Hi
I've been enjoying using stock unraid pro for a few years now but would like to jump in with some of the add-ons that this community has worked hard on.
I'd appreciate any help as I work through troubleshooting some issues.
Right now- I am trying to install the sabnzbd package but whenever I try to installpkg it goes through the process and then everything in /boot disappears. The same thing occurs if I just boot up unraid and copy my syslog to the /boot folder.
I pull the flash drive and run a chkdisk on it in windows and it fixes corruptions, then safely remove it and restart unraid but the issue occurs again. This leads me to think the flash is getting set it to read-only but I do not see that occurring in the syslog which I have attached.
I recently upgraded my unraid to include a cache drive which I had to also install a new sata 2port pci card.
I bought the 2port card from monoprice- but I have not updated the firmware for it. I just need one port on it and it appeared to be working when I successfully set up the cache drive.
parity checks run successful but since the /boot is disappearing so anytime I restart the server it runs through another parity check.
Unraid version 4.5.4
I'm not sure if my flash drive is possibly failing?
or if this is from the hardware upgrade.
Any suggestions on next steps?
I'll probably remove the cache drive and sata card this evening and restart unraid to see if I see the same issues.
And run through a memtest
After I telnet in I believe these are the errors occurring:
Dec 1 12:53:24 Tower kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 2
Dec 1 12:53:24 Tower kernel: usb 1-5: device descriptor read/64, error -71
Dec 1 12:53:24 Tower kernel: usb 1-5: device descriptor read/64, error -71
Dec 1 12:53:25 Tower kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 2
Dec 1 12:53:25 Tower kernel: usb 1-5: device descriptor read/64, error -71
Dec 1 12:53:25 Tower kernel: usb 1-5: device descriptor read/64, error -71
Dec 1 12:53:25 Tower kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 2
Dec 1 12:53:26 Tower kernel: usb 1-5: device not accepting address 2, error -71
Dec 1 12:53:26 Tower kernel: usb 1-5: reset high speed USB device using ehci_hcd and address 2
Dec 1 12:53:26 Tower kernel: usb 1-5: device not accepting address 2, error -71
Dec 1 12:53:26 Tower kernel: usb 1-5: USB disconnect, address 2
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] Unhandled error code
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 d2 b3 00 00 70 00
Dec 1 12:53:26 Tower kernel: end_request: I/O error, dev sdb, sector 53939
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] Unhandled error code
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
Dec 1 12:53:26 Tower kernel: sd 0:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 08 24 00 00 01 00
Dec 1 12:53:26 Tower kernel: end_request: I/O error, dev sdb, sector 2084
Dec 1 12:53:26 Tower kernel: Buffer I/O error on device sdb1, logical block 1985
Dec 1 12:53:26 Tower kernel: lost page write due to I/O error on sdb1
Dec 1 12:53:26 Tower kernel: FAT: Directory bread(block 2296) faile
My hardware specs.
256 mb sandisk cruzer usbdrive
mobo ECS A740GM-M
Crucial Ballistix Tracer 2GB
AMD Athlon X2 4050e Brisbane 2.1GHz
Antec 380w earthwatts
SATA2 Serial ATA II PCI-Express RAID Controller Card (Silicon Image SIL3132)
5 sata drives
1 cache drive
a few fans and fan controller in a centurion 590 case
syslog_120110_105.txt