jbuszkie

I can't get E-mail to work... root@Tower:~# unraid_notify -d > < 220 equipment to accept, transmit, or distribute unsolicited e-mail. > HELO Tower < 250 elasmtp-kukur.atl.sa.earthlink.net Hello Tower [209.113.159.130] > AUTH LOGIN < 503 AUTH command used when not advertised 503 AUTH command used when not advertised Using stuff from another thread.. I get root@Tower:~# telnet smtpauth.earthlink.net 25 Trying 207.69.189.204... Connected to smtpauth.earthlink.net (207.69.189.204). Escape character is '^]'. 220-elasmtp-spurfowl.atl.sa.earthlink.net ESMTP Exim 4.67 #1 Tue, 20 Jan 2009 17:59:36 -0500 220-NO UCE. EarthLink does not authorize the use of its computers or network 220 equipment to accept, transmit, or distribute unsolicited e-mail. EHLO 250-elasmtp-spurfowl.atl.sa.earthlink.net Hello [209.113.159.130] 250-SIZE 14680064 250-PIPELINING 250-AUTH PLAIN LOGIN CRAM-MD5 250-STARTTLS 250 HELP help 214-Commands supported: 214 AUTH STARTTLS HELO EHLO MAIL RCPT DATA NOOP QUIT RSET HELP quit 221 elasmtp-spurfowl.atl.sa.earthlink.net closing connection Connection closed by foreign host. Where do I go from here? I'm no smtp expert! I know this works somewhat because I can send through my old netscape e-mail program and I've setup through my backup utility to send mail (acronis) Jim

Thanks! I appreciate the help.. 1. I actually did all those steps. I found the procedure somewhere else on the net. I really think my problem stems from the fact that I'm trying to update the flash from a usb drive, not a floppy. I think the awdflash utility needs a real floppy drive. I was trying my best avoid hooking up a floppy! I'll *grunt* hook up a floppy tonight and try it again. Even the stock bios didn't work. 2. As for the stability of the a7n8x deluxe... I've been using it for several months now and I haven't had any sync issues. To this day, I'm not using the on board sata. I'm trying to update it so I can switch to it and see if it's faster. If I start seeing sync issues I'll abandon it all together and buy a new system.. I'm strapped for cash right now so I'm hoping to get by with this for a while. I also only have 3 drives. I think I'll only stick with the free version as I feel the cost for the regular and pro are about 2x what I feel they should be. But that's a different rant! Maybe 3 disks won't cause synch issues and maybe more that 3 do? Who knows? It also might be that I'm not using the onboard sata right now. I have a PCI card that has 2 sata and 1 PATA connectors on it. I remember when I first built the system for and HTPC, the onboard sata would never record HD correctly. That's why I got the plugin card. Maybe it all stems from that? That's why I was hoping the bios upgrade would have fixed those issues.. Jim

Yeah.. After a little research I discovered that too.. But now I can update my bios after I repacked it.. Even with the stock bios.. The awdflash utility just hangs when trying to write the flash. I'll have to do more investigation.. I may be stuck with that I have..

This is what I found. http://www.siliconimage.com/support/searchresults.aspx?pid=63&cat=15 Was this the rigth stuff? Jim

I think I found it.. was it the 4284.bin? And why didn't you use the flash utility on their website?

Any chance you can post the bios? The link doesn't seem to be broken.. I have this board and I"m currently using a plugin card and I'm getting really slow results.. I'd like to try the onboard... Thanks, Jim

Yeah.. I'm going to try another flash drive.. I might behave better.. The one I have is a freebie My wife got at a conference.. So it's kinda crappy! My other thought is I believe I can change the USB ports from 5VSB powered to Regular 5V. At least then I might be able to power off and then WOL power up.. I'll give that a try too.. jim

Not what I wanted to hear.. *pout* I was hoping to not buy a new board just yet.. Well.. Lets hope I don't have to reboot often!

I have an a7n8x deluxe MB and a generic flash drive. From a cold power up I can boot from the USB with no issues. but if I reboot or regular power cycle, it doesn't see the flash drive and won't boot. My only recourse is to completly turn off the board (switch on the PS) to kill 5VSB. Then I can boot again.. This is very annoying if I have to remote reboot. Has anyone seen this or can point me in the right direction? Thanks, Jim

Never mind.... I tried the HP formatting tool... And what do you know.. it works now.. Playtime! (should be bedtime!)

I'm trying unRAID for the first time and I'm having some issues.. It started out with the network not working.. but back tracking.. it can't find the config files. ... backtracking further.. It has no FS mounted... Backtracking further... I get a sdc: unknown partition table. Now I believe I folllowed the usb prep correctly since it does boot all the way up to the prompt.. Now it is a POS usb drive.. but that's all I have handy.. And Windows has no issues with it... So it should work.. right?? Any thoughts? ??? Oh.. And I downloaded syslinux 3.63 and unRAID 4.3