MasterPepe

Members
  • Posts

    15
  • Joined

  • Last visited

MasterPepe's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Sag mal, ist DEVONthink wirklich so gut wie es heisst? Wundere mich, bin eben auch am evaluieren von Diensten. Paperless ngx würde mir gut passen. Bei Devonthink habe ich eine Server Version gesehen. Aber leider wenig Doku die sagt, was genau für eine Umgebung dafür gut wäre.
  2. I also was looking for a seatable docker. Seems to be a useful tool.
  3. Vielen Dank euch Beiden, Ich war davor bei Jahrelang bei UPC. Auch bis kurz nach der Fusion von mit Sunrise. Handy war bei Sunrise. Mit UPC war ich zufrieden, aber die waren zumindest für mich, sehr Teuer. Und beide waren verhandlungsresistent. Bei UPC habe ich über Jahre mich immer wieder beschwert, das Neu-Abonennten besser dastehen als langjährige Kunden. Ich habe für 2 Fehrnseher und eine 600 MBit Leitung ganze CHF 178.-- im Monat bezahlt. Wie gesagt, Funktion und Service excellent. Gut... die lange Telefonschlaufe nicht. (Aber wo ist wie wohl schon gut). Erst als ich gekündigt habe, wollten Sie mir Gott und Teufel anbieten. Dann habe ich aber als Langjähriger Kunde schon genug gehabt von der hinhalte Taktik und bin dann einfach zum "Billigsten". Bisher war ich eigentlich recht zufrieden. Gut, bei UPC hatte ich mehr Cludspeicher inkl für TV und ein paar Sender mehr zum direkt Aufnehmen. Aber das ist für mich nicht wirklich tragisch. Der Salt Router scheint aber mittlerweile schon ein paar gute Einstellungen zu haben. Ich nutzte ihn allerdings nicht. Der läuft über einen DMZ direkt zu meinem Mikrotik und WLan ist auch separat. Ein Salt Modem mit öffentlicher IPv4 würde mir absolut reichen. @DoublemystZugegeben, dein Angebot klingt auch verlockend. Aber ich bin noch nicht lange dabei und Sunrise selber war es eher durchzogen. Der Preis war bei mir eher hoch und ein gutes Angebot habe ich auch nie erhalten. Vorerst versuche ich es noch ein bisschen bei Salt. Na dann... Versuche ich es mal mit der Fixen IP. Mal sehen ob die mit sich verhandeln lassen. Die Anderen Lösungen hier mit diesen VPNs, sind nach meinen Recherchen nicht mehr aktuell. Vielen Dank für eure Hilfe. Grüsse MP
  4. Hallo zusammen Ich habe das selbe Problem. Habe mir mal die Sophos Lösung angesehen. Aber von "Gratis" Version konnte ich nichts finden. Bei Salt soll eine fixe IP CHF 10.-- pro Monat kosten. Damit wäre das Problem erstmal gelöst. Ev. könnte man über IPv6 direkt auf den Server zugreifen. Aber wer macht sich die Arbeit mit v6 das zu Lösen? Für news wäre ich ebenfalls dankbar. Grüsse MP
  5. Well then... Thank you all for the help. I will try to make a 5 disk array. Hopefully I could use my other 3 disks as a type of Backup pool or for less important things. ...by the way, It is possible to write the files first to a cache pool and then the mover will move it to another pool? Or it works just with an array?
  6. Oh, then was the idea to put my 4 drives in a external Fantec Case not a really good idea. Could I may use it as a Pool device? Not Cache, just a BOD or even every disk in a separate Pool, but without the safety ob an array parity. Just for Backups and less important stuff.
  7. Do Sata multipliers in general generate Problems or just decrease performance? The performance on this disks shouldn't be an issue for me. But may to build the array.
  8. Thanks for the help. I was hoping that it might work after all. The Fantec Case has also a e-Sata connection. Unfortunately I couldn't make it work with the e-Sata connection of my motherboard. I have tried all combinations of BIOS settings. On my motherboard there still a sata connector free. It was for a CD-Rom drive and has a cable with different color. Option 1 Do I could may use this empty plug with an Sata Hard disk and then make at least an array with 5 disks? Option 2 Do I could may use this empty plug with an Sata to e-Sata adaptor and then try to connect my Fantec thru e-Sata? Have anyone experience with Sata connectors that came from the manufacturer in this configuration? Do somebody has any suggestions, that do not involve spend a lot of money for new hardware? Thanks again.
  9. Hello all, I have since a short power failure problems to start my array again. Since this is the first test server, I decided to install everything from scratch again. I wiped my hard drives with the precleaning tool and formatted them with xfs. I also did an extended SMART test on all the hard drives. This was also error free. I must say that I have a somewhat unusual setup. There is a cache pool with 2 mirrored SSDs installed. In the array I have 8 hard disks. Of these, 4 are connected in the server enclosure via SATA2 and 4 are connected in an external enclosure (Fantec) with USB3. One of the internal disks is used as parity. The first time I installed it, it worked fine. And since I address the hard disks individually, it even runs relatively performant. After a short power failure I got the error that 4 hard drives (the USB3 connected) showed an error. They could no longer be connected to the array. Now I'm standing there and can't get the array to run with empty disks. It starts to write the parity, after 0.8% it aborts. It comes the message with errors and the logfiles are overfilled. Apparently there is an abort at the USB. I can't stop the array then either. The disks are shown twice. Once in the array and once as Unasignd Mounted. I can only get to the disks when I reboot the server. This is still possible via the UI. I will leave the diagnostic and the logfile here. Hopefully someone can help. I would be very disappointed if I had to split the array. Thank you all for the help. MP syslog.txt.zip tower-diagnostics-20230310-2114.zip
  10. Thanks for your help. Then the recommendation is to use two separate graphics cards. For now, a T400 when I get it. Do I need a dedicated graphics card for the VM? Or does it depend on what you do with the VM? If I stream without a graphics card for the moment, do I have to consider anything in the settings? (Sorry, wrong thread)
  11. Thank for your help. The T400 also has an acceptable price, if it is available. I have seen that it "only" supports 3 sessions. Is that a issue? For example, if I transcode movies to H265 in one session, two people can still stream. Is that correct?
  12. Oh wow... Thanks for the help. I wanted to run the transcoding over it for Docker containers. And maybe the one or other VM. The server is a budget solution and an old computer. Is there a usable and cheap graphics card that can run the transcoding? And when I invest, then also in H265? Don't know what to do now.....
  13. Is this allright? Where exactly do you look for information? tower-diagnostics-20230228-2057.zip
  14. No VM's att all. No boundings that I know. The Installation is quite new.
  15. Hello all I have already searched in the forum and also on google. Unfortunately still without success. Perhaps someone can kindly help me or already has a solution for this problem. I have the classic error: NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. I have an Nvidia Quadro P4000 The driver is the v525.89.02 Unraid Version: 6.11.5 And yes, the Quadro 4000 is supported by the driver and is listed. Here is the list of system devices. The graphics card is listed and not bound. Could someone please help me with this? Thanks a lot! MP