harrison.guo
-
Posts
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by harrison.guo
-
i see this post,mabe i can try umount -l /mnt/user I'll try this method tomorrow,
-
yes ,I saw these problems in the system log，I not running vm and darker.but i can't stop Array，i'm in win10 pc Mount the network hard disk,Should I disconnect the link,Or is there any other way to solve it?
-
停止阵列一直显示 阵列正在停止•重试卸载用户共享 如图 除非重启系统，不然无法解决问题 附上诊断tower-diagnostics-20230218-2256.zip
-
在更新6.11.3之后无法启动，提示FST-fs sda1 error invalid access to FAT 拔掉所有硬盘都是如此，u盘也没问题，能正常写入读取
-
如下， 日志占用极高，查看日志指向一个文件，请问有什么方法解决，重启除外 以下为文件的代码 tower-diagnostics-20220922-2321 (1).zip
-
win10ltsc，I'm not sure if I'm using the lite version of the system. After I installed it using the official image, it was successful. The task manager has uhd630 but the video encode & decode didn't work, only 3D was occupied, whether I used the vnc window or RDP. , parsec still does not work properly, but this is also good news, at least half of the success, as long as you can find a way to solve the encoding problem. I have hevc extension installed
-
When I install the graphics card driver, it prompts 'No drivers that can be installed on the current device are found, error code 8', the log is in the attachment IntelGFX.log
-
Parsec can't connect, I have set decoder as software, but still can't connect
-
Yes, I have used it, but the result is the same，Attach my vm settings I'm not using a ramdisk since I pass through the nvme harddisk, but I don't think that's the source of the problem
-
I don't know why, I can see uhd630 in the device manager, but there is no such device in the task manager, and youtube video playback has no effect tower-diagnostics-20220611-2359.zip
-
6.10.0-3升级6.10.0-4后，内存占用变高，24g内存占用已经达到90%，升级前一样的docker和虚拟机只占用60的样子，使用top查看发现大量内存被系统缓存了，如图，顺便附上诊断记录 tower-diagnostics-20220419-2203.zip
-
move: create_parent: error: No space left on device
harrison.guo replied to harrison.guo's topic in General Support
Thank you for reminding me. When sending a new report, I reset the available space of two shared folders to 0KB for saving, and then executed move, and found that they were successfully moved to the array. Your answer also verified that this was the problem. It may be that two disks were used before, and these configurations did not change automatically when the hard disks were removed. I hope this problem can be improved in the future. Thank you! -
move: create_parent: error: No space left on device
harrison.guo replied to harrison.guo's topic in General Support
thanks，The new diagnosis result has turned off the anonymous option tower-diagnostics-20211120-0443.zip -
Timed move failed to move the cache to the array. After the move was executed, the cache disk space was still not released. Check the log and report an error, as shown in Figure 1. However, each hard disk has sufficient space. The minimum available space of the shared folder is set to 0kb, so there is no problem of insufficient space. Strangely, I use SSH to move the cache disk files to the array hard disk through the command. The problem still exists after restart Also attach the diagnostic log tower-diagnostics-20211117-2212.zip
