kwatz

I have just set up delugevpn and am attempting to test the speed and make sure everything is in working order, and I can't get the web UI for speedtest working through deluge to save my life. I'm trying to put adolfintel's speedtest docker through delugevpn. I followed the following steps: Set network type in speedtest to none Set extra parameters in speedtest to --net=container:binhex-delugevpn Add port variable in delugevpn docker that matches the port variable of speedtest Both start up. curl ifconfig.io shows the correct ip address in the country of my VPN config file. However, when I attempt to get to the speedtest webui by typing in my server IP and port, the connection times out. Attached are images of the relevant settings. Am I doing anything wrong? Edit: this is happening with all dockers I've tested. Speedtest settings: delugevpn settings: port mappings:

How can I pass this through Swag or a reverse proxy to get access to it remotely?

I am running Syncthing between my local Unraid machine and a remote linux server. I had great success for many months until recently when sync speeds dropped to around 500kbps. I have gigabit speeds and typically get 30-50 MBps sync speeds. When I restart syncthing on either end, speeds go back to 30-50 MBps for a few minutes, before immediately dropping down to 250-500kbps. I have turned off relaying and still experience the same issue. Below is the log from the remote server from boot up to when the issue resurfaced. Nothing seems out of the ordinary: 2021-07-02 03:34:38 My ID: [remote server ID] 2021-07-02 03:34:39 Single thread SHA256 performance is 278 MB/s using crypto/sha256 (275 MB/s using minio/sha256-simd). 2021-07-02 03:34:40 Hashing performance is 234.16 MB/s 2021-07-02 03:34:40 Overall send rate is unlimited, receive rate is unlimited 2021-07-02 03:34:40 Using discovery mechanism: global discovery server https://discovery.syncthing.net/v2/?noannounce&id=[discovery id] 2021-07-02 03:34:40 Using discovery mechanism: global discovery server https://discovery-v4.syncthing.net/v2/?nolookup&id=[discovery id] 2021-07-02 03:34:40 Using discovery mechanism: global discovery server https://discovery-v6.syncthing.net/v2/?nolookup&id=[discovery id] 2021-07-02 03:34:40 TCP listener ([::]:22000) starting 2021-07-02 03:34:40 Ready to synchronize "completed" (76xvq-hmumr) (sendonly) 2021-07-02 03:34:40 QUIC listener ([::]:22000) starting 2021-07-02 03:34:40 ... 2021-07-02 03:34:40 GUI and API listening on [::]:8384 2021-07-02 03:34:40 Access the GUI via the following URL: http://127.0.0.1:8384/ 2021-07-02 03:34:40 My name is "remote server name" 2021-07-02 03:34:40 Device [Unraid ID] is "Unraid server name" at [dynamic] 2021-07-02 03:34:44 Completed initial scan of sendonly folder "completed" (76xvq-hmumr) 2021-07-02 03:34:49 quic://0.0.0.0:22000 detected NAT type: Symmetric NAT 2021-07-02 03:34:54 Detected 1 NAT service 2021-07-02 03:35:31 Established secure connection to [Unraid ID] at [remote server ip]:22000-[local ip]:24974/tcp-client/TLS1.3-TLS_AES_128_GCM_SHA256 2021-07-02 03:35:31 Device [Unraid ID] client is "syncthing v1.17.0" named "f1ac3d8880d3" at [remote server ip]:22000-[local ip]:24974/tcp-client/TLS1.3-TLS_AES_128_GCM_SHA256 Now, the log for my Unraid server, rebooted a minute or two after the remote server: 2021-07-01 18:35:19 My ID: [Unraid ID] 2021-07-01 18:35:20 Single thread SHA256 performance is 438 MB/s using minio/sha256-simd (434 MB/s using crypto/sha256). 2021-07-01 18:35:21 Hashing performance is 376.18 MB/s 2021-07-01 18:35:21 Overall send rate is unlimited, receive rate is unlimited 2021-07-01 18:35:21 Using discovery mechanism: global discovery server https://discovery.syncthing.net/v2/?noannounce&id=[Discovery ID] 2021-07-01 18:35:21 Using discovery mechanism: global discovery server https://discovery-v4.syncthing.net/v2/?nolookup&id=[Discovery ID] 2021-07-01 18:35:21 QUIC listener ([::]:22000) starting 2021-07-01 18:35:21 TCP listener ([::]:22000) starting 2021-07-01 18:35:21 Using discovery mechanism: global discovery server https://discovery-v6.syncthing.net/v2/?nolookup&id=[Discovery ID] 2021-07-01 18:35:21 Using discovery mechanism: IPv4 local broadcast discovery on port 21027 2021-07-01 18:35:21 ... 2021-07-01 18:35:21 Using discovery mechanism: IPv6 local multicast discovery on address [ff12::8384]:21027 2021-07-01 18:35:21 Ready to synchronize "completed" (76xvq-hmumr) (receiveonly) 2021-07-01 18:35:21 GUI and API listening on [::]:8384 2021-07-01 18:35:21 Access the GUI via the following URL: http://127.0.0.1:8384/ 2021-07-01 18:35:21 My name is "f1ac3d8880d3" 2021-07-01 18:35:21 Device [remote server id] is "remote server name" at [dynamic] 2021-07-01 18:35:21 Completed initial scan of receiveonly folder "completed" (76xvq-hmumr) 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file -1"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 0"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 1"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 2"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 3"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 4"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 5"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 6"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 Puller (folder "completed" (76xvq-hmumr), item "file 7"): syncing: no connected device has the required version of this file 2021-07-01 18:35:21 "completed" (76xvq-hmumr): Failed to sync 9 items 2021-07-01 18:35:21 Folder "completed" (76xvq-hmumr) isn't making sync progress - retrying in 1m0s. 2021-07-01 18:35:31 Established secure connection to [remote server ID] at [Unraid IP address]:22000-[remote server IP address]:1026/tcp-server/TLS1.3-TLS_AES_128_GCM_SHA256 2021-07-01 18:35:31 Device [remote server ID] client is "syncthing v1.17.0" named "remote server name" at [unraid IP address]:22000-[remote ip address]:1026/tcp-server/TLS1.3-TLS_AES_128_GCM_SHA256 2021-07-01 18:35:31 New NAT port mapping: external TCP address 73.5.10.244:61571 to local address [::]:22000. 2021-07-01 18:35:31 New NAT port mapping: external TCP address 73.5.10.244:24974 to local address [::]:22000. 2021-07-01 18:35:31 Detected 2 NAT services 2021-07-01 18:35:40 quic://0.0.0.0:22000 detected NAT type: Port restricted NAT 2021-07-01 18:35:40 quic://0.0.0.0:22000 resolved external address quic://73.5.10.244:22000 (via stun.syncthing.net:3478) 2021-07-01 18:35:40 Failed to exchange Hello messages with [remote server id] at [Unraid server ip address]:22000-[remote server ip address]:58672/tcp-server/TLS1.3-TLS_AES_128_GCM_SHA256: EOF The remote server does in fact have the correct version of these 9 files. Also, the "failed to exchange hello messages EOF" error precedes the speed slowdown by a couple minutes - there's no event in the log that corresponds with the slowdown. I have given a dedicated IP address to syncthing - do I need to set a static listening address and forward the port on my local network? I just left the listening addresses as default in the setup and haven't done any port forwarding. Please let me know if I can provide any additional information.

