leeknight1981

Members
  • Posts

    139
  • Joined

  • Last visited

Everything posted by leeknight1981

  1. As the title says iv clicked upgrade and I get UNRAID boot device not found, press ENTER to reboot. I updated plugins, docker and took a flash backup So what can the issue be as I can’t get in for logs. regards lee
  2. The Notification is that green one time and date stamped. My server was running All Ok on the previous version. I realised there was an issue when I tried to clear that Notification as I had to click on the tab to reload and that’s when it locked up! So I’m not sure as you say it’s Not Possible for my server to Notify Me yet there it is Notifying me it’s done it and I need to reboot but before I even rebooted the logs was full of the error and GUI locked up. I’m not saying it’s your plug-in but it’s also Not my server / hardware as it’s been working faultlessly until I had that green Notification of Updated Version which os exactly what broke it last time in Exactly the same way.
  3. no it loads into unraid normal not GUI mode. i do have a tab open on my imac during the day thats when i noticed the GUI locked up i clicked close on notification and it wouldnt Go so clicked main and it just sat there with three wavy lines.
  4. If you don't want the output of a cron job mailed to you, you have to direct # any output to /dev/null. We'll do this here since these jobs should run # properly on a newly installed system. If a script fails, run-parts will # mail a notice to root. # # Run the hourly, daily, weekly, and monthly cron jobs. # Jobs that need different timing may be entered into the crontab as before, # but most really don't need greater granularity than this. If the exact # times of the hourly, daily, weekly, and monthly cron jobs do not suit your # needs, feel free to adjust them. # # Run hourly cron jobs at 47 minutes after the hour: 47 * * * * /usr/bin/run-parts /etc/cron.hourly 1> /dev/null # # Run daily cron jobs at 4:40 every day: 40 4 * * * /usr/bin/run-parts /etc/cron.daily 1> /dev/null # # Run weekly cron jobs at 4:30 on the first day of the week: 30 4 * * 0 /usr/bin/run-parts /etc/cron.weekly 1> /dev/null # # Run monthly cron jobs at 4:20 on the first day of the month: 20 4 1 * * /usr/bin/run-parts /etc/cron.monthly 1> /dev/null 0 2 28 * * /usr/local/emhttp/plugins/ca.backup2/scripts/backup.php &>/dev/null 2>&1 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Read /var/spool/cron/crontab.C8zSyX, 23 lines, 1125 chars 1,1 Command root@R720XD:~# cat /boot/config/plugins/nvidia-driver/settings.cfg first_installation=false driver_version=460.80 local_version=460.80 disable_xconfig=false update_check=false root@R720XD:~# Can you be a little more precise please? What was forced? Yes my server locked up and shows that error in the logs and the update notification before i restarted and it showed the newest as installled as if it was installed without reboot
  5. Will have to do all that after work! Basically servers been running fine all week! This morning the GUI had locked up and that notification was on the screen. Auto Plug-in update is off yet that says Found and downloaded which caused that normal error in the logs. Just to clarify the servers been working the GPU has been working and transcoding all week NO issue not one then This morning my sever locked up and that update was installed that broke it. regards lee
  6. Nope nothing has changed Nothing at all, my sever GUI locked up and I had a notification of the update. I’m running the 1st one and it’s working fine so it’s Not my server or GPU. servers running ok not locking up no fault in logs snd it’s transcoding fine so I don’t know but v470.42.01 worked absolutely fine until today when it updated and then locked up GUI and the fault in logs. Now running 460.80 and again running fine no issues so if it was my server / gpu why was it ok on 470.42.01 and 460.80. I don’t want it auto updating I turned auto update off yet it’s being forced like this morning
  7. OK so my server locked up at 09:56 today 04.08.21 when i went on it said New NVidia UpDate v470.57.02 found and downloaded please reboot your server even though Auto Update is off. So it crashed my GUI and i had that same error in loggs. I Rebooted using the one that was working v470.42.01 and its working fine! So the latest one breaks my UnRaid so i am back on v470.42.01 and all is Working...
  8. No mate nothing i simpley waited to see that the plugin had been updated, i installed it and all works ok :)
  9. Well I was told it was My server, Hardware or GPU yet the Plug-in was updated 30.07.21 and now everything’s working, So it appears it was the plug-in and Not my Hardware. I am great full for the work the Guy’s do but I did say the card and everything was tested and working.
  10. No worries i put it to the one prior to the update, rebooted all was ok then as soon as i Enable docker No - Enable docker Yes i get the error so its not my card or server So i guess its wait and see
  11. Im having an identical Problem and am being advised its my card that works in other machine's and shows up in My UnRaid then disappears. If you find a fix please let me know :))
  12. The mining machine is mining and I don’t think the card in that will fit in my R720XD just seems odd when I install the plugin it’s all ok card is there as soon as I disable and enable docker it instantly says No Devices Found in the plug-in and I get the NVRM: GPU 0000:42:00.0 RmInitAdapter failed so I’m convinced it’s not my hardware as it all works and did work fine until after that update I give up tbh I’ll wait till it’s fixed I guess and say wasn’t my server / GPU as I’m Not the only person with the issue :-/
