Foleykins

I ended up getting all sorts of errors, I was able to backup my most important stuff off of Unraid due to having 2 parity drives. Might be easier to delete the whole array and start over?

@JorgeB I ran both commands and posted the output below. Thank you for the help you are providing. root@Tower:~# btrfs fi show Label: none uuid: a03b8944-2fb1-4c60-9cbe-7ca6b18cc789 Total devices 1 FS bytes used 7.15TiB devid 1 size 10.91TiB used 9.25TiB path /dev/mapper/md1p1 Label: none uuid: 56f7e42d-cd5a-491c-bc94-3a35bcd46843 Total devices 1 FS bytes used 4.61TiB devid 1 size 10.91TiB used 4.72TiB path /dev/mapper/md2p1 Label: none uuid: 87979a6f-edcb-4886-ba43-e909bd812a41 Total devices 1 FS bytes used 11.90TiB devid 1 size 12.73TiB used 12.56TiB path /dev/mapper/md5p1 Label: none uuid: 104b676a-602f-4189-9eea-5ef5b133791d Total devices 1 FS bytes used 144.00KiB devid 1 size 10.91TiB used 3.02GiB path /dev/mapper/md7p1 root@Tower:~# blkid /dev/sda1: LABEL_FATBOOT="UNRAID" LABEL="UNRAID" UUID="2736-60C3" BLOCK_SIZE="512" TYPE="vfat" /dev/loop1: BLOCK_SIZE="131072" TYPE="squashfs" /dev/sdf1: UUID="0e1a1f2a-5d25-467e-953b-fe337dbeef3f" TYPE="crypto_LUKS" PARTUUID="c826d723-882d-4907-82bb-e8ab841d9ecf" /dev/sdg1: LABEL="cache" UUID="16723579336533422522" UUID_SUB="6378610447672026771" BLOCK_SIZE="4096" TYPE="zfs_member" /dev/loop0: BLOCK_SIZE="131072" TYPE="squashfs" /dev/sdk1: UUID="f0c23d59-e7db-44da-b2ad-15487ef39c9c" TYPE="crypto_LUKS" PARTUUID="b6634d83-c86d-4e20-ac51-320fe7de79bc" /dev/sdl1: UUID="67e6d85e-9437-4ceb-9fa8-f7d621ab2eb8" TYPE="crypto_LUKS" PARTUUID="ed182c8d-4edd-4ae4-9550-8f55d7eeac1e" /dev/sdd1: UUID="80e22954-d4df-4d2f-be1c-3c61def4b93d" TYPE="crypto_LUKS" PARTUUID="c3a8ac52-4e24-4f15-a3cb-f33d88ef9e08" /dev/sdb1: UUID="849fe34a-2b77-4064-bf6e-9147c2e66418" TYPE="crypto_LUKS" PARTUUID="cf4cf758-71fa-40be-896e-bbc8e994d7a1" /dev/sdi1: PARTUUID="72e49836-63e1-4190-92f5-b4f59cf70df5" /dev/sde1: UUID="55d6b5c6-4cc7-4189-9a81-5b1f73d3192f" TYPE="crypto_LUKS" PARTUUID="944feb2d-12b1-45b8-a40a-18725dbbfb3b" /dev/sdj1: PARTUUID="c6abf532-e821-479c-9c47-e26d3074e9a8"

@JorgeB I removed disk 4 as you suggested and ran a new diagnostic right after. I did not touch Disk 6. Here is the new diagnostic. tower-diagnostics-20250526-1814.zip

Ok will do thank you @JorgeB I will try

I started the array in maintenance mode and ran btrfs check on both drives: ERROR: superblock checksum mismatch ERROR: superblock checksum mismatch No valid Btrfs found on /dev/mapper/md4p1 ERROR: cannot open file system Opening filesystem to check...

I have 2 parity disks in my unraid system, both parity disks are fine. In the array I have 2 disks with a problem, disk 4 yellow triangle says disk contents emulated and disk 6 red x says disk is disabled. Both say BTRFS unmountable no file system. The file system is BTRFS Encrypted. This started after the server lost power due to a building wide power All smart tests showed OK for both drives. outage. tower-diagnostics-20250525-1948.zip If anyone could advise how I can fix this problem I would be very thankful. Is there a procedure I could follow?

Lama Cleaner and FaceFusion can't find git and other items, Easy, Automatic worked fine. Can you push an update or tell us a fix?

tower-diagnostics-20230811-2238.zip Cache marked read only but it should not be full, can you please provide any way to fix it?

I am logged in with the latest version but I am seeing that error all the time. Any advice?

Upgraded from 6.9.2 to the latest 6.11.5 - Need help with SSL I had SSL working the old way but I am unsure now on what to delete to get the local browser back to its secure state?

Will do

Hi Jorge, here is the logs from the diagnostic with errors for disk 7. tower-diagnostics-20221126-0703.zip

Jorge, I am rebuilding the array again, so will wait for the errors to show again. There was like 12 million read errors for disk 7., disk 8 is rebuilding now.

Just in case this helps I have a IBM 46M0997 ServeRAID 16-Port SAS Expander Expansion Adapter plugged into a IBM H1110 SAS Card (I think 9211-4i FW 9211-8i P20 IT Mode is the equivalent but I am not sure)