bigdan1190

Members
  • Posts

    11
  • Joined

  • Last visited

bigdan1190's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. Noticed an issue today, searched but can only find guides from 2 years ago. When searching for a TV show it flashes up briefly but then disappears showing no results. This is for any TV show. Movies list is not affected. What can I check? Shows as up to date in unRaid but on the Ombi page it shows Version3.0.5223 (New Update Available)
  2. yeah i was being an idiot, its been a while since i set it up and infact i was already using NGINX for https on my No-ip URLs haha.
  3. I don't think you can, but do you know if you can use https with duckdns?
  4. Please can you clarify this? I went to page 1 and saw no instructions. I've got mine registering to the group on my no-ip, but it doesn't set it an IP; Process 52, started as noip2-x86_64 -c /config/no-ip2.generated.conf, (version 2.1.9) Using configuration from /config/no-ip2.generated.conf Last IP Address set 0.0.0.0 Account xxxxxxxxxxx@gmail.com configured for: group NETGEAR-xxxxxxxxx-xxxxxxxxxxxxx Updating every 30 minutes via /dev/eth0 with NAT enabled. [May 08 23:37:39] Current status 1 noip2-x86_64 process active.
  5. All has been working ok for a few days now, it seems removing and re-adding the cache SSD from/to the array did the trick! Thanks very much.
  6. I came here with this problem, your reply solved it for me. Thanks very much
  7. Interesting, i hadn't thought of that - I'm going to run it without a cache drive for tonight and see if that affects it. The cache disk was formatted and it seemed to have been mounted. It is quite an old SSD though so could possibly have faults. I'm afraid I haven't looked at / seen any settings to do with Mover so i'm not sure. I'll google a guide for it Not planning to add parity at this stage, its mainly a media server and anything personal I also have backed up on Gdrive and a separate USB HDD. If it fails again tonight I'll update with the diagnostics again, if it works fine I guess that points to something to do with the cache drive I can then work further on. EDIT: I've found the mover stuff, and yes indeed it seemed to have been set to 03:40am...
  8. Hi please see attached and thank you for helping tower-diagnostics-20201108-1418.zip
  9. Hi all, I'm new to this side of the tech world so forgive me if I miss anything obvious. I have my Unraid set up on an old Dell r210 II, Xeon E3-1240 @ 3.4Ghz, 16GB DDR3. It runs fine all day with all dockers working perfectly and its nice and fast to work with and use e.t.c. but every night it has some sort of error, Unraid continues to work but all the dockers become unresponsive and I can't access the drive remotely through my Windows PC any more. All i have to do is restart the server and all is well but then it just happens again the next night. Here is the error from the logs, i've posted the errors from 3 different nights and i notice they're all at the exact same time - its not related to how long the server has been running as it had different uptimes; Nov 4 03:40:01 Tower kernel: shfs[23621]: segfault at 0 ip 0000000000403bd6 sp 000014b4ac5cf930 error 4 in shfs[403000+c000] Nov 4 03:40:01 Tower kernel: Code: 89 7d f8 48 89 75 f0 eb 1d 48 8b 55 f0 48 8d 42 01 48 89 45 f0 48 8b 45 f8 48 8d 48 01 48 89 4d f8 0f b6 12 88 10 48 8b 45 f0 <0f> b6 00 84 c0 74 0b 48 8b 45 f0 0f b6 00 3c 2f 75 cd 48 8b 45 f8 Nov 5 03:40:01 Tower kernel: shfs[8739]: segfault at 0 ip 0000000000403bd6 sp 000014adc39b7930 error 4 in shfs[403000+c000] Nov 5 03:40:01 Tower kernel: Code: 89 7d f8 48 89 75 f0 eb 1d 48 8b 55 f0 48 8d 42 01 48 89 45 f0 48 8b 45 f8 48 8d 48 01 48 89 4d f8 0f b6 12 88 10 48 8b 45 f0 <0f> b6 00 84 c0 74 0b 48 8b 45 f0 0f b6 00 3c 2f 75 cd 48 8b 45 f8 Nov 8 03:40:01 Tower kernel: shfs[23292]: segfault at 0 ip 0000000000403bd6 sp 0000146042515930 error 4 in shfs[403000+c000] Nov 8 03:40:01 Tower kernel: Code: 89 7d f8 48 89 75 f0 eb 1d 48 8b 55 f0 48 8d 42 01 48 89 45 f0 48 8b 45 f8 48 8d 48 01 48 89 4d f8 0f b6 12 88 10 48 8b 45 f0 <0f> b6 00 84 c0 74 0b 48 8b 45 f0 0f b6 00 3c 2f 75 cd 48 8b 45 f8 Would anyone be able to advise me on what this could be and what I can do to fix it? Many thanks, Dan
  10. Yeeessssssssssss thank you so much, this did the trick! Yup, just sorted I got the ITconfig installed as per the above instruction from wgstarks, disabled UTP and now i'm getting the correct speeds. The settings are in the pic below - just tick the box on the far left to enable those 2 settings and then untick the boxes in the 'settings' column.
  11. Hi all - first time poster here, just setting up my first unRaid system but i have previously used Plex / sonarr / radarr and transmission to run a similar NAS/server on a ras pi 4. I am having download speed issues with binhex-DelugeVPN using PIA connected to the Sweden server next gen. My ISP is Virgin Media here in the UK and i get 200Mb download speeds but on DelugeVPN i'm unable to download any faster than 1.2MB/s. I have had this problem previous with Virgin Media / PIA and the fix is to disable uTP however this is not an option on DelugeVPN. I see that i should be able to install the plugin ITconfig (https://github.com/ratanakvlun/deluge-ltconfig/releases) but when i try to install this it pops up with "uploading plugin" for a split second and then disappears it never seems to get anywhere. Has anyone had any luck with this? I'm wondering if its just a compatibility issue with the binhex version of DelugeVPN. Any help much appreciated.