-
定时move移动缓存到阵列内失败，执行move之后缓存盘空间依旧没得到释放，查看日志报错如图1，但是我每个硬盘空间非常充足，共享文件夹设置最小可用空间为0KB，不存在空间不够的问题。 奇怪的是，我使用ssh通过命令将缓存盘文件移动到阵列硬盘就没问题。 附上诊断日志 tower-diagnostics-20211117-2212.zip
-
使用环境：目前是1t+12t+4t+200g(ssd)放在阵列内，其中1t+12t拿来做pt下载保存电影；4t负责保存自己的出去拍的视频，200g负责保存虚拟机的硬盘和docker的镜像等(感觉这些东西放在ssd启动更快) 需求： 基于unraid对校验盘的说明，我必须使用一块12t的硬盘才能添加为校验盘，但是我不想保护那两块下载盘（数据不重要），想添加一块4t保护那两块存资料的硬盘，目前找到的方案分为两种： 1.就是把下载盘做为一个缓存池，添加共享，设置仅缓存，然后选择这个缓存池； 2.将硬盘移出阵列，使用Unassigned Devices挂载硬盘，这样就有两个问题，1.挂载的硬盘会不会有速度损耗或者增加cpu负担。2.添加缓存后数据会不会走缓存 还有两个问题：3.看见论坛有说下载盘不建议添加到阵列，推荐新建缓存池使用，说是这样可以减轻硬件负担，不知道是不是真的。4.看见反馈说添加校验盘后读取速度会大幅下降（据说只有60-70），目前没有校验盘千兆内网是能跑满的，这个速度衰减通过ssd缓存是不是能得到改善？ 问题较多，麻烦各位解答！
-
直通sata控制器后连接在这个控制器上的硬盘不算的，因为这个控制器unraid已经失去了访问权了，我之前就是这样套黑裙的，现在已经全部迁移过来了
-
还是不行，我试过使用全新u盘全新安装，依然不行，只能怀疑硬件问题
-
依然没解决，我甚至尝试过使用新的优盘，以及把原有的硬盘全部拆下来，然后拔掉所有网口使用的网线拔掉，此时它就相当于是全新的系统了，依然会有这个问题。我现在怀疑是这个网卡的兼容性问题
-
奇怪的是，我把可以直通的网口全部取消， 掉，然后直通这几个不能直通的网口。依然能成功。要是把那几个一起直通就不行。
-
升级6.9之前把直通全部关闭了，vm里面的勾选也取消了。升级到6.9之后，重新直通问题依然存在
-
Network card model: rtl8111g （4 network port*2） In version 6.8.3, the pass through is normal. After updating to 6.9.2, the pass through error occurs. The two network cards can only pass through one and two network ports respectively,After attempting to uninstall the vifo PCI plug-in, cancel the pass through, restart the system（All network cables have been unplugged before straight through）, and then restart the pass through, the problem still cannot be solved Partial log --- Processing 07:00.0 Warning: You did not supply a PCI domain, assuming 0000:07:00.0 Warning: You did not specify a Vendor:Device (vvvv:dddd), unable to validate 0000:07:00.0 IOMMU group members (sans bridges): /sys/bus/pci/devices/0000:07:00.0/iommu_group/devices/0000:07:00.0 Binding... /usr/local/sbin/vfio-pci: line 169: /sys/bus/pci/devices/0000:07:00.0/iommu_group/devices/0000:07:00.0/driver/unbind: Permission denied Unbound 0000:07:00.0 from r8169 chown: cannot access '/dev/vfio/14': No such file or directory Error: unable to adjust group ownership of /dev/vfio/14 --- At present, it can only be restored to 6.8.3 through backup, but I need version 6.9 Chinese language pack tower-diagnostics-20210825-2119.zip vfio-pci.txt
-
日志错误如下 --- Processing 07:00.0 Warning: You did not supply a PCI domain, assuming 0000:07:00.0 Warning: You did not specify a Vendor:Device (vvvv:dddd), unable to validate 0000:07:00.0 IOMMU group members (sans bridges): /sys/bus/pci/devices/0000:07:00.0/iommu_group/devices/0000:07:00.0 Binding... /usr/local/sbin/vfio-pci: line 169: /sys/bus/pci/devices/0000:07:00.0/iommu_group/devices/0000:07:00.0/driver/unbind: Permission denied Unbound 0000:07:00.0 from r8169 chown: cannot access '/dev/vfio/14': No such file or directory Error: unable to adjust group ownership of /dev/vfio/14 --- vfio-pci.txt tower-diagnostics-20210825-2119.zip
-
当前版本为6.8.3，有两张4口rtl8111g的pcie网卡，直通正常，当更新到6.9.2（系统在线更新或者重新写入u盘）之后，原本直通的八个网口就只能直通五个，第一张网卡，四个全部直通的，另一张只能直通一个，工具内现在是已经直通了的，但是页面内绿色圈圈并没有亮起，如图所示， 通过备份下来的压缩包恢复到6.8.3之后一切正常。 希望提供一些解决方案。
