Realterminator

Hello everyone, I had a kernel panic today. Some setting on the network card does not seem to be ok. Have any of you seen this or even managed to solve it? 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 54 IOMMU group: 10 ... Kernel driver in use: r8168 Kernel modules: r8169, r8168 root@Storage:~# ethtool -i eth0 driver: r8168 version: 8.052.01-NAPI firmware-version: expansion-rom-version: bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no root@Storage:~# modinfo r8168 filename: /lib/modules/6.1.64-Unraid/kernel/drivers/net/ethernet/realtek/r8168.ko.xz version: 8.052.01-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> [Thu Feb 8 13:00:16 2024] r8168: loading out-of-tree module taints kernel. [Thu Feb 8 13:00:16 2024] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [Thu Feb 8 13:00:16 2024] r8168 0000:01:00.0: enabling device (0000 -> 0003) [Thu Feb 8 13:00:16 2024] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [Thu Feb 8 13:00:16 2024] r8168 Copyright (C) 2023 Realtek NIC software team <[email protected]> [Thu Feb 8 13:00:16 2024] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [Thu Feb 8 13:00:16 2024] r8168 0000:02:00.0: enabling device (0000 -> 0003) [Thu Feb 8 13:00:16 2024] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [Thu Feb 8 13:00:16 2024] r8168 Copyright (C) 2023 Realtek NIC software team <[email protected]> [Thu Feb 8 13:00:18 2024] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [Thu Feb 8 13:00:18 2024] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [Thu Feb 8 13:00:18 2024] r8168 Copyright (C) 2023 Realtek NIC software team <[email protected]> [Thu Feb 8 13:00:18 2024] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [Thu Feb 8 13:00:18 2024] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [Thu Feb 8 13:00:18 2024] r8168 Copyright (C) 2023 Realtek NIC software team <[email protected]> [Thu Feb 8 13:06:31 2024] r8168: eth0: link up [Thu Feb 8 13:06:35 2024] r8168: eth1: link up [Thu Feb 8 13:26:11 2024] r8168: eth0: link up [Thu Feb 8 13:31:07 2024] r8168: eth1: link up [Thu Feb 8 13:41:47 2024] r8168: eth0: link up [Thu Feb 8 23:14:11 2024] r8168: eth1: link up ... [Sat Feb 10 00:46:12 2024] r8168: eth1: link up [Sat Feb 10 01:35:56 2024] r8168: eth1: link up [Sat Feb 10 01:43:00 2024] r8168: eth1: link up [Sat Feb 10 01:48:23 2024] r8168 0000:01:00.0 eth0: test_phy_ocp ResetPhyType = 0x02 [Sat Feb 10 01:48:30 2024] WARNING: CPU: 11 PID: 16114 at /usr/src/unraid-r8125-r8152-driver/r8168/src/r8168_n.c:8418 rtl8168_wait_phy_state_ready.isra.0+0x50/0x64 [r8168] [Sat Feb 10 01:48:30 2024] Modules linked in: macvlan udp_diag cdc_acm xt_CHECKSUM ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle vhost_net tun vhost vhost_iotlb tap xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_addrtype br_netfilter xfs md_mod zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) tcp_diag inet_diag corefreqk(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables efivarfs bridge stp llc r8168(O) amdgpu edac_mce_amd edac_core intel_rapl_msr intel_rapl_common iosf_mbi kvm_amd kvm gpu_sched drm_buddy i2c_algo_bit drm_ttm_helper ttm drm_display_helper crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 wmi_bmof aesni_intel drm_kms_helper crypto_simd ahci cryptd drm rapl libahci k10temp i2c_piix4 nvme amd_sfh agpgart nvme_core i2c_core syscopyarea ccp sysfillrect [Sat Feb 10 01:48:30 2024] sysimgblt fb_sys_fops tpm_crb video tpm_tis tpm_tis_core wmi tpm backlight acpi_cpufreq button unix [last unloaded: r8168(O)] [Sat Feb 10 01:48:30 2024] Workqueue: events rtl8168_esd_task [r8168] [Sat Feb 10 01:48:30 2024] RIP: 0010:rtl8168_wait_phy_state_ready.isra.0+0x50/0x64 [r8168] [Sat Feb 10 01:48:30 2024] ? rtl8168_wait_phy_state_ready.isra.0+0x50/0x64 [r8168] [Sat Feb 10 01:48:30 2024] ? rtl8168_wait_phy_state_ready.isra.0+0x50/0x64 [r8168] [Sat Feb 10 01:48:30 2024] rtl8168_esd_task+0x6e0/0xc0e [r8168] [Sat Feb 10 01:48:31 2024] WARNING: CPU: 11 PID: 16114 at /usr/src/unraid-r8125-r8152-driver/r8168/src/r8168_n.c:8654 rtl8168_wait_phy_ups_resume+0x4a/0x57 [r8168] [Sat Feb 10 01:48:31 2024] Modules linked in: macvlan udp_diag cdc_acm xt_CHECKSUM ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle vhost_net tun vhost vhost_iotlb tap xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_addrtype br_netfilter xfs md_mod zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) tcp_diag inet_diag corefreqk(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables efivarfs bridge stp llc r8168(O) amdgpu edac_mce_amd edac_core intel_rapl_msr intel_rapl_common iosf_mbi kvm_amd kvm gpu_sched drm_buddy i2c_algo_bit drm_ttm_helper ttm drm_display_helper crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 wmi_bmof aesni_intel drm_kms_helper crypto_simd ahci cryptd drm rapl libahci k10temp i2c_piix4 nvme amd_sfh agpgart nvme_core i2c_core syscopyarea ccp sysfillrect [Sat Feb 10 01:48:31 2024] sysimgblt fb_sys_fops tpm_crb video tpm_tis tpm_tis_core wmi tpm backlight acpi_cpufreq button unix [last unloaded: r8168(O)] [Sat Feb 10 01:48:31 2024] Workqueue: events rtl8168_esd_task [r8168] [Sat Feb 10 01:48:31 2024] RIP: 0010:rtl8168_wait_phy_ups_resume+0x4a/0x57 [r8168] [Sat Feb 10 01:48:31 2024] ? rtl8168_wait_phy_ups_resume+0x4a/0x57 [r8168] [Sat Feb 10 01:48:31 2024] ? rtl8168_wait_phy_ups_resume+0x4a/0x57 [r8168] [Sat Feb 10 01:48:31 2024] ? rtl8168_wait_phy_ups_resume+0x37/0x57 [r8168] [Sat Feb 10 01:48:31 2024] rtl8168_esd_task+0xb99/0xc0e [r8168] [Sat Feb 10 01:49:04 2024] r8168: eth0: link up [Sat Feb 10 02:02:59 2024] r8168: eth1: link up [Sat Feb 10 02:11:24 2024] r8168: eth0: link up

