ich777

Thank you for the information! Did you upgrade your entire hardware including the USB Boot device?

No, it exists.

Bootest du Unraid im UEFI oder Legacy Modus? Versuch Legacy modus und die VM OVMF TPM und als Maschinentyp Q3x (neueste).

I would recommend that you create a Github issue like described here: They are pretty quick answering and helping, maybe also include the docker run command output from your container. I'm only the template maintainer, if there is something wrong with the template I will fix it instantly...

Kommt erst mit Unraid 6.11 wenn du Kernel 5.17.x meinst oder was auch immer dann Main Stable ist. Die 6.10 bleibt auf dem LTS Kernel 5.15

This is maybe possible but it can also cause other issues like the previews and face recognition won't work like it should - at least these are things I think will/can cause trouble.

You can also install a second instance from the container but you have to change every single path in the second container, give it another name and also change the ports. Then you won't loose anything.

Please try to create a variable like this: and please report back if it is working for you after you did that. But I would first recommend to remove the container and the directory that was created for PhotoPrism in your appdata folder, pull a fresh copy from the CA App and add the Variable to the template before starting the container for the first time. When it does work I will update the template instantly.

Das geht dann vermutlich erst mit der nächsten RC, die sollte aber bald erscheinen. HW Transcoding wird mit der RC4 oder der nächsten RC aber trotzdem noch nicht funktionieren wenn du das versuchen willst. EDIT: Oh sorry hätte geglaubt das ist ein anderer Chip verbaut... Poste evtl. mal deine Diagnostics.

Do the following: Stop the container Got to the jdownloader2 folder in your appdata directory Delete the files "jdownloader2.jar" Delete the file "core.jar" Delete the "folder" tmp Delete the "update" folder Start the container again

This is not a supported CPU from what I know since only CPUs without an extension are supported (in your case G) and you iGPU is a Intel® UHD Graphics P630 wich is a slightly cut down version from the Intel® UHD Graphics 630. You can't find much information if Intel simply doesn't want support them or if they aren't capable in hardware to support GVT-g

I have to look into it if I can get a board like yours and test it myself why it fails. Have to look into it what they cost over here.

No, that‘s not entirely true, you have a low power chip where it is something entirely different where GUC and HUC needs to be enabled for the iGPU to fully work.

Don‘t do that, this is not like on Windows, each driver version has to be compiled for the appropriate Kernel version.

No, that is not possible…

Can you pleas give me the output from: ls /lib/firmware/i915 when you are on 6.10.0-rc4?

I think so, if that path exists…

The path to the game files inside the container is: /serverdata/serverfiles You can also see this here in the Dockerfile on line 13 and the README.md also says this at the SERVER_DIR variable: Click

Can you give me a little bit more insight how you installed the mods or how to install mods for Barotrauma in general? EDIT: I've pushed an update to the Barotrauma container since it won't start if you install it from scratch, this is now fixed. Maybe now the mods will work too? Please update the container.

Du musst nur auf Tools -> Update OS -> vom drop down wählst du next -> klicks auf Check for Updates -> installierst das Update und dann rebootest, das wäre der Update prozess. Das andere ist auch keine Hexerei mehr.

Das ist zu vernachlässigen und stört die Funktion des Containers nicht. Das ist ein typisches verhalten von TV Karten, hast du denn im Plugin nachgesehen ob die Karte erkannt wird? Normalerweise hilft ein komplettes trennen des Stroms vom Server (Stecker ziehen), die Ein-/Aus Taste und den Reset button ein paar mal drücken, 30 Sekunden warten und danach wieder einschalten. Läuft der Container denn? Auf welche IP verbindest du dich denn? Hast du deinem Server eine statische IP zugewiesen oder ist es eine dynamische? Das Log passt und es steht auch das sich TVHeadend verbindet (drittletzte Zeile).

I will look into it... but... The same here too...

@willis change the repo to: ich777/jellyfin:stable-rc But keep in mind once you are there you can't go back to 10.7.7 because the Database is migrated to the new version.

I would also recommend to enable GUC/HUC on your CPU by adding this to your syslinux.conf: i915.enable_guc=3

Please try to connect a monitor to the iGPU before turning on the server and see if it solves the issue.