puddleglum

Same error in FF, Chrome, Edge Ummm...it's Squeeze Ctrl

Tried restarting the docker itself, same error. Tried restarting the server, same error. In the client, when you're selecting which LMS server to connect to...that shows the character string

Just installed, tried to access settings: 403 Forbidden: settings/index.html Everything else appears to be fine...well, is there a way to edit the server name so it doesn't just show a string of randomly generated characters? Currently my "server" is 5c98e85133cf

Before I switched to win on bare metal, I was using only one gpu for gaming on unraid. I didn't have to put anything in grub. Just boot up the machine and it displayed the host machine. go to the web interface, launch a vm, and the vm would take over the display. worked like a charm.

I switched to a full install of Win-bare metal because games ran like a dog in the VM. Does the "fix" here https://lists.linuxfoundation.org/pipermail/iommu/2017-October/024823.html REALLY address the gpu issue? Are there pre and post benchmarks anywhere?

@kizer That was it. Sorry (for my idiocy) and thanks (for your chill comment)! Sweet! Now, I can have my recorded television shows not take up ~6GB/hr and get it whittled down to about 1.5.

I'm not getting any auto conversion from /watch. I checked /watch, and it does indeed match the share on the server. There were pre-populated videos in there. Nothing ever "kicked off" I copied a file from the share to my desktop, copied it back over, and still nothing. Suggestions?

Same error for me.

ASrock AB350 Fatal1ty Ryzen 1700x Radeon 480 8GB GSkill DDR4 32GB (3200 RAM, but can't get the board to work passed anything but 2133) Just set up a VM of Win10 last night then kicked off a bunch of games to DL. Haven't got to play them yet, but the OS is behaving fine. Everything seems to be dandy. I specifically went with the B350 board because I have no need for crossfire AND there were no X370 boards in stock. I just ordered a PCIE SATA card to offset the fewer ports. In my particular board, utilizing the M.2 port disables one of the SATA ports, and utilizing the M.2 ultra port disables one of the PCIE lanes. Not using a crossfire configuration, I can't see why there would be an issue running multiple vid cards.

Still nothing.

The server never automagically appeared. As soon as I remove it and install the official unraid one, it's there. Any other thoughts? I'd really like to use the DVR features. Wherever your appdata is stored. Ah, gotcha. Any other thoughts I might try when I get home? As I mentioned, I deleted the appdata dir (no biggie, my server isn't terribly populated at the moment) and recreated from scratch. Also, tried removing the docker and recreating with a capital Plex, so it wouldn't touch anything in the previously failed dir. No, I've already told you my thoughts... Try that first, then if that doesn't work, we can think again, but I don't have any other ideas tbh. Having said that, a screenshot of the docker setup might be helpful just to make sure you've got it configured appropriately. Didn't work. Still unavailable. I just had the same issue after I upgraded regular Plex to Plex Pass. I went into the web GUI and had to sign in, and it didn't find my local server. I logged out and back in without doing anything else, and it showed up. Not sure if you tried doing just that without anything else, but it might be worth a shot. I've tried logging out, removing the docker, deleting the dir from appdata, reinstalling/logging back in, etc. Just about every combination I can think of in order for plex to think it's "fresh". Odd. Maybe I just have to play the waiting game on this one? Hmph. The version string is in thre, i just blurred it out.

My ini has "serverpassword=foo". I wouldn't use the register stuff. Just tell your friends to click "add server", and enter your fqdn, and the right port number. When they connect, it will prompt them for the password. If it doesn't then something's wrong with your port forwarding. Make sure you have it set up properly for your container in addition to your router. 'sall good. The error was router-side. I didn't have everything set up properly...now I do, and your docker works like a champ. Thank you.

