DaFr0n

I just ran it and there doesn't seem to be any issues accessing/writing files from my Windows SMB

I'm having similar issues with Zoneminder not starting: root@30404418888a:/# service mysql start * Starting MariaDB database server mysqld [ OK ] root@30404418888a:/# service zoneminder start Starting ZoneMinder: 06/24/23 10:38:06.166412 zmpkg[22796].INF [main:318] [Sanity checking States table...] DBD::mysql::st execute failed: Lost connection to MySQL server during query at /usr/share/perl5/ZoneMinder/Logger.pm line 627. 06/24/23 10:38:06.234656 zmpkg[22796].ERR [ZoneMinder::Logger:630] [Can't execute log entry 'INSERT INTO Logs ( TimeKey, Component, ServerId, Pid, Level, Code, Message, File, Line ) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, NULL )': Lost connection to MySQL server during query] DBD::mysql::st execute failed: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) at /usr/bin/zmpkg.pl line 325. 06/24/23 10:38:06.234864 zmpkg[22796].FAT [main:325] [Can't execute: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111)] ZoneMinder failed to start

Hi All, lately I'm having frequent disk errors with Disk3 in my array and it being disabled. Removing it from the config then re-adding it starts the parity rebuild process. I have been looking at unbalance to remove all data from disk3 distributing across the array. My question is, if I run docker safe new perms will the affect files and folders I have setup using the Windows SMB share (there is a lot)? I don't want to reset a load of permissions only to experience further issues. unraid-diagnostics-20230623-1524.zip

Thanks for the help, out of interest what part of the diag would i need to be looking at?

Looks like its ran, here unraid-smart-20230214-1727.zipis a copy of the SMART download

Will do, I will upload logs once complete

Looking for help on the above, this has happened a few times recently across disk 2 & 3. Sometimes the disk doesn't get disabled, other times I need to removed the disk from the array config, and restart, adding it again to rebuild without errors. I do have spin down enabled & they all run through a LSI2008 flashed card. unraid-diagnostics-20230213-1832.zip

Does anyone know why event playbacks are coloured flickering on the bottom 3 quarters across all 3 of my cameras?

I will get it changed, thanks for the help

Yes its scheduled for once a week, not sure if this is to much? No its the first time i have seen a sync error

Would you run another parity and see what the output is? Cheers for the advise

I recently had a power cut and parity rebuild started (Write corrections enabled) after completing it states there is 4 errors, what's the best way to verify or check what the errors are? I have recently switched from a Marvel controller to a flashed Dell Perc H310 due to disks always disconnecting but never had a parity issue? unraid-diagnostics-20220930-1834.zip

Anyone had a issue regarding login? I can get to the login screen fine, upon entering my login details I get the following error: HTTP ERROR 500 Log shows: Aug 17 18:43:33 256ff5990435 zmstats[1044]: ERR [Failed DELETE FROM `Logs` WHERE `TimeKey` < unix_timestamp(now() - interval 2 day) LIMIT 100 :Table 'zm.Logs' doesn't exist in engine]

Brilliant, thank you again. Any issues with rebuilding I will drop a update here.

Yes it is as I checked the cables first. Would a Dell Perc H310 flashed to IT be a better option?

Thank you for the help. Much appreciated

Ahhh so it could still fail?

TBH I think it's time to get a better controller, assume this could also be contributing to the issue?

Hi sorry for not mentioning that, first time this has happened. I have had a disk ❌️ which needed to be rebuilt but never this issue. Would running in maintenence mode using the xfs repair with -L repair the disk. If so I did do that. Yes the 183G is about right for that drive

OK, attached unraid-diagnostics-20220811-2243.zip

Booted in maintenence mode, clicked on the appropriate disk and ran the check. I may have jumped the gun but another post stated run with -L. This stated there was errors etc and done its thing. I just booted out of maintenence as you have said (with the disk in the array) and its got a yellow ⚠️.. I can now see the storage availability and it states a rebuild is in progress.

After a power cut I have the following issue with one of my disks, a parity ran not long before hand and completed successfully so hopefully I haven't lost anything. What's the best/safest way to resolve? Status in file system check: Phase 1 - find and verify superblock... bad primary superblock - bad CRC in superblock !!! attempting to find secondary superblock... .found candidate secondary superblock... verified secondary superblock... would write modified primary superblock Primary superblock would have been modified. Cannot proceed further in no_modify mode. Exiting now. Thanks in advance unraid-diagnostics-20220811-2120.zip

Job sorted, brilliant. Its now up and running without the user shares being automatically created. Thanks again 😀

Database is default, data is set as per my disk share. /mnt/user/appdata does not have a zoneminder folder, this was deleted.

Hi dlandon Tried that still the same error, deleted Docker, template and appdata/zoneminder folder same error occurs