b0mb

Members
  • Posts

    116
  • Joined

  • Last visited

Everything posted by b0mb

  1. Yes... And than add the device in Emby backend where you configure transcoding... And you have to add some variable to the container so that emby can access /dev/dri as a user group video. That's explained in the docker hub of the netcore container Gesendet von meinem Redmi Note 3 mit Tapatalk
  2. Actually only VAAPI transcoding works but very well. You can use the old config directory but it's recommended to deactivate port mapping in Emby backend to prevent crashing on some celeron and Pentium cpus. Gesendet von meinem Redmi Note 3 mit Tapatalk
  3. ok... this is what i´ve found in docker.log maybe it helps Dec 29 06:23:16 twilight kernel: traps: EmbyServer[29269] trap invalid opcode ip:14769a8dd2d4 sp:1475dba5bbc0 error:0 in libcoreclr.so[14769a64f000+39e000] Dec 29 06:24:14 twilight kernel: docker0: port 8(vethfb7a602) entered blocking state Dec 29 06:24:14 twilight kernel: docker0: port 8(vethfb7a602) entered disabled state Dec 29 06:24:14 twilight kernel: device vethfb7a602 entered promiscuous mode Dec 29 06:24:14 twilight kernel: IPv6: ADDRCONF(NETDEV_UP): vethfb7a602: link is not ready Dec 29 06:24:14 twilight kernel: eth0: renamed from vetha0c2e55 Dec 29 06:24:14 twilight kernel: IPv6: ADDRCONF(NETDEV_CHANGE): vethfb7a602: link becomes ready Dec 29 06:24:14 twilight kernel: docker0: port 8(vethfb7a602) entered blocking state Dec 29 06:24:14 twilight kernel: docker0: port 8(vethfb7a602) entered forwarding state Dec 29 06:24:16 twilight avahi-daemon[11152]: Joining mDNS multicast group on interface vethfb7a602.IPv6 with address fe80::6855:4eff:fe41:5c4a. Dec 29 06:24:16 twilight avahi-daemon[11152]: New relevant interface vethfb7a602.IPv6 for mDNS. Dec 29 06:24:16 twilight avahi-daemon[11152]: Registering new address record for fe80::6855:4eff:fe41:5c4a on vethfb7a602.*. Dec 29 06:26:10 twilight kernel: traps: EmbyServer[31641] trap invalid opcode ip:14d7ff0302d4 sp:14d73fdc5bc0 error:0 in libcoreclr.so[14d7feda2000+39e000] Dec 29 06:26:14 twilight kernel: docker0: port 8(vethfb7a602) entered disabled state Dec 29 06:26:14 twilight kernel: vetha0c2e55: renamed from eth0 Dec 29 06:26:14 twilight avahi-daemon[11152]: Interface vethfb7a602.IPv6 no longer relevant for mDNS. Dec 29 06:26:14 twilight avahi-daemon[11152]: Leaving mDNS multicast group on interface vethfb7a602.IPv6 with address fe80::6855:4eff:fe41:5c4a. Dec 29 06:26:14 twilight kernel: docker0: port 8(vethfb7a602) entered disabled state Dec 29 06:26:14 twilight kernel: device vethfb7a602 left promiscuous mode Dec 29 06:26:14 twilight kernel: docker0: port 8(vethfb7a602) entered disabled state Dec 29 06:26:14 twilight avahi-daemon[11152]: Withdrawing address record for fe80::6855:4eff:fe41:5c4a on vethfb7a602. Dec 29 06:32:48 twilight kernel: traps: EmbyServer[13360] trap invalid opcode ip:14eb98b4b2d4 sp:14eb7e200bc0 error:0 in libcoreclr.so[14eb988bd000+39e000]
  4. The new netcore container doesn't using unraid with a G4560 or J3455 CPU. HW transcoding looks very good. Gesendet von meinem Redmi Note 3 mit Tapatalk
  5. Pls can someone test this. Meanwhile several places with the mentioned cpus wrote in Emby or other forums with the same problem like me. An i3 cpu seems to run well btw.... Gesendet von meinem Redmi Note 3 mit Tapatalk
  6. Hi! I am running this container on latest unRAID build actually. The old mono Container is running without any problem in host mode. The new Net Dot Container must first be configures in bridged mode.I´ve forwared Port 8888 to 8096 which is emby standard port. After doing this i´ve changed the port in emby backend from 8096 to 8888 and switched the container from bridge to host mode. Now the container works in host mode on port 8888. If i run the container in host mode without changig ports it crashed immediately after openening the wizard. It would be nice if some1 with skills could proof this problem. It might be kernel related i guess because other users do have the same problem on unraid but on OMV with Pentium G4560 it is running fine. My CPU is J3455 btw. Thx in advance! b0mb
