jsteck

Hello, i am french!! someone could explain to me not to the step to put on a unraid the docker Readarr. I already have caliber and calibre-web to install on a unraid but to install readarr I do not understand very well the ports that it takes because it crashes every time I try. Thank you very much in advance.

hello everyone, I think I'm coming to the end, but I still have a little problem all the logs look ok there is no red, but I have a problem of ports I do not know in which direction they should meterent I have gluetunvpn and rutorrent!! gluetunvpn looks good it has ips with ports ms rutorrent has nothing I show you in photo

I did the flow capped at 370mb / sec. what to do so that I find my 900 / 1000mb / sec I am at Freebox delta with all my network in 10gb sfp + even as ca the flow is only reached with my fixed computer my laptop is also in 10 GB / sec and it does not reach it is values I just formatted it I do a test without further delay ... Thanks again

I tried the 2 NVMe in my PC so formatting and it goes up between 1GB/sec and 2GB/sec so it is not dead... There may have been a problem because once (I had started emptying the user0) I am new in unraid and I had thought that the user0 was a hacker (I was hacked a month and a half ago.... Biensure I stopped because I thought it was going to empty the whole array the error may come from here after put hacked I reset everything except the array

so I cached only and the speed of transfer between Windows and unraid has not changed .but there is an amazing thing transfers it on unraid remains at zero for a few seconds and goes up to 1.4gb for 2 seconds then goes down to zero five or six seconds and starts to go up quickly again very little time, I suspect the cache is dead. tower-diagnostics-20230612-2035.zip I change pc always in 10gbs it is a little faster I go up to 360mo / sec but there is always this funny phenomenon or the cache is not at constant speed on a unraid.

I move from my PC the Rain Man files to the folder Media / Videos/ (_films 4k_)Thanks again tower-diagnostics-20230612-1513.zip

Thank you for helping me here is the diagnosis! tower-diagnostics-20230611-1823.zip

Good evening, everyone! I don't know what I did but my cache doesn't work anymore! In the Share tab I have my folders with the cache activate! The cache runs slowly! speed and as fast as array (=180mo/sec) whereas before it could go up to 900mo/sec. How can I test my 2 nvme.m2 If anyone has an idea ! thank you in advance.

Hello and thank you for reading me. I have rutorrent crazymax to install with downloads and temp folders which have been blocked since the beginning I mean that I don't have access to them I see them I can copy the content of downloads, impossible to delete files it specifies that I don't have nobody access rights. the temp folder impossible to paste something in it does not specify nobody but it marks an error, the only way I found to delete the folders that were no longer useful to me is to open a terminal and put mc and from there I can delete with the f8 key. in my share the folders share downloads and write read I hope someone will help me thank you in advance.

j'oubliais je précise que mon vpn fonctionne.

Bonjour Tous!! comment faites vous pour mapper rutorrent crazymax avec 1 docker openvpn client, de plus je n arrive pas a ouvrir le port de mon openvpn (nordvpn) j'ai pourtant mis ce par defaut (1194)

Hello everyone, I start on Unraid and on the dockers I have on my Unraid Plex to install for 1 month. I would like to know if we can see the incoming and outgoing connection speeds for each docker currently I only have plex but that will change. I ask you this because I don't know if it's normal but on the outbound0 there is an almost constant flow or it comes out 45kilos / sec while I had noticed that when this one does nothing special it was at 3 or 4 kg/sec. So I would like to know where these strange flows come from. another question is it normal for Plex to choose port forwarding on its own (which works outdoors) without me opening anything in my router which is the Freebox delta?? Thank you for your answers

Bonjour a tous, je débute sur Unraid et sur les dockers j'ai sur mon Unraid Plex d installer depuis 1 mois. j'aimerais savoir si l on peut voir les débits de connexions entrante et sortante pour chaque docker actuellement j'ai que plex mais ca va changer. je vous demande ceci car je ne sais pas si c'est normal mais sur le outbound0 il y a un débits quasi constant ou il sort 45kilos/sec alors que j avais remarquer que lorsque celui ci ne fait rien de spécial il était a 3 ou 4 kilos /sec.. donc j aimerai savoir d ou proviens ces débits étrange. une autre question est ce normal que Plex choisisse tout seul ça redirection de port (qui fonctionne en extérieur ) sans que j ouvre quoi que se soit dans mon routeur qui est la Freebox delta?? merci pour vos réponses

ah je suis bien content que ca existe ici aussi! je vais l 'essayer de ce pas! merci encore Chatnoir

bonjour, Je cherche mais je ne suis pas sur que sur Unraid il y ai la possibilitée d'ajouter des corbeilles ou poubelles dans les dossiers partagés!!! merci pour vos reponses!!

thank you very much

Thank you for this information, if you could give me the procedure to follow because it's been a week that I search in the English forum and French even on redit, and since I am starting on a raid I am afraid to break everything thank you very much

I had created a pool but my server crashed after disabling the cache tower-diagnostics-20230421-1044.zip

Good evening, after filling my NAS server with data for the first time at par before I had put turbo write and disable cache now I can not reactivate them I have however 3 SSDs so 2 NVMe and 1 SATA I show you with JPG thank you in advance for the answers

il y a ça aussi ! dans le mover impossible il ne voit pas mes ssd !!! donc je ne sais que faire!! merci donc pour vos réponses

bonsoir, j'ai finis de transférer mais données et je voulais remettre le cache je ne sais pas si il faut remettre comme au départ le turbo write mais toujours est t'il que mes 3 ssd 2 nvme et un gros en sata son juste reconnues en dev je sais aussi que sans faire exprès j'ai lancer la vérifications de parités et je l'ai stopper!!! est ce que ca peux venir de ça ? je vais essayer de remettre le turbo write en mode normal merci pour votre aides

thank you I would be content with this until the end of all my data I will definitely put as a resolute

Thank you for this information, now I only read to find where it hides this turbo writing lol I found it!! Thank you very much I just found the method write! reconstruct write is the holy grail I go from 45-55 mo/sec to 85-95mo/sec

Okay but this exchange of very heavy files is really not moving fast! I am equipped in 10gbe and it barely turns at 65mo / sec ... in any case thank you for the answer

Caching question Hello and thank you in advance for your answers. I have just created a 12 bay raid and I am currently new to the 2 nvme of 250gb each I am at 6 bays I don't understand how the 2 caches work, moreover there is one, the first serves as a cache but the second is in a pool!!! I don't understand! but the most important thing is that I have 25to to move and as soon as the cache (is full knowing that in the media folder I have set the cache to yes!) once filled, it does not empty on its own! I waited 1 hour nothing!!! reboot nothing!!! The only way I found is to turn off the server and turn it back on! but is it possible to have a cache that empties over time (I come from the Synology world) for the moment with the same disk and nvme hardware, I have never had any blockages in my downloads from PC to Nas Or vice versa so like i said at the beginning thanks in advance