stinger303

I'm transcoding everything into h264. There's 5 video encoder options for h264. Is one better then the other? Which one would be the better one to use? Thanks

Hello, A few questions. does only one worker transcode one movie at a time? or can multiple workers transcode the same movie? What does everyone think of the output quality? How does it compare to say something like using handbrake? I just had it do one movie for me and it only reduced the file size by a couple of gigs. I'm having it transcode from MKV to MP4. Thanks

Thanks for everyone's help. I ran the memtest which took like 4 days to complete. It didn't come up with any errors. I ended up just pulling out all the ram and reseating them. I haven't had anymore machine errors since. Thanks

I'm running the memtest now. The bios log only said communication error it didn't say anything specific about ram.

Not for about 5 years since I put the server together. Should I run one? Sent from my LM-Q720 using Tapatalk

Hello, My log is getting alot of Machine Check Event errors. Not sure what the issue is. Here's my log. syslog.txt

For a while now Ive been getting an error message while trying to play trailers through plex. CONVERSION FAILED. THE TRANSCODER EXITED DUE TO AN ERROR. Any one else get this error? I would like to be able to play the trailers for the movies I have on plex. Thanks Sent from my LG-G710 using Tapatalk

Well I never got a response from Dell so I went ahead and used the steps from https://digitalcardboard.com/blog/2014/07/09/flashing-it-firmware-to-the-lsi-sas-9211-8i-hba-2014-efi-recipe/ I went ahead and used the 9207-8i IT firmware that Fireball3 posted and it looks like it worked. I didn't get any errors. After I flashed everything it's still showing it a 9217-8i but it's in IT Mode and not IR mode. I still need to put it in my server to verify everything boots up and works, which I'll do shortly but it's looking promising. Just want to give a big thanks to everyone in these forums for all the help you give everyone. Thanks Chris Sent from my LG-LS993 using Tapatalk

Thanks for the reply. I'll email Dell to see if they have any stock firmware for the 9217 and or ask if flashing the 9207 FW will work with the 9217. I'll update if and when I get an answer Dell. Thanks Sent from my LG-LS993 using Tapatalk

Hello, I just purchased a Dell SAS 9217-8i GTP9G PCI Express x8 6Gbps 8-port SAS/SATA RAID Card. Can anyone point to the correct firmware I need to flash this into IT Mode. I've tried to read up on it and I'm still not sure what firmware I need. The help is always appreciated. Thanks, Chris Sent from my LG-LS993 using Tapatalk

Hello, I'm hoping one of you have ran into this. I have trailer files for every movie I have. They sit inside the same folder as the regular movie but with a - trailer at the end of the file name. How would I stop radarr from thinking that the trailer file needs to be upgraded to a Bluray quality file? It's done this to me a few time so now I have 2 Jaws 1080p movie files instead of one movie file and a trailer file. I would rather not have to put the trailers in a separate folder as I have well over 1000 movies with trailers within the main movie folder. Thanks, Chris

Hello, I have tried this docker a few times before. One of the main reasons I haven't used it exclusively is that I continually get THE REQUEST TO RTORRENT HAS TIMED OUT message. The docker just gets real sluggish while I'm getting this message and it's almost unusable. Any one knows what causes this message? And what I can do to fix it if anything. I'm currently using the Delugevpn docker with no issues. I would really like to use this docker instead as I prefer it's layout and options over Delugevpn. Any help would be appreciated. Thanks, Chris Sent from my SM-N910P using Tapatalk

Great, I'll add that port. Thanks for the quick response. Sent from my SM-N910P using Tapatalk

Hello, I just ran the Fix Problems plugin and I getting the message below. Docker Application binhex-delugevpn, Container Port 58946 not found or changed on installed application Anyone know why I'm getting this message? I haven't changed anything since I started using DelugeVPN several months ago. The port in the docker say 58846 not 58946. I did change the port in the docker to 58946 just to see what it would do and I get the same message after I re-scan the Fix Problems plugin. Thanks

DNS is by default set to use Google DNS and FreeDNS, these can be changed by defining what you want to use via the value of the env variable key "NAME_SERVERS", so DNS leakage (as in it will only use the name servers you specify) is prevented via iptables. As for ip leakage (as in the tunnel goes down and it uses your internet connection), this is also fully covered, again by the usage of iptables. Great, Thanks for the explanation. Sent from my SM-N910P using Tapatalk

Hello, I have this setup with airvpn and its running great. My question is do we need to worry about dns leaks when using this docker? Also is there a way to set the dns servers that I want to use? How do I know or ensure that if the VPN goes down that the docker just won't use my unprotected Internet connection. Thanks Sent from my SM-N910P using Tapatalk

Did you remote desktop into mythtv and set it up first? I think I ran across this problem too when I did mine. When you remote in and set it up, it should be fine if I am remembering correction. You want to remote to: your ip:3389 if you used the default device mappings. Sorry for the late reply. This was the issue. Thanks for the help. I have another question. I'm trying to setup my video source setup. It doesn't seem like it retrieving any lineups when I enter my SD username and password. When I hit retrieve the progress bar gets to 50% then disappears. I'm behind a Pf-sense firewall so do I need to forward a certain port in order to download the guide info? Thanks,

Hello, I'm trying to install his docker. It looks like it installs OK but when I try to launch it I get this message. Not sure where I need to go from here. datetime: 2016-09-25 17:30:19 (MDT) errornum: 256 error type: User Error error string: !!NoTrans: MasterServerIP or MasterServerPort not found! You may need to check your mythweb.conf file or re-run mythtv-setup!! filename: /usr/share/mythtv/bindings/php/MythBackend.php error line: 42 Here is what is in the log for the docker. ** Running /etc/my_init.d/001-fix-the-time.sh... Current default time zone: 'America/Denver' Local time is now: Sun Sep 25 17:28:32 MDT 2016. Universal Time is now: Sun Sep 25 23:28:32 UTC 2016. *** Running /etc/my_init.d/002-fix-the-config-etc.sh... *** Running /etc/my_init.d/003-bring-up-the-database.sh... Creating database(s). Database(s) created. Starting MariaDB... Checking whether database(s) are ready waiting..... waiting..... Starting MariaDB... *** Running /etc/my_init.d/004-bring-up-rdp.sh... *** Running /etc/my_init.d/005-bring-up-the-backend.sh... Checking whether database(s) are ready *** Running /etc/my_init.d/006-bring-up-mythweb.sh...