indy5

So, I have been pouring over the forums and newegg for past several days and finally decided to post my dilemma. I want to migrate my unraid box over to a newer case and possibly new MB/CPU in the near future. I currently have the Cooler Master 590 with 3 Icy Dock 4-in-3s, maxed out with 12 drives. I have been looking at the Norco 4224 and even gone down the road of building a separate server box and externally connecting a Norco DS-24D enclosure. My issue is that the cabinet that I currently have my hardware in, is only about 19" deep. The 4224 is almost 26" deep and I feel it will stick way too far out the back. Are there any cases out there that fit my needs? I would like to have around 20-24 drive bays in a case that is 19-20" deep only. Any thoughts out there? I appreciate the help

Take the flash out of the server after shutting it down then run checkdisk on the flash drive using a windows computer. Put it back in the server and boot up. Just ran chkdsk and no errors were found. This is not the first time I've had this issue with the usb device becoming "disconnected" while in the running server. Is there something else I can check? Thanks

Ok, running 4.7 and I have noticed this problem a few other times, but I think it's time to address the issue. I can't seem to access my flash share remotely. Also, when in a telnet session, the /boot folder is showing no files. Before I do anything, I wanted to poll the community for assistance. My log file seems to show a ton of FAT errors. I appreciate any help syslog.txt

I have all of mine set up on different ports.

It can only handle one request at a time. While servicing a request, it is not listening for another. It is not a read web-server, it is an "awk" script pretending to be one. Do not be impatient. Any program can work without a cache drive. Joe L. I have been experiencing this problem as well. I would say 60% of the time is a better result than what I am seeing. The main unmenu page hardly comes up, let alone any of the other pages. It's been so bad, I wasn't sure unmenu was even running. Is there something in particular in the logs I should be looking for? I am also running Sab, Sick and Couch on the server, if that makes a difference. Thanks

Smart Report for the drive smartctl -a -d ata /dev/sda smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA3341503 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 17 11:49:57 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (35460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 172 171 021 Pre-fail Always - 6400 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 281 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1883 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 171 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 156 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6739 194 Temperature_Celsius 0x0022 117 080 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1809 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Well it seems all is well. The rebuild tree finished up last night and repaired a few things. Nothing was inside the lost+found folder, so I am guessing that all was recovered. I am going to keep a watchful eye on my server now. Is there anything else I should do regarding this drive, or just hope for the best?

That's what is running now. Any reason this may have happened? This is one of the 2tb EARS drives. I have been using unraid for years now with many many drive changes and upgrades. This is the first I have seen this type of problem.

Well, the --fix-fixable process is done. here are the results Will check consistency of the filesystem on /dev/md3 and will fix what can be fixed without --rebuild-tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --fix-fixable started at Thu Apr 14 13:19:49 2011 ########### Replaying journal: Done. Reiserfs journal '/dev/md3' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. \/ 3 (of 12|/ 26 (of 170|/ 93 (of 153/bad_stat_data: The objectid (22953) is shared by at least two files. Can be fixed with --rebuil d-tree only. / 6 (of 12// 73 (of 156//118 (of 170\bad_stat_data: The objectid (22952) is sh ared by at least two files. Can be fixed with --rebuild-tree only. / 9 (of 12-/ 43 (of 170\/137 (of 170|bad_stat_data: The objectid (22947) is sh ared by at least two files. Can be fixed with --rebuild-tree only. /123 (of 170\/107 (of 170-bad_stat_data: The objectid (22945) is shared by at le ast two files. Can be fixed with --rebuild-tree only. /125 (of 170// 50 (of 87\bad_stat_data: The objectid (22951) is shared by at le ast two files. Can be fixed with --rebuild-tree only. / 10 (of 12\/ 82 (of 170-/138 (of 170|bad_stat_data: The objectid (22944) is sh ared by at least two files. Can be fixed with --rebuild-tree only. /105 (of 170//139 (of 170|bad_stat_data: The objectid (22946) is shared by at le ast two files. Can be fixed with --rebuild-tree only. / 11 (of 12\/ 10 (of 86\/ 87 (of 170-bad_stat_data: The objectid (22943) is sh ared by at least two files. Can be fixed with --rebuild-tree only. / 12 (of 12\/ 47 (of 88// 85 (of 170-bad_stat_data: The objectid (22948) is sh ared by at least two files. Can be fixed with --rebuild-tree only. bad_stat_data: The objectid (22949) is shared by at least two files. Can be fixe d with --rebuild-tree only. / 86 (of 170\bad_stat_data: The objectid (22950) is shared by at least two files . Can be fixed with --rebuild-tree only. bad_stat_data: The objectid (22954) is shared by at least two files. Can be fixe d with --rebuild-tree only. bad_stat_data: The objectid (22955) is shared by at least two files. Can be fixe d with --rebuild-tree only. bad_stat_data: The objectid (22956) is shared by at least two files. Can be fixe d with --rebuild-tree only. finished Comparing bitmaps..vpf-10630: The on-disk and the correct bitmaps differs. Will be fixed later. Checking Semantic tree: finished No corruptions found There are on the filesystem: Leaves 282781 Internal nodes 1788 Directories 2415 Other files 22390 Data block pointers 284257445 (0 of them are zero) Safe links 0 ########### reiserfsck finished at Thu Apr 14 15:31:53 2011