<interface type='direct'> <mac address='52:54:00:66:be:a8'/> <source dev='eth0.20' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface>

I have eth0 as mgmt interface Vlan interface eth0.10 an eth0.20 For Docker I can select eth0.20 without problems. But how can I connect a VM to interface eth0.20? Only virbr0 can I select from Gui. I think I have to insert the network card directly in the xml, the question is only what exactlyTahnks This is not working <interface type='bridge'> <mac address='52:54:00:66:be:a8'/> <source bridge='eth0.20'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Thanks for the help

Fix is: add device to container USBDEVICES is only that permissions set to device inside the container

Have approximately the same question: ----- Debugging information ----- ----- ----- ----- System ----- ----- arch: x86_64 ----- ----- ----- ----- Versions ----- ----- image: v5.1.0 ----- ----- node: v12.21.0 ----- ----- npm: 6.14.11 ----- ----- ----- ----- ENV ----- ----- SETGID: 100 ----- ----- SETUID: 99 ----- ----- USBDEVICES: /dev/ttyACM0 ----- ------------------------------------------------------------ ----- Step 4 of 5: Applying special settings ----- ------------------------------------------------------------ Some adapters have special requirements/ settings which can be activated by the use of environment variables. For more information take a look at readme.md on Github! Usb-device-support is activated by ENV. Setting permissions for /dev/ttyACM0... chown: Zugriff auf '/dev/ttyACM0' nicht möglich: Datei oder Verzeichnis nicht gefunden chmod: Zugriff auf '/dev/ttyACM0' nicht möglich: Datei oder Verzeichnis nicht gefunden On Unraid root@Storage:/dev/serial/by-id# ls -al /dev/ttyACM0 crw-rw-rw- 1 root dialout 166, 0 Mar 2 17:39 /dev/ttyACM0 Can anyone help me with this?