dangitzin

I tried this yesterday.... but I must have been so irritated of stuff not working that I messed up somewhere and it didn't work. Worked for me today though. Thanks for pointing me back to this post.

I finally got my private key using the a vm/linux method. I'm able to access my ARRs and qbit wGUI through NordLynx but the only issue I have now is it's not connecting to the external internet. Were there any settings you set in NordLynx other than your private key?

how do i set up /nordvpn to work with just the token? I've added the variable TOKEN and copy/paste what generated from my account, but it still doesn't seem to work, the container will just stop after a few seconds. I'll use nordvpn or nordlynx, whichever I get to work first. I've been stuck all day fiddling around but no luck.

My nordvpn container stopped working yesterday and found out today that it's no longer maintained and I'm trying to migrate over to NordLynx container. I'm having trouble getting my PRIVATE_KEY. It says A new version of NordVPN... Make sure your credentials are correct, and if MFA enabled verbage. My MFA is disabled and I've changed my PW multiple times already to contain only numbers and letters, then in 10 characters, then under 10 characters, tried the downgraded the original nordvpn to 3.12.3 and also tried tmknight88/nordvpn but it seems like these containers no longer can connect (maybe on nord's end?). I'm not too savvy with this stuff and when I initially set everything back in unRaid 6.9.2 and now 6.11, everything just ran smoothly. Any help figuring this would would be greatly appreciated!

Ok so it's definitely either sonarr or radarr doing it. I'm back to loss I had on Saturday. Movies were the first thing I transferred over and I hit update all so the titles could catch the files. Everything was fine there and saw everything I had. Just now my I did the same with sonarr, except while it caught some titles at first, I saw my file size shrink back down again. I immediately stopped both containers, and well I'm back to the same loss I had on Saturday. I don't have anything that indicates deletion in either container's settings but when clicking on the info icon of a file it states Sonarr/Radarr was unable to find the file on disk so it was removed. Maybe something's wrong with my paths? But I haven't changed anything since I started and followed ibracorp/trash-guides structure ----> /data/media/tv, movie, etc. I've clicked update all before without issue, but this happens now? I'm guessing this is exactly what happened when I lost data on Saturday.

The first diagnostic was when I was asked to post it and I haven't done anything yet. Then I removed the disk2 two to dock it into my PC to use UFS. The second diagnostic I started the array without my disk2 and I believe that's when I invalidated my array. I've spent the last couple days transferring my files back into the array and I'll just have to re-download the rest. Is there anything I can do to prevent this from happening again? Like a way to to clean up my docker with items that are no longer showing but are actually still in /appdata - would a simple smb delete do?

miku-diagnostics-20210607-1236.zip

I've stopped my array and pulled the drive out to check. Is that still a no-no? As for my share, I have "data" then subfolder "media" and inside it are "anime" "movies" "tv" with no repeating subfolders with different capitalization in each respective subfolder, just the folders of titles.

Is it okay to post it as this zip? Or is there a specific thing I need to post? miku-diagnostics-20210605-2250.zip

I had Radarr, Sonarr, and deluge running. Deluge was only seeding and I un-monitor any titles that have completed series or I’m satisfied with the quality but those too were deleted. Anything to that has to do with deletion I unchecked in the arr’s and plex. And even if I had something still monitored for upgrade, it wouldn’t get deleted until the replacement finished downloading then imported. In UFS Explorer, I see the data that wasn’t deleted so I’m running a scan right now. You’re right though, files don’t just disappear and something deleted those files. I just don’t know what caused it. Since my server is new and I’m only interested in having this as a media server, I don’t have much installed or running. Bubuntex/Nordpvn, binhex-deluge, hotio-jackett/Radarr/Sonarr, Rebuild-DNDC and plex are the only things that were running at the time.

I happened to glance at the dashboard and noticed one of my disks only had ~3% utilization and the other ~30%. I have 2 6tb disks in my array and with high-water selected, they were supposed to be close in how much space was used up -- about 42% in total. I thought it was an error so I checked my plex for a random movie and it couldn't find the file. Then I decide to rescan my library and saw my movies library drop in count. I hopped on the computer to check radarr with to check the missing files and sure enough, the status' went from "Downloaded" to "Missing". Not just my movies folder, but I guess most of everything on disk 2 was deleted. Luckily my server is only 1 week old and I haven't accumulated that much and I have some of the media on my PC's hard drives still and all my important things are in another share/drive/extrernals/clouds (basically 3-2-1 method of backups). Not sure what happened. Then I noticed my Disk 1 went from 2.19TB down to 1.73TB so I stopped my array in the mean time so I can ask here if there's anything I can do or am I just SOL? Like I said, luckily it's all just media data that deleted but it's going to suck getting everything back that I didn't already have since I can only use public trackers. I had hardlinks setup properly too, but I guess all those disappeared as well.

I happened to check the log because my downloads/uploads speeds were dropping until it hit 0 but I guess it was the container acquiring a new ip. Was that what you meant by the killswitch is built in? Anyways I found this line show up a couple times since starting the service and I remembered this post. I didn't do anything except add some ports to the container. Is this normal or is there any variables I can put in to enable it? Or it already is enabled because of the event I described and it's just showing up as disabled?

cool the nordvpn container itself is working and running through a vpn. how do i get containers like torrent clients & sonarr to work? i tried the --net=container:nordvpn but still can't load up web ui figured it out. had to edit nordvpn contain show advanced view then add the ports for each other container. then tick "Required: Yes"

I have a new build and getting ready to transfer big chunks of data over. I was planning on using rsync but this happens to the terminal window after a few seconds. I originally thought it was because I had ad-blockers and anti-tracker plugins so I've disabled/whitelisted unraid on them. Happens both on edge and chrome.

Good thing I hit up the last page. This solved all my issues and weirdness I was having trying to log into my server. Weird stuff with trying to log on after setting up remote access on my first and new unraid build. VPN off: Chrome & Edge - I can't login in locally with the 192.x.x.x goes straight to the x1x1x1x1x1x1.unraid.net "this site can't be reached" forums.unraid.net/my-servers/ --- shows local access and obviously clicking it is what happens same as above VPN on: Chrome (split-tunnel) - 192.x.x.x can't be reached which should be expected, but can remote access via my servers dashboard Edge (not tunneled) - 192.x.x.x goes to x1x1x1.unraid.net logon screen and able to login. Other websites don't work? VPN on: Chrome (not tunneled) - 192.x.x.x to x1x1x1.unraid.net logon works. My servers dashboard "access unavailable". Google and searching works but other websites don't? Edge (split-tunnel) - remote access available from my servers dashboard. basically I can't get in locally unless my VPN is on and even with it on, it's only accessible locally when it's not being tunneled out? I'm brand new to all this so I'm pretty sure it's user error at some point during set up and I at least have someway to get in but this all seems so clunky. Am I able to just start over without having to go through parity again?