Olymoly

ran the scrub with correction, before i continue anything else i need to do to make sure all errors are corrected?

ok cool thanks

i wanted to increase my cache drive size anyways would it better to go that route, regardless of erros kn the pool. im guessing this pool needs to be fix either way before i move on to the new drives.

oh no! does that mean i have lost all my docker app's data? how do i recreate/delete the docker image? ive scrubbed pool and didnt get any errors. hmm i will do it again and check error correction. thanks again for your help.

rebooted and added some drives to preclear, however docker is failing to start again, seems to be the same drive and now failed smart, old age. i hardened to have already ordered larger ssd for replacement cache drives that should arrive today to help either way. i just have to figure out the procedure to swap them. nastradamus-diagnostics-20220730-0156.zip

reboot seems to have resolved it Sent from my iPhone using Tapatalk

ok changing data drive isn't what i want to do. i want to replace my disabled parity 8tb with a 16tb drive. Sent from my iPhone using Tapatalk

scrub and read check all passed with no errors, i added an 8tb drive and i've been moving data to allow for 10% free peace across all disks. question, my vms tab says "libvirt" service failed to start. do you know or see anything in the diagnostics that would cause this? Sent from my iPhone using Tapatalk

good morning, when building this unraid server, i created double disk parity, however the MB died and after doing a MB swap i found out that my hardrives were not compatible with my lsi cards. i was planning to do a MB swap back to the original model however now i'm just considering new hardrives, adding new larger drives and starting again from there. my concern now is since my party drive has been disabled for such a long period of time that i will not be able to do a party swap. is it still possible with out data loss and what would be the step or how would the step differ from the FAQ for parity swap? thanks Sent from my iPhone using Tapatalk

thanks you, im going start to unbalnce the drives back to 80% as i was in the middle of including a new drive. i tried to look up scrubbing etc as the terms you mentioned were over my head. giv4n the current state would it be safe to do a mb swap before i do this, or after? i would like to also fic my parity situation while doing any other data integrity check.

here you go , checked docker and it loaded! nastradamus-diagnostics-20220726-0331.zip

ive shutdown,removed the extra third sas cable and rebooted. Second cache is showing, posting diagnostic without array start. btrfs fi show nastradamus-diagnostics-20220725-1742.zip

ok wasn't expecting anything like that, i assumed i would be deleting data or changing values since it was full. i did my research to built this almost three years ago. it seems i have forgotten a lot of the basic things. however, if i am understanding you correctly, i need to remove one cable from my BPN-SAS2-836EL1 and/or add another HBA/LSI controller to the second cable.

latest reboot nastradamus-diagnostics-20220725-0657.zip

good evening, filled my drives/share, and stop the array to add a hard drive that was excluded from the share. (which i realize after i didn't need to do) restarted the array and now a cache drive is missing. i also have a parity drive missing but i am aware of that as my hard rives have an issue with my lsi controller. my docker is no longer start and i can add any data because when attempt to i receive a catastrophic error. also, i am looking to do a case/mb swap to resolve my parity issue, in the mean time i would like to know how to continue with out data loss given my current error. thank you! nastradamus-diagnostics-20220721-0428.zip

Ok I'll look more into it, I just dont understand if it is this, then why only the parity drives. If I switched these drives for WD would that also be a solution? Could this also be happening because I used lsi cards to create the array on the previous setup before the MB swap?

Looking to revist this topic over the next few weeks as its still an issue. Ive Updated my latest Diagnostics in case it would be useful. AFAIK, i am not using an LSI Controller. i was reading thru this topic again and I want to say I've tried now different drives/new drives and different slots for the drives, as i though it could be a connection or drive issue. i have two 920w PSUs for this Super-micro case, i doubt but would be the issue. how ever i can try to purchase a spare. in the meantime, can any offer some incite on what is can be causing this. i had no issues prior to this MB Swap so it seems odd to me and a bit lost on how to troubleshoot this. nastradamus-diagnostics-20210906-0342.zip

do you mean this? BPN-SAS2-836EL1

most up-to-date diagnostics, array started. i have nerd tools etc nastradamus-diagnostics-20210906-0342.zip

I don't have VM, I have Dockers, however the array was started maintenance mode to run smart. Smart.came.bacl.no errosnom the disk, I have nothing missing at a glance, I guess that reboot went a long way and fixed the immediate issue. I'll post new diagnostics when I have a chance, since I'm at work atm

The power down, no. The disks, i don't remember this being the case when I first built it and believe it started when I swapped motherboards about a year ago.

rebooted and here is the most latest diagnostics it takes about 20 mins to power down and then another 20 mins for disks to show up, to assign and start the array. started in maintenance mode and running extended smart check on disk 6. i am most worry about my data on disk 6, as my parity issue, seems to me to be a lost cause and i will have start over for me to get it to work. i plan to this when i have 2 week vacation at the end of the month. i also received 2 drives that i will begin to preclear tonight. still havent decided how i want to handle them. however will decide in time. first boot nastradamus-diagnostics-20210905-1201.zip

i am unable to get any download dialog for diagnostics, its just a busy icon. should i just reboot?

im trying to download a new Diagnostics but it seems its hanging, or working. could this be because the reason, and how can i fix it without removing important files related to about issue?