/47345-performance-improvements-in-vms-by-adjusting-cpu-pinning-and-assignment/ https://qemu.readthedocs.io/en/latest/system/deprecated.html VM Optimization: https://mathiashueber.com/performance-tweaks-gaming-on-virtual-machines/ https://heiko-sieger.info/creating-a-windows-10-vm-on-the-amd-ryzen-9-3900x-using-qemu-4-0-and-vga-passthrough/ https://heiko-sieger.info/running-windows-10-on-linux-using-kvm-with-vga-passthrough/ https://bugs.launchpad.net/qemu/+bug/1856335 https://bugs.launchpad.net/qemu/+bug/1856335/comments/5 https://bugs.launchpad.net/qemu/+bug/1856335/comments/14 https://bugs.launchpad.net/qemu/+bug/1856335/comments/21 https://bugs.launchpad.net/qemu/+bug/1856335/comments/33 Hugepages on Unraid https://forums.unraid.net/topic/88870-solved-unraid-enabling-hugepages-512gb-ram/?tab=comments#comment-825039 https://github.com/bryansteiner/gpu-passthrough-tutorial#part4 Optimize the "About This Mac" Area https://www.idownloadblog.com/2017/01/13/how-to-modify-about-this-mac-hackintosh/ Windows Area https://forums.unraid.net/topic/95802-guide-windows-10-vm-q35-50-with-nvidia-gpu-passtrough/ <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>MacinaboxCatalina</name> <uuid>ChangeME</uuid> <description>MacOS Catalina</description> <metadata> <vmtemplate xmlns="unraid" name="MacOS" icon="/mnt/user/domains/MacinaboxCatalina/icon/catalina.png" os="Catalina"/> </metadata> <memory unit='KiB'>12582912</memory> <currentMemory unit='KiB'>12582912</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <iothreads>2</iothreads> <cputune> <vcpupin vcpu='0' cpuset='10'/> <vcpupin vcpu='1' cpuset='26'/> <vcpupin vcpu='2' cpuset='11'/> <vcpupin vcpu='3' cpuset='27'/> <vcpupin vcpu='4' cpuset='12'/> <vcpupin vcpu='5' cpuset='28'/> <vcpupin vcpu='6' cpuset='13'/> <vcpupin vcpu='7' cpuset='29'/> <emulatorpin cpuset='0,16'/> <iothreadpin iothread='1' cpuset='0,16'/> <iothreadpin iothread='2' cpuset='1,17'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-4.2'>hvm</type> <loader readonly='yes' type='pflash'>/mnt/user/unraid/opencore/OVMF/edk2-OVMF_202008_stable/OVMF_CODE.fd</loader> <nvram>/mnt/user/unraid/opencore/OVMF/edk2-OVMF_202008_stable/OVMF_VARS.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <spinlocks state='on' retries='8191'/> <vpindex state='on'/> <frequencies state='on'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <vmport state='off'/> <ioapic driver='kvm'/> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='4' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='invtsc'/> <feature policy='require' name='hypervisor'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/user/unraid/opencore/opencore.qcow2'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/MacinaboxCatalina/Catalina-install.img'/> <backingStore/> <target dev='hdd' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/MacinaboxCatalina/macos_disk.img'/> <backingStore/> <target dev='hde' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='4'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x8'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </controller> <controller type='pci' index='6' model='pcie-to-pci-bridge'> <model name='pcie-pci-bridge'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='pci' index='7' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='7'/> <address type='pci' domain='0x0000' bus='0x06' slot='0x01' function='0x0'/> </controller> <controller type='pci' index='8' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='8'/> <address type='pci' domain='0x0000' bus='0x06' slot='0x02' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:72:e3:f0'/> <source bridge='br0'/> <model type='e1000-82545em'/> <address type='pci' domain='0x0000' bus='0x08' slot='0x08' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/> </source> <rom file='/mnt/user/unraid/virt und vBios/MSI Radeon RX 560 Aero ITX 4G OC/Polaris_21.