Wherever your appdata is stored. Ah, gotcha. Any other thoughts I might try when I get home? As I mentioned, I deleted the appdata dir (no biggie, my server isn't terribly populated at the moment) and recreated from scratch. Also, tried removing the docker and recreating with a capital Plex, so it wouldn't touch anything in the previously failed dir. No, I've already told you my thoughts... Try that first, then if that doesn't work, we can think again, but I don't have any other ideas tbh. Having said that, a screenshot of the docker setup might be helpful just to make sure you've got it configured appropriately. Didn't work. Still unavailable. I just had the same issue after I upgraded regular Plex to Plex Pass. I went into the web GUI and had to sign in, and it didn't find my local server. I logged out and back in without doing anything else, and it showed up. Not sure if you tried doing just that without anything else, but it might be worth a shot. I've tried logging out, removing the docker, deleting the dir from appdata, reinstalling/logging back in, etc. Just about every combination I can think of in order for plex to think it's "fresh". Odd. Maybe I just have to play the waiting game on this one? Hmph. The version string is in thre, i just blurred it out.

Wherever your appdata is stored. Ah, gotcha. Any other thoughts I might try when I get home? As I mentioned, I deleted the appdata dir (no biggie, my server isn't terribly populated at the moment) and recreated from scratch. Also, tried removing the docker and recreating with a capital Plex, so it wouldn't touch anything in the previously failed dir.

I'm at work so can't check the box right now, however, I have no cache drive installed. Would that file be some other place?

been wanting to try the dvr features so i uninstalled unraid's official and gave this one a shot. everything seems to install fine, but when going to web interface, it will not see itself as a server. my friends servers are there, my cloud sync is there, but no local server. i've removed the docker and reinstalled, changed the appdata dir, deleted the docker .img file and recreated, retried the whole shebang from scratch and nada. every time, same story, no local server.

How do I allow external connections? I've set up my router to forward the default port to the server. I have edited the .ini file with the following #registerName=Mumble Server registerPassword=somegenericpassword #registerUrl=http://mumble.sourceforge.net/ registerHostname=thehostnameofmyserver When someone externally tries to connect, they put the fqdn in address field: hostname.mydomain.com and the default port, and a generic username They can't connect externally. I can connect internally. What do I need to do to allow anyone I provide the info to, to connect to my server?

Thanks. The log still shows the same, but mythweb mysteriously populated data! Don't know how it works, bug glad it does. Now, let's see how the first recording turns out

I kept getting that as well. Try clicking on the dropdown and select a few of the other logins, they should error out, but form some reason after I did that a couple of times, went back to the original login and entered the creds, it loaded properly.

Maybe give it a day or so? Things might kick in? Because according to mythweb, the backend us up, awaiting...assuming I have all my pathings correct...mythfill should run at its "scheduled" time...which time is typically late in the evening.Even if I try to force it through RDP it still says can't connnect...soooo....hmmmm. The other option is TVHEADEND...but it can't even see my two HDHomeRun tuners.

Do you have to RDP into the docker in order to kick off mythfilldatabase? If so, once doing so, is it a manual process to keep it up to date?

Walked through the guide and everything seemed to go smoothly. Clicked "no" to both instances of start the backend and run mythfilldatabase. Exited the RDP session, restarted the docker and all my log shows is this Creating database(s). Database(s) created. Starting MariaDB... Checking whether database(s) are ready waiting..... waiting..... Starting MariaDB... Checking whether database(s) are ready icon for kill switch is set default config file(s) appear to be in place .Xauthority file appears to in place kill switch is set setup desktop icon is set mythtv folders appear to be set Database(s) exists. Starting MariaDB... Checking whether database(s) are ready waiting..... waiting..... icon for kill switch is set default config file(s) appear to be in place .Xauthority file appears to in place kill switch is set setup desktop icon is set mythtv folders appear to be set Database(s) exists. Starting MariaDB... Checking whether database(s) are ready waiting..... waiting..... waiting..... I am able to hostname:6760, and mythweb shows up, is navigable...but there's no data. Apparently because mythfilldatabase hasn't run....because it's....."waiting"? /home/mythtv = /mnt/cache/ /db = /mnd/cache /var/lib/mythtv = /mnt/user/RecordedTV/