waltzin

I Think the link in the opening post is wrong. I tried the docker hub link in my docker settings and that worked. I ended up updating Piwigo through the Piwigo gui settings and it seems to have worked. I'm now on 2.10 with the new features. Not sure if this is the correct way to do it with docker though.

Thanks saarg. It's still showing 404 error, do you know who I would advise to get fixed?

I'm having the same issue as Major Tom, my Piwigo is still showing 2.9.5 with the latest update and I'm not getting the new features that 2.10 is supposed to have. I tried changing to the latest tag but doesn't seem to have done anything(not sure if I did it correctly) Also, the Dockerhub page is giving a 404 error atm.

Thanks for this, worked well for me. Went from 19MB/s zeroing for my 8TB to 197MB/s zeroing after downgrading. Even resumed from where I left off :)

Sorry, didn't think I did. It did pop up with an error message mid typing though so was probably this. I will check power source/power supply next, thanks.

Some extra info if needed: My system: 6x Seagate archive drives (parity and storage) 1x 2.5" 500gb drive (used with unassigned drives) LSI 9211-8i SAS SATA card Motherboard: Asrock B75M-ITX CPU: Intel i5-3470 CPU 3.2GHz Case: silverstone DS380 PSU: Silverstone 450 watt

Hello, I've been using Unraid for a couple years now but only in the last few months have I started playing around with dockers. Everything had been working great until about a week ago I tried to install my first cache drive(240gig ssd) and everything went badly. I had errors on the dockers, and the system started rebooting randomly and very frequently - sometimes every 5-10 mins. I got worried so I removed the SSD/cache form the array and and unplugged the cables from the SSD and basically set it up how it was working before. The system seemed much better however now I am still getting random reboots every 4-24hrs. What I have tried since: - Have run a parity check - finished in 18hrs(this is normal) and found zero errors. - reinstalled docker img - upgraded from 6.3.5 to 6.5.0 - re-seated all sata cables - I have grafana installed and confirmed no high usage for cpu, and dockers around the time of unclean shutdowns. No high hdd temps either. I've run fix common problems troubleshooting and attached syslog and diagnostics. The time stamp on the diagnostic is 03:20 and this would have been just before the unclean shutdown which I estimate to have happened between 03:20 and 03:27. Any one have any ideas what may be causing the unclean shutdowns? FCPsyslog_tail.txt tower-diagnostics-20180325-0320.zip

Hello, I've been using Unraid for a couple years now but only in the last few months have I started playing around with dockers. Everything had been working great until about a week ago I tried to install my first cache drive(240gig ssd) and everything went badly. I had errors on the dockers, and the system started rebooting randomly and very frequently - sometimes every 5-10 mins. I got worried so I removed the SSD/cache form the array and and unplugged the cables from the SSD and basically set it up how it was working before. The system seemed much better however now I am still getting random reboots every 4-24hrs. What I have tried since: -Have run a parity check - finished in 18hrs(this is normal) and found zero errors.

Hi, your link to script doesn't work anymore. Do you still have the script that you can share thanks?