I'm trying to run a second instance of radarr on my unraid machine. I went to Docker > Add Container > From Template > Radarr, then changed the port and renamed the container and the appdata folder "radarr4k". The port on the original radarr instance was 7878, and radarr4k is 7879. The one issue I have is when I go into the detailed editing screen for port number on radarr4k, it says container port is 7878, and I am unable to change it. The ip addresses shown in my docker hub are as follows: radarr: 172.17.0.2:7878/TCP <-> \[my ip\]:7878 radarr4k: 172.17.0.9:7878/TCP <-> \[my ip\]:7879 Here are the settings for the radarr4k docker container including the detailed port screen (also attached): docker settings 1 docker settings 2 detailed port settings docker addresses/ports When I attempt to connect via the WebUI for the new instance, it says it cannot connect. Having no such issues with the original instance. What am I doing wrong? Thanks for any advice.

Yeah I probably won't be going for the absolute best of the best GPUs anyway but it's good to keep all that in mind. I went with the 850 for now (seems like I got the last one on Newegg). It should be a couple years before I am interested in upgrading to a gaming rig and if I need to get a bigger power supply so be it. Appreciate the help!

Thanks for the advice. I do plan on upgrading to a two-in-one gaming machine in a couple years. Will get a nice mobo/graphics card and a more powerful CPU as well when that happens, so I'm going with the 850. Why do you say midrange? Even if I get top-of-the-line GPU/CPU/motherboard that would probably only put me at 70-80% of an 850. I wouldn't be growing the system much beyond that.

I'm putting the finishing touches on my Plex build now. First time using unraid and first time building a PC/server in a decade. The final big component I need to decide on is the PSU. Below are my components and their max wattage: CPU: Intel Core i5-9400 2.9 GHz 6-Core Processor (65W) CPU Cooler: Noctua NH-D15 82.5 CFM CPU Cooler (10W) Motherboard: ASRock B365M Pro4 Micro ATX LGA1151 Motherboard (60W) Memory: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-2666 CL16 Memory (11W) Storage: Eventually, up to 15 Western Digital Red 12 TB 3.5" 5400RPM Internal Hard Drive (15 x 15W = 225W) Case: Fractal Design Define 7 XL ATX Full Tower Case Case Fans: 4x 120mm, 1x140 (5 x 5W = 25W) Total: 396W I'm considering the Seasonic FOXUS GX-650 80+ Gold. Fully modular with a 12V rail at 54 amps, which should be plenty for my drives. My max wattage needs are just about 60% of the 650W so that feels good. Does anybody have experience with this model or one similar, and is it a good fit for my system? Additionally, is there any issue connecting my HDDs in series to the PSU using the SATA power cable Y-splitters? Thanks!