hilee

I know. I'm already checked 10.015.00 version support on 6.12.30 kernel on Github. But I don't understand why cannot support that driver on 6.12.24. And I don't know the Unraid when do support upgrade kernel. Actually I hoped in 7.1.4 do support it, but the kernel version still using 6.12.24 in 7.1.4...

Hello. Could you update rtl8126 driver version 10.015.00 base on Kernel 6.12.24-Unraid? I asked to Realtek lost ping problem, they said to me, RTL8126 should be use 10.015.00 driver version. But in the Github released 10.015.00 version only can use 6.12.30 kernel version. So please release 10.015.00 version by kernel 6.12.24. Thanks.

That URL link is for RTL815x USB ethernet. The USB ethernet driver version 2.20.1 is correct. The PCI-e ethernet driver version is 10.015.00. Is different version to USB.

Sounds great!! If when file tranfer over FUSE passthrough mode in Array, the speed similler like native connect? Actually I changed all my disk Array to Pool, and I made all HDD to raid 0. But I don't think this way is not recommand Unraid OS's.

I also have same problem... The rtl8126 driver in apps is old version.(Last version is 10.015.00. In apps version is 10.013.00) I want upgrade driver version but I don't know how can upgrade. How can upgrade new driver in Github(https://github.com/jinlife/unraid-r8125-r8152-driver)?

After all, it means that to use high performance through file transfer, I have to use a raid pool rather than an array.

That's sad news.. I just want 100MB/s average speed via SMB that's all..

Thank you reply. I tested file copy spped via FTP, when I used FTP, the transfor speed average 100MB/s and very stable(stable meam is not waving when file transfer). If when I change file system xfs to zfs, I can get better performance? My server spec like below. CPU : Intel i3-12100 RAM : DDR4 32GB

Hi. This is my iperf test result Unraid(iperf client) to PC(iperf server). ======================= Connecting to host 192.168.1.109, port 5201 [ 5] local 192.168.1.3 port 34750 connected to 192.168.1.109 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 110 MBytes 921 Mbits/sec 0 608 KBytes [ 5] 1.00-2.00 sec 105 MBytes 881 Mbits/sec 0 356 KBytes [ 5] 2.00-3.00 sec 104 MBytes 869 Mbits/sec 0 286 KBytes [ 5] 3.00-4.00 sec 106 MBytes 892 Mbits/sec 0 288 KBytes [ 5] 4.00-5.00 sec 105 MBytes 881 Mbits/sec 0 283 KBytes [ 5] 5.00-6.00 sec 106 MBytes 886 Mbits/sec 0 288 KBytes [ 5] 6.00-7.00 sec 104 MBytes 868 Mbits/sec 0 286 KBytes [ 5] 7.00-8.00 sec 106 MBytes 887 Mbits/sec 0 288 KBytes [ 5] 8.00-9.00 sec 106 MBytes 885 Mbits/sec 0 283 KBytes [ 5] 9.00-10.00 sec 106 MBytes 885 Mbits/sec 0 5.66 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.03 GBytes 886 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 1.03 GBytes 881 Mbits/sec receiver iperf Done. ========================= I think the network bandwidth and throughput is no problem. And I have question, is there any ways to use cache when some file copy Unraid to PC? In online, many documents just explain use cache when copy file PC(or another device) to Unraid.

My server also very slow speed by samba. When copy file Unraid to my PC, average max speed 70MB/s. This means is not average that speed, sometimes the speed down to 10MB/s. Past when I used native Ubuntu, average max speed 100MB/s. I cannot still figureout this problem. If the reason of speed slow is spec about Unraid, I should be re-think change my server os. Please advise to me.