tabish121

I had a similar issue with a newer USW Flex 2.5g switch that just would not adopt while all my other devices had no issues. I read a ton of posts about this sort of thing and checked what my server was set to do and it did seem to be handing out the host name of my server. I overrode the inform host value to be the UnRaid server IP and it worked perfectly afterwards so I'd try that.

You can add your sensors into the drivers.conf file and that should make them appear in the plugin settings (might need to stop / start the array). In a terminal window type: touch /boot/config/plugins/dynamix.system.temp/drivers.conf and after that nano /boot/config/plugins/dynamix.system.temp/drivers.conf add the following lines: it8613 k10temp nvme press ctrl + o followed by enter followed by ctrl + x to write your changes and exit.

I've had a preclear running on a new 8TB WD Read drive and I checked a bit ago and things seemed to have gotten stuck, the preclear_disk process is pegged at 100% CPU I grabbed logs and attached here. TOWER-preclear.disk-20170714-1455.zip

Well in my case the SuperMicros fit just fine, the P80 has more than enough depth for them to fit. It looks as if the A77FA is almost as deep so you should be fine. I replaced the fans with these: Coolink SWiF2-92P PWM from QueitPC.com. You just need to make sure the fan has the four pin header.

I tried that but the front fans couldn't seem to keep them cool enough by themselves. Replacing the SuperMicro fans with some silent 92mm fans keeps the drive temps from topping 34C.

Just finished up my new unRaid machine this week. Here's the Specs: Case: LIAN LI PC-P80 Black Aluminum Tower Mobo: EVGA H55V 111-CD-E630-TR LGA 1156 Intel H55 CPU: Intel Core i3-530 2.93GHz Heatsink: Thermaltake Silent 1156 CLP0552 92mm CPU Cooler Mem: CORSAIR XMS 4GB (2 x 2GB) DDR3 PSU: SeaSonic X650 Gold 650W 80 PLUS GOLD Certified Modular HDD: 1 x WDC_WD20EARS 2TB 3 x WDC_WD10EACS 1TB 2 x WDC_WD15EADS 1.5TB 3 x WDC_WD10EADS 1TB Backplanes: SUPERMICRO CSE-M35T-1B Black (5in3) x4 SATA Card: Supermicro AOC-SASLP-MV8 x2 I replaced the fans in the 5in3's with quiet fans, the stock fans could cool the whole house. The rest of the fans that came with the Lian Li case are almost completely silent.