  7. I've disabled the parking of my wdgreens using latest wdidle3 from ubcd without having any problems. I've read in stone thread that the old version 1.03 is causing problems on newer drives. The actual version is 1.05 Gesendet von meinem Redmi Note 3 mit Tapatalk
  8. It's really wicked... I'm using exact the same config like I did on OMV. Switched to SAB now where speed is maxed out. Dunno what might be the reason for the problems with Nzbget.... Gesendet von meinem Redmi Note 3 mit Tapatalk
  9. Hi! When i turn on my VU+ SAT Receiver the drive where the share for my recordings is stored spins up. For what i understand i don´t have to activate Dir Caching because the user shares are cached automatically. My VU+ is running VTI Enigma 2 Image and its mounting my "recrodings" share using AutoFS. I have also activated that its using cache (only use, not only or prefer) - mover is moving the files in the night. Do u have any idea or tipp for me? Thx in advance! Cheers! b0mb
  10. Never mind! After deactivating the idle timer of the wd drive once again using the wdidle3 tool everything seems to be running as it should. Cheers! b0mb Gesendet von meinem Redmi Note 3 mit Tapatalk
  11. Hi! I have problem with putting one of my drives into sleep. It's an wd green 4tb drive where I've already removed the parking timer using idle3-tools. As I've already found out in the past using OMV the only way to put any kind of drive proper into sleep is using hd-idle. So i did also the last months with this drive. Now on unRAID I have the problem again that it works with hd-parm and no proper shutdown is possible. So I would really appreciate if you would implement hd-idle for spinning drives down or would compile it for Slackware and tell me what to do to use it with unRAID instead of hd-parm. Pls help me with this really annoying problem guys. Thx in advance! b0mb Gesendet von meinem Redmi Note 3 mit Tapatalk
  12. Hi! I just came back again from OMV to unRAID. I have a 400 MBiT Cableline and with unRAID i get about 40 - 45 MB/S where on OMV i had 49 - 50 MB with the same settings (also used this container there) I tried Sabnzbd on unRAID where i do also have FULLSPEED @ 50 MB/S. Downloads are going on an Samsung SSD as cachedrive which is btrfs formatted. Does any1 have an idea? Thx in advance! b0mb
  13. btw. this is how it´s locking inside the plex container... root@twilightzone:/# vainfo error: XDG_RUNTIME_DIR not set in the environment. error: can't connect to X server! libva info: VA-API version 0.39.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_0_39 libva info: va_openDriver() returns 0 vainfo: VA-API version: 0.39 (libva 1.7.0) vainfo: Driver version: Intel i965 driver for Intel(R) Broxton - 1.7.0 vainfo: Supported profile and entrypoints VAProfileMPEG2Simple : VAEntrypointVLD VAProfileMPEG2Main : VAEntrypointVLD VAProfileH264ConstrainedBaseline: VAEntrypointVLD VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice VAProfileH264Main : VAEntrypointVLD VAProfileH264Main : VAEntrypointEncSlice VAProfileH264High : VAEntrypointVLD VAProfileH264High : VAEntrypointEncSlice VAProfileH264MultiviewHigh : VAEntrypointVLD VAProfileH264MultiviewHigh : VAEntrypointEncSlice VAProfileH264StereoHigh : VAEntrypointVLD VAProfileH264StereoHigh : VAEntrypointEncSlice VAProfileVC1Simple : VAEntrypointVLD VAProfileVC1Main : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD VAProfileNone : VAEntrypointVideoProc VAProfileJPEGBaseline : VAEntrypointVLD VAProfileJPEGBaseline : VAEntrypointEncPicture VAProfileVP8Version0_3 : VAEntrypointVLD VAProfileVP8Version0_3 : VAEntrypointEncSlice VAProfileHEVCMain : VAEntrypointVLD VAProfileHEVCMain : VAEntrypointEncSlice VAProfileHEVCMain10 : VAEntrypointVLD VAProfileVP9Profile0 : VAEntrypointVLD so i guess it should work but i can´t test as i don´t have a plex pass...
