• Posts

  • Joined

  • Last visited

Everything posted by rainfactor

  1. Thanks to everyone that responded. I managed to get rid of it Thank you guys!!
  2. Hey guys. I have been away from the community for a while, turned on my server the other day and I updated it All good and nice but I got something that bothers me How do I get rid of the (see below) ?? I have these huge tooltips?! that cover all my screen. Is there a way to disable them? I apologize in advance if this was an obvious answer and didn't do my homework. Thank you
  3. Awesome job! Thank you! Works like a charm
  4. Oh man I got a 1030 instead but now I run into a different issue. It has a massive heatsink that won't be able to fit inside my R420 . Looking to replace it with a much more slimmer version
  5. I wouldn't mind however the R420 Pcie slot can only give 30W and that is the reason why I went with the 730 as it draws only25W
  6. I feel rather dumb now You are absolutely right. I totally missed that. Oh well....I guess will skip the Plex decoding, will use it for VM passthru only. Thank you
  7. Hello, Was wondering if a GT730 would be too old for this. I couldn't get it to do hw decoding no matter what. I have read this whole thread and tried all the various fixes suggested. The setup is : Unraid 6.9.0 RC2 on a PowerEdge R420 with a GT730 (I am limited by the power of the pcie slot), Plex container is binhex-pass, Plex does recognize my account as having a Pass under Account>> About ,the container has been updated with all the variables. See below the attached screenshots. Any advice will be appreciated. Thank you!!
  8. They do say the problem is always behind the keyboard. I did. not experience the shares issue anymore. It was usually popping up after 20.. ish hrs or so. I am suspecting a botched Nvme install that I have done. I reformatted it and it has been behaving for 2 days. Still seeing this message : sshd[14103]: error: kex_exchange_identification: Connection closed by remote host Not sure what this is. Do you still need the diagnostics zip?
  9. The PiHole container seems to be crashing and doesn't allow to connect to the gui I have been using it for a while yet the GUI refuses to connect after a day or so and the logs show this: Not sure if they are related.But If I restart the container it comes back online [31mERROR[0m[2020-12-26T14:46:52-05:00] update check failed: Get "https://update.argotunnel.com?arch=amd64&os=linux": dial tcp: lookup update.argotunnel.com on read udp> i/o timeout [31mERROR[0m[2020-12-26T14:55:09-05:00] failed to connect to an HTTPS backend "": failed to perform an HTTPS request: Post "": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) [31mERROR[0m[2020-12-26T14:55:09-05:00] failed to connect to an HTTPS backend "": failed to perform an HTTPS request: Post "": context deadline exceeded [31mERROR[0m[2020-12-26T14:55:10-05:00] failed to connect to an HTTPS backend "": failed to perform an HTTPS request: Post "": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) [31mERROR[0m[2020-12-26T14:55:10-05:00] failed to connect to an HTTPS backend "": failed to perform an HTTPS request: Post "": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
  10. sure, it doesn't do it right away. As soon as it happens I will post the zip. Thank you
  11. Hello, My shares keep disappearing somehow and upon checking the logs I have these lines: sshd[45970]: error: kex_exchange_identification: Connection closed by remote host kernel: shfs[17370]: segfault at 0 ip 0000000000403bd6 sp 000014ca9b9fb930 error 4 in shfs[403000+c000] I have not attempted to ssh and the server is not Internet facing. I have only one nextcloud container running through swag which I believe it is secure enough The only way to remedy this is by rebooting the whole server. Does anyone have any clue what this is about and how can I stop it from happening? Thank you
  12. Hello, Anyone attempted to install an NvME for cache on a Poweredge420? Got WD 1TB and attempted to install it yet can't get it to be recognized for the life of me. Tried both Pcie slots and nothing
  13. Amazing little container this Pihole. Works like a charm and I have it set up as my 2ndary DNS in case of a fail of my first one. Planning to do an HA Pihole. There are few tutorials out there. Seems to be in its infancy but it looks promising. Any chance to update the container with the latest WebInterface and FTL? I really appreciate your time for making this available to all of us. Cheers PS: Also noticed that seems to be crashing sometimes. Not sure but I believe cloudflared is the culprit
  14. Found the solution to my 1st problem. Enabled the HSTS in the default.conf in Nginx and not in ssl.conf like I thought. Everything is green now. Still trying to figure out where are the timezone settings in Nextcloud
  15. That's ok . Read the full sentence. Remove the https portion from the config Going from: 'overwrite.cli.url' => '', to. 'overwrite.cli.url' => '', That line as per Nextcloud docs is used for proxy configs which you said you didn't use Source : https://docs.nextcloud.com/server/16/admin_manual/configuration_server/config_sample_php_parameters.html?highlight=overwrite cli url#proxy-configurations
  16. nginx conf >>> ssl off. Or if misunderstood you and don't use nginx after all just remove the line 'overwrite.cli.url' => '',
  17. Didn't mention anything about your SSL config. This looks like a typical SSL missing/misconfigured. Either disable SSL in NginX or enable it and get a cert As far as I understood you are trying to access the address in http which in return is forcefully being redirected to https that is missing the SSL and thus giving you the error. I may be wrong but this is what I understood from your post.
  18. Hello, Just started using Unraid and so far so good. Installed a couple of apps and looks good. Installed Nextcloud, DuckDNS and Swag. Works amazing I have my own domain and everything. Followed a couple of very useful tutorials from here and got me going and If I was to believe the NextCloud security scanner everything validates with flying colours. I have two issues that I couldn't find any answers anywhere. 1. The nextCloud Overview keeps showing the warning: "The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips" However in my ssl.conf in Swag I have # HSTS, remove # from the line below to enable HSTS add_header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload" always; Restarted the containers a couple of times with no success 2.On the main Nextcloud dashboard the weather picks up my location however the time is way off Ex -7 C at 2PM. Not sure where it reads that time from. I have updated the date.timezone in php.ini with the right one but still no luck I couldn't find anywhere else where I could fix this If anyone can kindly point me in the right direction I would really appreciate it. Thank you PS: All the installs (NextCloud, DuckDns, Swag) are the latest versions as of 2 days ago,