Drider

Greetings! My first post, but I've been around the forums about two months now, gathering information, and learning. (Thank God for search buttons!) I've built my first unRAID box, thanks to my father, and I'm looking to add the HDD's I was previously using to store media files, (.iso's). The drives were never in a system, but always used in a Thermaltake BlacX Duet. Anyway, I'd like to use these drives, as I don't have much else at the moment, and I will plan to upgrade them eventually, just not sure exactly when. I'm not sure what all I need to attach but for now, here's the 4 preclear.sh reports: 4BXV1: ========================================================================1.14 == invoked as: ./preclear_disk.sh -A /dev/sdg == ST31500341AS 9VS4BXV1 == Disk /dev/sdg has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 5:05:15 (81 MB/s) == Last Cycle's Zeroing time : 4:21:02 (95 MB/s) == Last Cycle's Post Read Time : 10:24:25 (40 MB/s) == Last Cycle's Total Time : 19:51:44 == == Total Elapsed Time 19:51:44 == == Disk Start Temperature: 30C == == Current Disk Temperature: 31C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 116 117 6 ok 103695522 Seek_Error_Rate = 62 61 30 ok 1576598 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 84 91 0 ok 16 Airflow_Temperature_Cel = 69 70 45 near_thresh 31 Temperature_Celsius = 31 30 0 ok 31 Hardware_ECC_Recovered = 60 48 0 ok 103695522 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ BCJ7: ========================================================================1.14 == invoked as: ./preclear_disk.sh -A /dev/sdf == ST31500341AS 9VS4BCJ7 == Disk /dev/sdf has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 4:41:25 (88 MB/s) == Last Cycle's Zeroing time : 4:23:44 (94 MB/s) == Last Cycle's Post Read Time : 10:34:57 (39 MB/s) == Last Cycle's Total Time : 19:41:07 == == Total Elapsed Time 19:41:07 == == Disk Start Temperature: 33C == == Current Disk Temperature: 34C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Seek_Error_Rate = 70 69 30 ok 10659712 Spin_Retry_Count = 100 100 97 near_thresh 22 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 1 1 0 near_thresh 477 Airflow_Temperature_Cel = 66 67 45 In_the_past 34 Temperature_Celsius = 34 33 0 ok 34 Hardware_ECC_Recovered = 55 35 0 ok 30022470 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 43 sectors had been re-allocated before the start of the preclear. 43 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ 07CY: ========================================================================1.14 == invoked as: ./preclear_disk.sh -A /dev/sdi == ST31000340AS 5QJ107CY == Disk /dev/sdi has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 3:19:23 (83 MB/s) == Last Cycle's Zeroing time : 3:16:38 (84 MB/s) == Last Cycle's Post Read Time : 7:36:59 (36 MB/s) == Last Cycle's Total Time : 14:14:01 == == Total Elapsed Time 14:14:01 == == Disk Start Temperature: 30C == == Current Disk Temperature: 31C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdi /tmp/smart_finish_sdi ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 118 115 6 ok 192958221 Seek_Error_Rate = 51 51 30 near_thresh 253411065852 Spin_Retry_Count = 100 100 97 near_thresh 6 End-to-End_Error = 100 100 99 near_thresh 0 Airflow_Temperature_Cel = 69 70 45 In_the_past 31 Temperature_Celsius = 31 30 0 ok 31 Hardware_ECC_Recovered = 57 40 0 ok 192958221 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 2 sectors had been re-allocated before the start of the preclear. 2 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ 0843: ========================================================================1.14 == invoked as: ./preclear_disk.sh -A /dev/sdh == WDCWD1001FALS-00J7B1 WD-WMATV3090843 == Disk /dev/sdh has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 3:35:01 (77 MB/s) == Last Cycle's Zeroing time : 3:14:57 (85 MB/s) == Last Cycle's Post Read Time : 7:34:28 (36 MB/s) == Last Cycle's Total Time : 14:25:27 == == Total Elapsed Time 14:25:27 == == Disk Start Temperature: 34C == == Current Disk Temperature: 35C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdh /tmp/smart_finish_sdh ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 115 116 0 ok 35 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 1 sector had been re-allocated before the start of the preclear. 1 sector is re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ Thanks so much for all your help! -D