  14. Module Size Used by i915 909208 1 fbcon 33164 71 bitblit 4361 1 fbcon fbcon_rotate 1964 1 bitblit fbcon_ccw 4678 1 fbcon_rotate fbcon_ud 4805 1 fbcon_rotate fbcon_cw 4606 1 fbcon_rotate softcursor 1341 4 fbcon_ud,fbcon_cw,fbcon_ccw,bitblit font 7588 1 fbcon i2c_algo_bit 4752 1 i915 drm_kms_helper 86945 1 i915 cfbfillrect 3306 1 drm_kms_helper cfbimgblt 2047 1 drm_kms_helper cfbcopyarea 3006 1 drm_kms_helper drm 221592 3 i915,drm_kms_helper intel_gtt 10996 1 i915 agpgart 21314 2 intel_gtt,drm syscopyarea 2942 1 drm_kms_helper sysfillrect 3178 1 drm_kms_helper sysimgblt 2047 1 drm_kms_helper fb_sys_fops 1378 1 drm_kms_helper fb 29760 8 fbcon_ud,fbcon_cw,fbcon_ccw,bitblit,softcursor,i 915,fbcon,drm_kms_helper fbdev 1030 2 fb,fbcon xt_CHECKSUM 1335 1 iptable_mangle 1658 1 ipt_REJECT 1521 2 nf_reject_ipv4 2483 1 ipt_REJECT ebtable_filter 1903 0 ebtables 14552 1 ebtable_filter vhost_net 9091 0 tun 19304 2 vhost_net vhost 19681 1 vhost_net macvtap 11622 1 vhost_net macvlan 12389 1 macvtap xt_nat 1913 11 veth 4966 0 ipt_MASQUERADE 1277 15 nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE iptable_nat 1897 1 nf_conntrack_ipv4 5874 3 nf_nat_ipv4 4199 1 iptable_nat iptable_filter 1706 2 ip_tables 9853 3 iptable_mangle,iptable_filter,iptable_nat nf_nat 11145 3 xt_nat,nf_nat_masquerade_ipv4,nf_nat_ipv4 md_mod 36572 4 bonding 92464 0 x86_pkg_temp_thermal 4669 0 coretemp 5340 0 kvm_intel 160423 0 kvm 289582 1 kvm_intel i2c_i801 11888 0 i2c_smbus 3041 1 i2c_i801 i2c_core 20390 6 i2c_algo_bit,i2c_i801,i2c_smbus,i915,drm_kms_hel per,drm r8169 58718 0 ahci 26326 4 mii 3587 1 r8169 libahci 19716 1 ahci video 27138 1 i915 backlight 5833 2 video,i915 my CPU is a j3455
  15. So does any1 have VAAPI HW decoding to get running with the Emby Container?
  16. Hi! I would like to use hardware Transcoding within docker container of Plex and Emby but it seems the there for I have to install Mesa and VAAPI drivers first and I handed absolutely no clue how to do this in Slackware. So i would appreciate if someone could help me. Thanks in advance! b0mb Gesendet von meinem Redmi Note 3 mit Tapatalk
  17. You have to wake the server sending a magic packet.... WOL in your bios should also be activated [emoji6] Gesendet von meinem Redmi Note 3 mit Tapatalk
  18. Got it working now Port 443 was in use fore remote service of my router... changed the port now and forwarded 443 to the unraid server
  19. The XXX was just a placeholder ... The domain it's listed on the site you've posted Gesendet von meinem Redmi Note 3 mit Tapatalk
  20. Hi! I´m trying to use this nice container but it kills itself because of an error right after start Failed authorization procedure. xxx.4irc.com (tls-sni-01): urn:acme:error:unauthorized :: The client lacks sufficient authorization :: Incorrect validation certificate for tls-sni-01 challenge. Requested Does any1 have a tipp for me? I´ve entered "4irc.com" in the domain field of the template and xxx into the subdomain field. I´ve also set only subdomains to true. Thx! b0mb
  21. Thx! Download is working now [emoji6] Gesendet von meinem Redmi Note 3 mit Tapatalk
  22. Still no update here seen... Does it take some time to appear? :-) Gesendet von meinem Redmi Note 3 mit Tapatalk
  23. Hi! I just installed the latest docker container on unRAID 6.3.3 When i enter my name etc in the web interface of tonido i get the following any idea? Usually none of my container does have a problem with connection to the internet. Thx! b0mb
  24. Do you have a tutorial for that? Gesendet von meinem Redmi Note 3 mit Tapatalk