  13. Yes we installed UnRaid on the Gaming Machine, Yes the Card showed up and yes it showed in the Plugin... but nothing on that machine to test as was just set up to see if the card was visible etc as its not my machine Not saying there is a problem was showing what was in the logs after i removed it Id just like to get to the bottom of this as someone else is having the same issue i think. All was working Fine then an Update then its stopped working. Iv tested the card it outputs and games Fine... It shows up in a Fresh UnRaid - Plugin. I put the card back in mine its fine it shows install the plugin disable/reenable docker then i get the fault and whats in the logs the same as the chap above
  14. removed Plugin Jul 1 22:30:44 R720XD emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin remove nvidia-driver.plg Jul 1 22:30:44 R720XD root: plugin: running: anonymous Jul 1 22:31:01 R720XD kernel: docker0: port 1(veth049e849) entered disabled state Jul 1 22:31:01 R720XD kernel: veth6194793: renamed from eth0 Jul 1 22:31:01 R720XD avahi-daemon[12225]: Interface veth049e849.IPv6 no longer relevant for mDNS. Jul 1 22:31:01 R720XD avahi-daemon[12225]: Leaving mDNS multicast group on interface veth049e849.IPv6 with address fe80::5468:5dff:fe57:d2c7. Jul 1 22:31:01 R720XD kernel: docker0: port 1(veth049e849) entered disabled state Jul 1 22:31:01 R720XD kernel: device veth049e849 left promiscuous mode Jul 1 22:31:01 R720XD kernel: docker0: port 1(veth049e849) entered disabled state Jul 1 22:31:01 R720XD avahi-daemon[12225]: Withdrawing address record for fe80::5468:5dff:fe57:d2c7 on veth049e849.
  15. Guess Who's back... OK GPU Works in a gaming machine flat out, It also works in UnRaid IE Shows UP and in the plugin. So i put it back in my server, work's fine! Then i install the Plugin Card Shows up, Ver No, GUID Etc. Then i Re Enabled docker And Boom that same fault in logs Web - GUI locks up and freezes :( So Deffo Not the GPU or Server as it only happens when i install Plugin and or Re Enable Docker. More than Happy to assist with this via teams or what ever :) Logs below in order of time. Before shut down, Re boot, Install plugin, re enable docker etc :) r720xd-diagnostics-20210701-2212.zip r720xd-diagnostics-20210701-2208.zip r720xd-diagnostics-20210701-2201.zip r720xd-diagnostics-20210701-2157.zip
  16. This is what mines doing Also! ill let you know in another one :)
  17. I know mate i'm at a los we will try a fresh UnRaid and slap the GPU in, And see what happens ill come back to you with the findings
  18. Not really No and I don’t have a spare USB now I’m not at home and this is my mates gaming machine, So I’ll have to leave the card here and he will set UnRaid up when he has 5 mins but I’m 99.6% certain it’s not my hardware / server at fault 😜 I’ll come back to you maybe a Day or Two
  19. Ok GPU is working and have been smashing games on it for 2 hours no sweat, So deffo Not the Graphics Card :-/
  20. OK ill have to set up UnRaid on the tower as the R710 and supermicro servers wont take a GPU! i'm working till 1800 UK Time so ill have a play tonight... Its just strange that its stopped working 1 hour after that update ;(
  21. i put it in the machine and installed windows 10 on it and installed the drivers and the card showed up all ok and worked on external display, GUI if i click say Plugin's or Stats tabs i get the 3 wavy orange lines and it does nothing, totally standard unraid i don't play about with it, nvidia-smi: command not found, Honestly it has been working perfectly fine till that nvidia driver update Emby has worked and the card has transcoded everything correctly. On the 22nd about 10am UK time i went onto unraid and the GUI was weird and laggy and like locked up so i rebooted and was the same. So i removed the nvidia plugin and rebooted and its ok. Re install it i get that error. I cant get another card atm as non in stock and well overpriced as they all being brought to mine. This has been happily working Fine for well over 12 months till that update on 22nd
  22. Sorry the Nvidia Driver updated 22nd June according to telegram, Yes the GUI does lockup so i had to MC in and remove the Nvidia plugin and now it does not lock up and no Error in the logs. When i re install the plugin i get this - R720XD kernel: NVRM: GPU 0000:42:00.0: RmInitAdapter failed! and the GUI locks up. Card Works iv tested it in my mining machine. yes i tried latest and the option below that.
  23. Its all been working 100% OK No Issues till the NVIDIA Plugin UpDated, transcoding was fine also multiple streams. Its in a Dell R720XD Server with 2 1100w PSU's, Card works fine I don't believe this to be a hardware fault at all.
  24. 100% its the nvidia plugin as i removed it my GUI doesn't lock up and NO Errors, Re install the plugin and it fails with the same error in the log's r720xd-diagnostics-20210623-1209.zip
  25. Anyone have a Quick look into this for me please? My Emby GPU has stopped working and i cant understand why - kernel: NVRM: GPU 0000:42:00.0: RmInitAdapter failed! I have attached logs, I have removed the plugin and restarted the server and re added the plugin and re started and disabled the docker servoce and re started etc but i cant understand Nothings been touched or changed and the servers never moved Cheers Lee r720xd-diagnostics-20210622-1052.zip