Ok, the test is still running, but this already popped up: Should I stop this process and kick off the tree rebuild, or let it finish first? Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --fix-fixable started at Thu Apr 14 13:19:49 2011 ########### Replaying journal: Done. Reiserfs journal '/dev/md3' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. \/ 3 (of 12|/ 26 (of 170|/ 93 (of 153/bad_stat_data: The objectid (22953) is shared by at least two files. Can be fixed with --rebuil d-tree only. / 4 (of 12|/123 (of 168/

Ok, running --fix-fixable now. I will report back. Thanks!

I wanted to poll the forum before I do something stupid here. I just finished running the file system check and got some errors that suggest rebuilding the tree, which according to the docs, is a last resort option. The problem started when my server would freeze up, seemingly when the mover kicked into action. I am guessing that it was happening because the server was copying data up to a particular drive. This is why I decided to run the check against this particular drive. Anyway, I would greatly appreciate it if someone would take a look at my syslog and let me know what I should do. syslog-2011-04-14.zip

What's the recommended way of creating multiple databases? Do we just change the settings under the config box and put in the new information and reapply the install? It would be nice if you could add more config boxes to show all of your databases. I am trying to create a database for my xbmc music library, to go along with the video one. I can't seem to get this created, while I had no trouble with the first one.

Is there an easy way to mount a windows 7 share from within Unraid? I sometimes pull down things using SAB and these files ultimately do not reside on my unraid server. I will be using the categories option once I get the mount point set up. Is this something that can be done? Thanks

I know this, I was elaborating on what I have been seeing. In the details that I have posted, I was saying that the repair process actually DID function correctly, it just did not extract the archive once the repair was completed.

The behavior of this repair/unrar process is a bit strange. I have an example of a file that completed its download and I received a failure notification. I was then able to simply unrar the archive without having to repair it. Looking at the files in the directory, a repair already tool place (example, files such as part31.rar.1) Here's what SAB had to say in the history: Repair: [hoarders.s01e04.720p.hdtv.x264-momentum] Verified in 22 seconds, repair is required [hoarders.s01e04.720p.hdtv.x264-sample.mkv] Quick Check OK Unpack: No post-processing because of failed verification

Got it! Thanks, it was an outdated python package.

Hmm, python says 2.5.2 r252:60911 I just looked at the dependencies package that I installed and it's only version 1.3. I will try and update that now.

I downloaded the source tar file last night from Github. I basically extracted it onto my cache drive and tried running it from there. Is there something else that I need to do? It seems to have created the file structure. Permissions issue perhaps?

Here's what I get when I try to run it that way: root@venice:/mnt/cache/.custom/CouchPotato# python /mnt/cache/.custom/CouchPotat o/CouchPotato.py -d /mnt/cache/.custom/CouchPotato/app/config/configApp.py:114: Warning: 'with' will become a reserved keyword in Python 2.6 Traceback (most recent call last): File "/mnt/cache/.custom/CouchPotato/CouchPotato.py", line 37, in <module> from app.config.configApp import configApp File "/mnt/cache/.custom/CouchPotato/app/config/configApp.py", line 114 with open(self.file, 'wb') as configfile: ^ SyntaxError: invalid syntax

Point taken... It has worked fairly well for me under Windows, so I was just hoping to move all of my automation over to the Unraid server.

Has anyone had luck getting CP to run successfully on Unraid? I tried following the instructions on the first page of this post and I continue to get an error: root@venice:/mnt/cache/.custom/CouchPotato# nohup: ignoring input and appending output to `nohup.out' It seems to hang and never creates the config file. Any thoughts? Thanks

After reading this, I thought I would try it myself. If I write to \\tower\movies (using cache) I get 18-20MB/s. If I write the same file to \\tower\cache\movies, I get 55-60MB/s. I realize I had backups of 4.4.2 on my flash drive, so I renamed the files and rebooted. I get 46-50 MB/s to \\tower\movies and 55-60 MB/s to \\tower\cache\movies. So, something has definitely changed. What did you have backup files of? I have been having some very slow copy speeds to cache (15-20 MB/sec). I don't believe I have any old unraid files on my flash drive.