kaine1688
Members-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by kaine1688
-
Updated recently and got the following error: Your data directory is invalid. Ensure there is a file called ".ocdata" in the root of the data directory. Your data directory is not writable. Permissions can usually be fixed by giving the web server write access to the root directory. See https://docs.nextcloud.com/server/27/go.php?to=admin-dir_permissions. How do I fix this?
-
Noticed today when i try to access my nextcloud that something was wrong, it generated a 1.3TB error message on my cache drive. 3987e7d2562f.7zAnyways i deleted the error file and started docker back up and it generated a new error file. Can someone look at this and help? I have a okay backup from 2 days ago that was still working, the backup file wasn't enormous. Can you restore a single docker form the CA Backup/Restore? or better yet if anyone can figure out what happened would be great. The database is only used for NextCloud and PhotoPrism. syslog-192.168.1.13.log
-
unRaid becomes unresponsive and requires reboot
kaine1688 replied to kaine1688's topic in General Support
Sounds good, both servers are on 6.11.5, swapped them both. Will circle back if i see similar happens again. Thanks Thought maybe after stuffing 10gig nics in both server something was wrong with them, but then again i did only see this issue after i upgraded from 6.8 -
unRaid becomes unresponsive and requires reboot
kaine1688 replied to kaine1688's topic in General Support
It happened again yesterday but i just IPMI reset the server, and same thing today. syslog-192.168.1.12.log It seems to happen when i am streaming plex, pause and walk away for extended periods of time, with whatever i am watching paused. Or atleast it seems. The GUI becomes unresponsive and i am unable to SSH into the server. -
unRaid becomes unresponsive and requires reboot
kaine1688 replied to kaine1688's topic in General Support
Ya i saw my mistake :X enabled it now and its working -
unwejaton-diagnostics-20230108-0848.zipCan anyone look through the log and figure out why the server is becoming unresponsive, this has happened 2 times already this week? I am not sure what is happening. This server has a ZFS pool. When it hangs i can not SSH into server or anything, it just completely locks up. Only a reboot solves the issue. I think CA backup is causing it, lastnights backup is only 11GB vs usual 360GB. So i have the backup pointed to a ZFS share, is that bad? i only have a 512GB SSD in array since i mainly use this server as nextcloud/steam library/game servers on the ZFS pool. I could chuck a spinner in the array and just use it as the backup drive.......
-
[Support] Linuxserver.io - Nextcloud
kaine1688 replied to linuxserver.io's topic in Docker Containers
Hi, I recently set up the container using SpaceInvaderOnes youtoube vod, with cloudflare ddns + swag. Everything is working great, heres the question. If i wanted to switch from swag to just using a cloudflare tunnel, is there something special that needs to be done? i tried switching and it makes the docker unnacessible from outside the network. I know i could just rebuild the docker and go through the setup but not sure what i am missing, assuming switching shouldnt be that hard? -
Has anyone tried the LSI 9400-16 from this supplier on ebay? Usually I stay away from China sellers but this looks like a great deal if its real. I know the card should work out of box, I have a storinator Q30 i am rewiring from the Rocket 750 days and am in need of either 2 9305 or 9400 cards and just evaluating my choices. https://www.ebay.com/itm/143728524336?hash=item2176e33c30:g:zicAAOSwXrpfWP70
-
Coolio, thank you.
-
Hi, found this on eBay https://www.ebay.com/itm/DELL-HBA330-J7TNV-12GB-s-3rd-Gen-LSI-SAS3008-HBA-9300-9311-8i-IT-MODE/312802843133?epid=18034943113&hash=item48d48099fd:g:wCwAAOSw8A1do1EN saw that a 9311-8i LSI is supported in IT mode, so I am guessing so will this. I am intending to run 3-4x SAS3 4-6TB HGST drives in BTRFS pool, and 3x 1TB raid5 cache. This will purpose as a workstation with 2 VMs, Win10/Linux for different workloads. Assuming this will suffice, or is there a better choice? According to the wiki this will not do sas3, just sata3?
-
Yes it did.
-
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
I believe the docker got an update over the last few days, now when I try to look at recordings, only the current day shows. Nothing else is there. Anyone seen this behavior before? Got this in the error log when I try to recover the database under config 1562943122.591 2019-07-12 09:52:02.591/CDT: ERROR [uv.recording.sync] Unable to process: /media/recordings in RecordingSynchronizationTask 1562943122.588 2019-07-12 09:52:02.588/CDT: ERROR [uv.recording.sync] Unable to process: /media/camera in RecordingSynchronizationTask 1562942781.886 2019-07-12 09:46:21.886/CDT: ERROR [uv.db.svc] Failed to acquire client connection null in MongoDb-Connecting Strange if I try to to last week/month recordings show, but not specified times. Its almost like the indexing on recordings is not functional so I am assuming it has something to do with the MongoDB?. For now downgrading controller and cameras fixes the cant see recordings issue. If anyone has any ideas with regards to this, much appreciated. server.log -
Thank you sir, didnt know you can do that. Ran into some other issues after BIOS update but that is all straightened out. So ya 6.7 does not work at all, 6.6.7 works perfect. My Adaptec 71605H is on latest firmware and so is the MOBO Z10PE-D16 WS. Thanks again..................virtual beer gifted
-
I do not want to mess anything up so could you be more specific, there is a folder called previous on the USB but its probably the 6.7 update, is there anywhere else I can get these files?
-
The rollback under Update OS only gives me option to 6.7, is there another way to revert back to a previous release?
-
Now that I might think about it I might have been on 6.6.6 i think and had a update pending and hit update again to 6.7.2 since the notification was up. Could that have done anything?
-
Anything I can do to get the array up and running? I tried reverting back to 6.7 but the same thing happens. It was running perfectly fine before the update.
-
What does that mean exactly, possible causes?
-
Updated to 6.7.2 and got the missing drive issue, was running 6.7 before this perfectly fine, tried reverting with nothing. Looking over boot the Adaptec HBA is loading fine during boot sequence but UnRaid is not seeing any drives. Can anyone help? Checked BIOS, drives are shown. unwejaton-diagnostics-20190701-0459.zip
-
So i have 3 960GB SSDs as my cache pool, and I set it to a Raid5 config but it only shows that the cache pool size is 1.4TB. I apologize for my ignorance in advance but shouldn't it be 1.92TB and the extra 960GB as redundancy or does BTRFS raid5 work differently?
-
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
That worked great, thanks. Now if Ubiquiti made it easy to re-add remote access to all user accounts it would be great....... -
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
Did any other cameras work or are still in the Managing status? -
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
If you can still log into the camera GUI or SSH into it, just point it to the controller or use the adaption token from the controller GUI, it should take it as long as the firmwares are compatible. I just learned that the hard way....... -
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
it took me back to 3.9.7-beta on the controller and I had to downgrade way down to UVC-G3 4.2.59 and then it upgraded the cameras again to 4.3.9 -
[support] pducharme's Dockers support thread
kaine1688 replied to Pducharme's topic in Docker Containers
Same thing just happened to me, I had to downgrade the firmware on each camera....bit annoying but it worked. Although I added :beta to the repository and it went back quite a bit further on the controller release.