lixe

Not really important, „about this mac“ shows me the correct cpu speed but as type only „Unknown“, how can I „correct“ that?

I seem to recall that someone was able to passthrough a single RX 580 GPU? Just selecting it in the vm setup brings a black picture and this error in the logs: 2018-06-09T12:01:20.045524Z qemu-system-x86_64: -device vfio-pci,host=09:00.0,id=hostdev0,bus=pci.0,addr=0x5: Failed to mmap 0000:09:00.0 BAR 0. Performance may be slow After that I downloaded the vbios from techpowerup, now I get this (plenty of times): 2018-06-09T11:57:01.803852Z qemu-system-x86_64: vfio_region_write(0000:09:00.0:region0+0x13168, 0x0,8) failed: Device or resource busy The monitor just says "Graphic Console" or something like that. I've also tried a windows vm and its exactly the same... PS of course my IOMMU groups are absolutely fine. EDIT: had to disable UEFI boot and use Legacy instead, found it by chance in an other topic. So now without vbios file -> no picture, with vbios file -> I get a picture! But with serious display errors, both in win and mac.

Thanks! And by using FakeSMC there's also not a higher chance of being banned by Apple when using iCloud (which never seems to happen anyway)? A little bit off topic maybe, but some seem to have got it working here. If I try to "exclude" an usb controller on my motherboard for the vm, how do I know which ports are actually affected?

Are there any benefits in using an actual osk key instead of the FakeSMC or is it just "cleaner"? By the way does it matter where the osk key come from? So to speak, could I use the osk key from an old macbook for running an vm on an imac (with unraid)?

I’ve just found out that Mac isn’t using a “usual” bios on its GPUs but instead an EFI version and you can also flash certain GPUs so that you get an “actual” Mac GPU. So I was thinking: when you have only one Nvidia GPU installed you need to separately load the bios rom file (for passthrough), because otherwise its shadowed. Would it be possible to load the Mac rom file (in case you got the right GPU) so it will be perfectly supported by Mac OS without flashing the GPU card itself?

Thanks! Can someone recommend a solution to get all the Wifi and BT features working (like Handoff, Continuity, Instant Hotspot and so on)? I've read some posts on tonymac, and most people seem to use a pcie card with BCM94360CD or BCM943602CS, so I would passthrough the pcie slot and the usb2 header on my motherboard. But maybe there's a better solution since it's a VM. Or a total different solution I don't need Wifi in the end, because I will use the eth bridge, but without a WiFi card stuff like Airdrop won't work as far as I know.

That’s pretty nice, didn’t expect that! Can I check somewhere (for future updates) whether it is safe to just install the update or at least to know what to do?

I’m about to order a new pc for unraid and especially a daily Mac OS VM machine. I’ve got a Mac OS VM up and running on my current machine, but there’s something I didn’t thing about before. How much trouble is a update for example from 10.13.3 to 10.13.4. I guess it’s not just performing it in the App Store and rebooting the machine? For every new Mac OS system I will probably have to wait until someone figured it all out and then just do the same as a new install and it will instead update the existing system.

Yesterday I’ve tried to get a macOS VM up and running, just for testing purposes right now, because my HP Gen8 (Celeron G1610T) won’t be powerful enough to seriously use it. So I created a high sierra stick. Installed Clover onto it (newest version, also showing up APFS, APFS patched? and HFS Plus), but I was able to also select OsxAptioFix3Drv? Should I select this one or still “version” 2? I tried both so far... After that I did everythink like I was told to in the space invader one video. I did only skip the fakeSMC kext part, since that shouldn’t be of any use anymore because qemu 2.9?everything else should be the same like in the video? After that I’ve put the stick in my HP machine and created an image. I’ve the created the VM and did modify the xml like I’m told to. Clover starts, but booting the installation process gets stuck at about 2/3... Any suggestions?:)

Also got the curl error, but just had to change my endpoint, now it's working again! But by the way, is this notification in my log normal "WARNING: file 'credentials.conf' is group or others accessible"? As far as I can tell, there's only my Pia login saved into, so I tried deleting it and restarting delugevpn. Of course the file got created again, but the notification still pops up...

Thank you so much! That did it

Thats the problem, even if I reenable bridge again I don't get "custom br0" anymore.

Yes of course. But if I do that, I don't get "custom br0" for my dockers anymore, it just won't show up, even if it is activated in my docker settings.

Hi there, for some time I was bridging eth0 and eth1 on my unraid server, but now didn't need it anymore. So I stopped the array and disabled bridging. Since then I'm not able to choose "custom br0" as network type for my dockers. I've tried nearly everything, but it won't show up. I've disabled and enabled "custom" in the docker settings, disabled and enabled bridging in my network settings. I've even updated to 6.5.1-rc3. But the best I can do right now is to disable bridging and then I get at least "custom eth0".

Yes, i have the exact same problem. Doesn't matter whether I'm using Sab or Nzgbet... I'm not using a SSD as cache yet, but I don't think that that's the main problem. I've read something about CPU wait for I/O time in an other thread, but even limiting my CPU and Memory resources by using a docker command doesn't solve the problem