skoj
Members
-
Joined
-
Last visited
Everything posted by skoj
-
Minor nitpick. You see the same green dot whether system is on or off. I'd expect it to be the red 'x' or at least something different when the system is off or in maintenance mode.
-
Pool created on rc1, working fine in rc2 and after upgrading to rc3 i get this upon array start: Reverted back to rc2 and the pool mounted without trouble. bender-diagnostics-20230414-1937.zip
-
Smart attributes are randomly filtered out for Seagate Nytro XF1230 SSDs. Cannot repro for any other make/model. Occurs on 6.11 & 6.12.-rc2. Every time I load the attributes I get a different subset: Reload and a different subset every time: Collecting the smart attributes directly always returns the full set: root@BENDER:~# smartctl -n standby -A /dev/sdk smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.20-Unraid] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46888 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 75 174 Unexpect_Power_Loss_Ct 0x0030 100 100 000 Old_age Offline - 68 175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 086 086 000 Old_age Always - 391775296 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 76 179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 538 180 End_to_End_Err_Detect 0x003b 100 100 006 Pre-fail Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 SSD_Health_Flags 0x0000 100 100 000 Old_age Offline - 0 190 SATA_Error_Ct 0x0000 100 100 000 Old_age Offline - 0 194 Temperature_Celsius 0x0002 070 049 000 Old_age Always - 30 (Min/Max 10/51) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 201 Read_Error_Rate 0x000e 100 100 000 Old_age Always - 0 204 Soft_ECC_Correction 0x000e 100 100 000 Old_age Always - 0 231 SSD_Life_Left_Perc 0x0033 086 086 001 Pre-fail Always - 86 234 Lifetime_Nand_Gb 0x0032 100 100 000 Old_age Always - 1530016 241 Total_Writes_GiB 0x0032 100 100 000 Old_age Always - 1457984 242 Total_Reads_GiB 0x0032 100 100 000 Old_age Always - 12827 245 Read_Error_Rate 0x0033 086 086 001 Pre-fail Always - 86 250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 2334 I suspect the bug's in this script which does some fairly complex filtering on the smartctl output: /usr/local/emhttp/plugins/dynamix/include/SmartInfo.php Not a huge thing but I'd appreciate it if one of the devs can take a look. bender-diagnostics-20230408-1503.zip
-
Just flashed my M1015 into a SAS2008 in IT mode using the instructions and ZIP file in this thread. Was pretty straightforward except that I had to try several motherboards until I found one that didn't give me the "Failed to initialize" error. Props to madburg for putting this together and to everyone that posted their experiences. It would have been a brutal process without this post! Not sure if anyone cares but I have CS2EE motherboard and I flashed to formware version P15 downloaded from LSI's support site. I'll test for a few days but things look good at first glance. No syslog errors, can read all drive temps and I can spin drives up/down from the web console.
-
Thanks, this turned out to be the problem. I never explicitly removed the failed disk from the array. I shutdown, unplugged the failed drive and restarted. The GUI led me to believe the drive was automatically removed from the array but it wasn't. I couldn't remove the drive from the array at this stage so I plugged the replacement drive into a different SATA port. That was enough for the preclear script to recognize it as a new disk and do its thing. The replacement drive is in the array now and all is well. Thanks everyone for the advice.
-
I'm having an odd problem. Running 5.0-rc3 & preclear 1.13. I had a drive red-ball, I've replaced the drive, it's showing as "not installed" in the unraid web gui. Next step is to preclear the new disk which I do by executing : /boot/preclear_disk.sh -A /dev/sdg I'm certain that sdg is the replacement disk (and I haven't added it to the array) but I get the following error: Sorry, /dev/sdg is already assigned as part of the unRAID array. Clearing will NOT be performed Any idea how to troubleshoot this problem?