sch1308

I migrated to a new motherboard that I took out of an old desktop and now my server UI is extremely slow or hangs on every page except the main dashboard. The community apps page, for example, stays stuck at "updating content" with the loading animation. I am also getting a plex transcode error but not sure if that is related. I am using a tp link access point with a 100mbps ethernet port built in since my server is not in the same room as my router linked here. I have my server assigned a static IP in my router settings but not in the Unraid GUI network page. jarvis-diagnostics-20211228-2201.zip

I have my usenet download folder on a separate hard drive and only have the appdata folder on my SSD so I'm not sure if the SSD is being hit with to many writes at one time? I'm getting errors on my log as well. Is it something with my servers SATA backplane that isn't playing nice with my SSD? jarvis-diagnostics-20201114-1723.zip

Here is the pdf of the ebay listing with part numbers, I ran it for about 130 days uptime before shutting it down to install a new drive. I can try to install the 6.9 beta and see if that helps. Is IOMMU something I need? I'm not familiar with it. I believe I was on version 6.7.3 since it was the last version that was stable for me. eBay listing (3).pdf

jarvis-diagnostics-20201017-2128.zip

Here is my syslog, I upgraded from 6.6.7 to 6.8.3 and now my server becomes unresponsive after 15 minutes and my dockers timeout from a web browser (plex, sonarr, radarr, etc.) syslog

it was not, i moved it to my desktop and moved it into the movies share again and it worked fine. I believe it was because I had the minimum free space in movies share to 20gb when the file was 40gb and the drive it tried to send it to was full.

both are set to 0

@spazmc

I'm getting this error when trying to copy a file into my Movies share, the share itself has 2tb free and is set to not use cache drive. jarvis-diagnostics-20200413-2105.zip

this solved my problem, thanks!

my server starts up fine on version 6.7.2 but when i plug in an ssd to set up as a cache drive the UI freezes and I get messages in the log. Any suggestions? jarvis-diagnostics-20190914-1226.zip

my plex database corrupts at least once a week. running 6.7.2 tower-diagnostics-20190626-2323.zip

I have the following server I bought from ebay but it is showing it's age (I stream 5-10 clients on my plex). Is there a mobo and cpu combo that will still work with the sata cards? I can't find any compatibility info online. I have 20 drives so I need both sata cards. Case: Supermicro SC846TQ-R900 Motherboard: Supermicro H8DME-2 CPUs: AMD Opteron 2419 SATA cards: Supermicro AOC-SAT2-MV8 USB3 card: Highpoint RocketU 1144C Supermicro AOC-SIM1U remote management card

Im getting the following error when i start up letsencrypt. nextcloud config.php

ran the troubleshooting mode on fix common problems and attached them. ill disconnect all three sata cards and see it if will boot with just the 6 onboard drives. unraid-diagnostics-20180421-1845.zipFCPsyslog_tail.txt

would the h310's from dell be compatible with my motherboard or should I be looking for a new mobo/cpu/ram combo upgrade? Also I'll try to downgrade to 6.4 and see if that helps. Thanks for the tips.

Here is the ebay listing for the box, according to the seller it has sat2-mv8 cards in it. Funny because it's worked fine for a year up until yesterday. eBay listing.pdf

I'm getting an "exited with preempt_count 1" error on my ipmi card. it will boot to the dashboard if I have it to not mount array on startup but as soon as I select to start the array I get the message. I am using an ssd for a cache drive. thanks.

My plex seems to be on a loop and never loads the webui, I have included diagnostics for unraid and the logs from plex. unraid-diagnostics-20180222-1809.zip Plex Media Server.log

I've been getting a "503 service unavailable" on my unraid plex server running the linuxserver docker after a few hours. I have included my pastebin log. https://pastebin.com/7uQsiuA7 unraid 6.3.5 and plex version 1.9.6.4385 Plex Media Server Logs_2017-10-31_03-28-18.zip

chdir failed: root and webGui login account ftpuser is spammed in my logs, I have stopped all dockers and the message still appears every 60 seconds filling my log in a few days time. Is it a rogue plugin? Im using proftpd for my ftp server. Thanks. unraid-diagnostics-20170503-1820.zip

wd 4tb reds are 96 on wd education store.

sorry just checked this lol. i have it checking my imdb watchlist which is at 5,700 movies.

i bought one off ebay, its a supermicro case with a dual socket amd motherboard with 24 bays.

pretty great compared to couchpotato, it found pretty much everything I had and im now upgrading my older ones to blurays. im on the develop branch because nightly's were messing up my database. let me know if you have questions about it.