• Posts

  • Joined

  • Last visited

stelks's Achievements


Newbie (1/14)



  1. Discovering the root cause is half the battle
  2. So I think I found the issue. After following your directions the Query inspector gives me the following: But then I noticed that it is trying to pull from Telegraf: I can change that to Prometheus and nothing happens still. I have deleted the dashboard a few times and dont see a place to enter what data source to pull from globally for the dashboard. Any idea why it is selecting Telegraf instead of Prometheus for all of these? Thanks again. You have been a big help
  3. Here is what I get if I go to Prometheus and click the URL from the Exporter: I can tell its working as the numbers are right: I just deleted the dashboard and reimported it again. Still saying no data, but Ill give it some time again as you said before it can take a bit.
  4. I gave it overnight and still no dice. It looks like its not getting any data to Grafana at all even though I can see that the plugin is working fine
  5. Thank you for your help that got it working in Prometheus!(Could of sworn I tried both lol) Do you have any idea why it would not be pulling the data into Grafana now that that is configured correctly. All of my other dashboards in Grafana that use Prometheus work fine but the piHole one just says no data. I have restarted all of the containers and deleted and re-imported the template.
  6. When I set up piHole I am getting an error of connection refused in Prometheus and then it is obviously not working in Grafana. Below are my configs, if someone sees something wrong any help would be appreciated. Error in Prometheus (4th one is piHole): piHole Exporter: PiHole: Thanks in advance
  7. Hoping you guys could help me with this issue I am having. Recently whenever I watch a video that comes from a large file my entire server locks up after a little bit and I have to restart the Plex container. What I have come to notice is that basically Plex is filling my ram with whatever the file is I am watching as I am watching. For example if I am watching a 40GB BluRay movie that is 90 minutes, after 90 minutes my Plex container will be using 40GB, issue is I only have 32GB of ram in my server and I cant even give it all of that amount. When I stop watching the movie the ram is given back. Some notes that might help: DLNA is off Everything is generally direct play (exception of audio transcoding) I have updated to the newest verion of PMS When I stop watching the video all of the memory is given back. This is after watching Top Gun for 30 minutes: Here is the config if that helps: Let me know if I can pull any other logs that would help with this Any help is appreciated.
  8. I have a container that needs to be routed though a VPN with a dedicated IP (I use private internet access). Anyone have ideas on how I can accomplish this? I currently do have a binhex-delugevpn container running that uses the same VPN but I can not figure out how to make it work with the dedicated IP. I know if I could get that working I can route this other container though the Duluge container and then it would work. Reasoning for doing this is I have a service I want to access outside of my home and due to having community wifi I am stuck with a double-nat situation and this seems like the best way to resolve it. Any help is appreciated. Thanks
  9. If someone could take a look at my XML it would be super helpful. I can not get my VM to sign into Apple Services. I have changed the network adaptor and tried a couple different configs. <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='23' xmlns:qemu=''> <name>Macinabox BigSur</name> <uuid>88b75df0-9fdb-435d-b07f-f8d5ac24775f</uuid> <description>MacOS Big Sur</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="BigSur.png" os="osx"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='4'/> <vcpupin vcpu='2' cpuset='1'/> <vcpupin vcpu='3' cpuset='5'/> <vcpupin vcpu='4' cpuset='2'/> <vcpupin vcpu='5' cpuset='6'/> <vcpupin vcpu='6' cpuset='3'/> <vcpupin vcpu='7' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-4.2'>hvm</type> <loader readonly='yes' type='pflash'>/mnt/user/system/custom_ovmf/Macinabox_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/88b75df0-9fdb-435d-b07f-f8d5ac24775f_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Macinabox BigSur/macos_disk.img' index='1'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:9e:76:8a'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='e1000-82545em'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-23-Macinabox BigSur/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='connected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='' keymap='en-us'> <listen type='address' address=''/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check'/> </qemu:commandline> </domain>
  10. Got it so the reason it looked like their was so much more data on the drive is it replicated the data on each drive and counted it. Thanks.
  11. Thanks for the response. I have a couple questions though if you could help. If the space is limited to twice the size of the smallest drive it should be (256x2) which is 512, but in the screenshot it shows about 537GB of space. Secondly it is showing in the screenshot that the size is 756GB, is it normal for that to not reflect the actual size based on btrfs profile? I have looked around to try and find what profile the pool is in but have not found anything, do I need to turn off my array to change that? EDIT: Just found the "convert to single mode" button under that balance settings. Ill give that a go.
  12. I added a second drive (256GB) to my 512GB cache pool, instantly it started to do a btrfs balance. When this started there was ONLY 200ish GB of data in the pool. At first it looked right and was showing 750GB total space, but once it was done it only has 1GB free and it shows it only has a total of 537GB not 750GB of space. I have restarted my server, ran a btrfs scrub and tried to balance again. Any ideas how to fix?
  13. Still getting errors. I did bind the gpu to the vfio as it says. Any ideas? EDIT: I was able to manually edit a vbios I found online to get it to work in my VM. Turning off GUI mode did at least make that part of setting up a VM work, just cant get this script working.
  14. Getting stuck here every time. Any idea why it will not start the temp vm? I have already tried deleting the folder where it is supposed to save the vBIOS I have to force shutdown after this as you cant cancel the script correctly and the array will not unmount the disks. When restarting this VM was stood up, but starting it freezes everything as well.