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x09' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x1'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'/> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=ChangeME'/> <qemu:arg value='-smp'/> <qemu:arg value='8,sockets=1,cores=4,threads=2'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='host,kvm=off,vendor=GenuineIntel,+hypervisor,migratable=no,-erms,hv-time,hv-relaxed,hv-spinlocks=0x1fff,hv-vpindex,hv-frequencies,hv-crash,l3-cache=off,+invtsc,+topoext,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,+popcnt,+arat,+pclmuldq,+pdpe1gb,+rdtscp,+vme,+umip,check'/> <qemu:arg value='-set'/> <qemu:arg value='device.sata0-0-2.rotation_rate=1'/> <qemu:arg value='-set'/> <qemu:arg value='device.sata0-0-3.rotation_rate=1'/> </qemu:commandline> </domain> Fixed: 18.09.2020 libvrt -> added multifunction='on' (GPU-Passtrough) changed function='0x1' for audio device (GPU-Passtrough) e1000-82545em as Network adapter In Config.plist changed prev-lang:kbd to de:3 (German Keyboard layout) Set Target to 3 Used GenSMBIOS for Serial related stuff Unraid: added video=efifb:off pci=noaer to Unraid -> Main -> Flash -> Unraid OS Image *https://forums.unraid.net/topic/88208-macos-gpu-passthrough-issues-on-new-amd-x570-build/?do=findComment&comment=819788 Did some VM Tweaks -> iothread, hyperv spinlocks state='on' retries='8191' ------------------------------------------------------------------------------------------------------------------------------------------------------------------ To-Do: (help really appreciated) - No Sound on my Mac - Getting GPU-Passtrough to work - Sending back my RX 550 cause no support in later OSX. Buying an 560 or higher *https://dortania.github.io/GPU-Buyers-Guide/modern-gpus/amd-gpu.html#vega-10-series ------------------------------------------------------------------------------------------------------------------------------------------------------------------ Attached: 18.09.2020 * EFI Folder (Open Core 0.6.2 Debug on Ryzen) bootable SN related stuff removed work in progress libvirt above (Open Core 0.6.2 Debug on Ryzen) bootable tweaked VNC Version with de layout please change nic back to vmxnet3 for installation purpose osk removed uuid changed work in progress 24.09.2020 Added a modification of libvirt (inspired by ghost82) -> tweaked libvirt with highest Geekbench Score 1413 SC and 6018 MC removed +pcid (Causes Error's in the Log) removed hv-vendor-id=AuthenticAMD (qemu:arg from the botton "host" row removed) -> causes extreme speedy Animations removed <vendor_id state="on" value="AuthenticAMD"/> from <hyperv> .... </hyperv> -> causes extreme speedy Animations Thanks for reading. EFI.zip

Hi Guys, I'm tinkering around since several Days with Macinabox and Unraid. Since everyone recommends Open Core instead of Clover, i tr yd to Switch to it. I've been reading so many tutorials and created my own EFI based on Open Core 0.6.1. For my Ryzen System... damn that was a huge load of input. Even created custom Mount Scripts with the Add-on "User Scripts" based on ghost82. Thanks Dude ! This makes everything so much easier. My Configuration: - CPU: AMD Ryzen 9 3950X - Motherboard: ASUS ROG Crosshair VIII Hero - GPU: Currently VNC only, adding RX 550 this weekend. - RAM: 2*16GB 3200MHz Crucial - SSD: 1TB Samsung 970 NVME - HDD: Several 4 TB HDD's Side Note: SetupVirtualMap = Yes but should normally be No (Sanity Checker said change this but didn't help, so i changed it back to Yes) npci=0x2000 -> added this because my Mainboard has no option for Above 4G decoding CSM, Secure Boot, fast boot is disabled in my Bios. Everything runs via UEFI. GPU-Passtrough on my Windows VM is working perfectly fine, even with UEFI. Disabled Audio Interface and Realtek NIC in my BIOS, because I don't need it. MacinaboxCatalina installs and runs fine with stock Clover EFI and my custom VM-Settings. But I want to try Open Core because it seems more future proof. Now I'm stuck at here -> Removed MacinaboxCatalina and macinabox docker completly. Downloaded macinabox docker and triggered the pre-reinstallation of MacinaboxCatalina. Stopped the Array so the MacinaboxCatalina VM Appeared. Now before starting the VM i copied/cloned the Clover.qcow2 and renamed it to opencore.qcow2 Mounted and cleared anything inside the opencore.qcow2 Created an Open Core 0.6.1 EFI with help of several Guides and the Video below Downloaded the latest edk2-OVMF 202008 stable from here -> Pointed the MacinaboxCatalina VM manually to the new qcow2/OVMF files without changing the custom code any further. Started the VM and got stuck during boot of the installation. Can someone check out my EFI and my Errorlog, im really running out of options at this point... opencore0.6.1ryzen.zip Errorlog.zip