b0mb

Members
  • Posts

    116
  • Joined

  • Last visited

Everything posted by b0mb

  1. Welche Einstellung bei mir im Bios ist falsch, dass ich nur Powersave und Performance als Governor wählen kann? Habe ja gelesen, dass hier auch wer Conservative nutzt. ^^
  2. Ich habe nen altes Thermaltake Core V1 und da kann habe ich zwei Halterungen für Disks, die nebeneinander angeordnet werden. Bei der Montage und dem Problem mit dem Kabel hätte ich gern mal mein langes Gesicht gesehen. ^^
  3. Also das mitgelieferte Stromkabel für die Platten ist ja knuffig. Wenn man, so wie ich, zwei Laufwerke nebeneinander mit Gehäuse platzieren muss, dann ist man bei dem kurzen Kabel direkt in den Hintern gekniffen. ^^ Mal was nen ordentlches Y-Kabel mit 20 cm Länge bestellt.
  4. So can i put whole folders in to that textfile for the skipping list?
  5. Ich habe jetzt mal den Binhex Container von Krusader installiert. Der unterstützt SMB und hat mein Problem somit vorerst gelöst. Edit: Habe mich am Wochenende nun noch mal mit der Ordnerstruktur auseinandergesetzt und weiss nun auch, wo ich die Date via MC verschieben kann, damit alles da landet, wo es hingehört.
  6. Sorry, dass mit dem falschen Forum hatte ich nicht auf dem Schirm. Ich arbeite halt am liebsten mit dem MC und da habe ich ja die beiden User Ordner und den Cache Ordner, mit denen ich arbeiten würde. Da stellt sich jetzt halt die Frage, wie ich mittels MC die Daten korrekt kopiere oder verschiebe, so dass diese genauso behandelt werden, als wenn ich sie über SMB verschoben hätte. Was natürlich auch noch eine Idee wert wäre... Double Commander Container und dort die SMB Freigaben einrichten. Krusader ist nicht mein Ding.
  7. Hi, nach einiger Abstinenz habe ich mal wieder mein Brocken auf unRAID aufgesetzt. Es gibt halt doch nichts besseres. Nun habe ich Shares eingerichtet, die den Cache bevorzugen und dann später mal vom Mover auf das Array verfrachten. Früher habe ich über Windows mit dem Total Commander auf die SMB-Freigaben zugegriffen und dann wurde natürlich immer alles korrekt behandelt. Von wo nach wo muss ich jetzt kopieren, damit auch korrekt läuft, wenn ich z. B. mit dem MC direkt aus der Shell auf dem Server kopiere oder verschiebe? Greetz! b0mb
  8. @alturismo ich beobachte das mal.... im Syslog stand zu letzt was von Hardware Error heute abend schließe ich mal nen Monitor an und checke noch mal die BIOS-Settings ^^ Edit: Habe mal nen bisschen an den RAM-Settings justiert - jetzt scheint es stabil zu laufen.
  9. Ich habe das Board jetzt in Betrieb und bekomme natürlich auch diese DP-Fehlermeldung, allerdings startet mein System dann gerne während eines laufenden Kopiervorgangs neu. Gibt es da einen Workaround? Bin bisher nicht fündig geworden. ^^
  10. Hallöchen, ich habe mir jetzt auch das Asrock N100-DC geholt. Kann ich da erst mal mein altes Scalar 12V 72W Netzteil nehmen? Bin da nicht so begangen, was Spannungen betrifft Da kommt erst mal nicht mehr rein, als ne 2TB NVME und ne 2.5" mit 5TB.
  11. @hugenbdd I know but it would be nice to set G also instead of only M
  12. it would be nice if we could define the size of files bigger... biggest size is 1024 kb..... wouls be niche if this could be set as big as the user want
  13. after todays latest update i get "internal server error" while opening papermerge this is what the container log says During handling of the above exception, another exception occurred: Traceback (most recent call last): File "./manage.py", line 18, in <module> raise ImportError( ImportError: Couldn't import Django. Are you sure it's installed and available on your PYTHONPATH environment variable? Did you forget to activate a virtual environment? [uwsgi-daemons] respawning "/usr/bin/python3 ./manage.py worker" (uid: 1000 gid: 100) Traceback (most recent call last): File "./manage.py", line 10, in <module> from django.core.management import execute_from_command_line ModuleNotFoundError: No module named 'django' edit: meanwhile the container has been fixed
  14. thx a lot! the mod is a nice solution to satisfy the mob
  15. i guess the mod is the cleanest solution as its provided by the builder of the container dunno.... it seems to work
  16. unRAID Web Interface => Docker = Papermerge Container Icon => left mousebutton => >_Console
  17. to get german the interface in german language add the following to papermerge.conf.py in appdata folder LANGUAGE_CODE = "de-DE" to get german language for OCR go to docker shell and type apt-get install tesseract-ocr-deu and change the following in papermerge.conf.py like this OCR_DEFAULT_LANGUAGE = "deu" OCR_LANGUAGES = { "deu": "Deutsch", } And voila! German interface and OCR.
  18. Shouldn´t it be available right now? I´ve added the key to the unraid template but it did not load ^^ edit: i guess the mod isn´t final yet ....
  19. thx! i´ve had to put sh infront of /config but it works
  20. the problem is that most of my docker containers are set to auto update and so the best solution would be that such a script would run after restarting the container
  21. Hi! I need to execute a few commands while starting a container. apk add py3-chardet && \ apk add py3-pip && \ pip uninstall -y apprise && \ pip install apprise does any1 know what i have to do? thx in advance! b0mb
  22. so adding the following solves the problem run apk add py3-chardet && \ apk add py3-pip && \ pip uninstall -y apprise && \ pip install apprise how can i add that persistent to the container?
  23. guys my notify script still doesn´t work with the container since it changed to python3 when i try to send a test msg it say that the SIX module is missing pls any1 know how to fix this?
  24. since the python3 update i can´t get my fav notifiy script running... https://github.com/caronc/nzb-notify when i try to test my config i get an error saying "module six is missing" ^^