darkslyde

EDIT: After restarting the server, so I can get a clean diagnostic file, the issue miraculously resolved itself. I no longer have to transfer the folders in smaller batches. It has also stopped writing duplicate empty folders on the origin drive... Having same issue, not enough space unless I transfer smaller batch and not the whole folder. Also, the transfer (using Krusader) is re-creating the share's folders on the origin pool. Origin: Rockerboys Destination: Netrunners Share Config: Share Computed:

Update: -replaced problematic sata cables -checked emulated drive, looked good -extended smart test yielded no issues -rebuilt on top of original drive (stop array, unassigned the "bad" disk, started array, stopped again, re-assigned the same drive, start in maint mode, rebuild sync) -added another wd red plus for second parity tl;dr - it was bad sata cables - drive did not fail.

Thank you for all the quick replies! I've decided to purchase individual cables for now. The drives are in a 5-disk hotswap bay (Silverstone CS351) so for now, I'm gonna say it's not the sata power cables.

Copy that! Shutting down the box, order new cables and update the post when those are done and I've rebuilt. Thank you for the help! PS: the cables I was using was this (CABLEDECONN High Speed 6Gbps 6pcs/Set Sata Cable SAS Cable for Server 0.5m) Is it bad practice to use these type of cables?

Roger that! Updated first post.

So I got this error notification that one of the drives is disabled. Here's some info on the box. -Fix Common Problems doesn't give any information why and I don't know where to go from here. -The drives are not even a year old and still under warranty. Bought Apr 2022. -This Unraid-Box sits in my office and does Windows backup daily, raw photo dump occasionally -My local backup for tons of raw photography files in their respective formats (.nef, .cr2, .raf plus some gopro videos in raw/compressed) (The compressed versions are backed up online but not the raws) -Also holds media for Plex (scheduled maints at 2am-5am daily) -The drives are set to spin down after 1 hour of inactivity -Version 6.12.0-rc2 (Uptime 5 days 9 hours 8 minutes) Currently running an extended smart test (short self test passed without errors) Any help is appreciated! Thank you in advance! xfs_repair -nv: terra-diagnostics-20230327-0958.zip

thank you. just mounting does allow me to see it in krusader along with the partitions. i don't know why i was passing through before.

i was using krusader to transfer the files on those unassigned drives to /mnt/user/ Edit: seems even when its unmounted then passedthrough, i don't see it in krusader. nothing in /mnt/disks/ or remotes Edit2: maybe the drive is being passed but i dont see the partition

i was migrating some of my files over to my main unraid server last night, this morning's update borked the plugin and i can't passthrough the drive after mounting. then it wouldn't let me unmount the drive until i rebooted the server. unfortunately the issue remained, i can passthrough if its not mounted but the moment i mount, the option to passthrough disappears. any idea what's going on?

I've figured it out, it was doing the whole loopback when you're inside the same network, the moment i rerouted my pc to a completely different network, it just worked. still weird that my KF2 Server pops up on the server list when i'm on the same network again, thank you for the amazing work!

Are you using the default (27015) for query port on your own vrising server? Since I'm using the default of 9877 of your docker, it doesn't seem to publish my server to the master list but your Killing Floor 2 docker that I'm running shows up on there instead... it's baffling LOL. My KF2 server: ~ #Unstreamable's Private KF2 Server ~ My V Rising server: #Unstreamable VTuber Rising

Just a head's up ich777, when you set validate to true, it overwrites all the settings to the default docker files, so whatever changes you've made on the adminlist.txt/banlist.txt and the two json files are deleted. I saw the server patch that I decided I should validate after restarting the server and I lost all the custom game settings I had. Edit: I'm talking about the files in {unraidservername}\appdata\vrising\VRisingServer_Data\StreamingAssets\Settings

Amazing, I guess I'm sending a six pack your way hahahah!

I also did not get invited but it comes out tomorrow on early access for $19.99, I didn't get a solid answer from official channels (website/discord) about a linux version i hope we find out more tomorrow

First off, @ich777, thank you for all the amazing work! It sounds like V-Rising is going to be the next fun survival game similar to Valheim, is there any chance you'll create a V-Rising Dedicated Server docker? And thank you in advance if you are planning on creating one!

gonna go sleep then hope it shows up on the list tomorrow. thanks, mate! keep up the amazing work!

here's the template changes. password is longer than 5 characters.

EDIT: Seems like i can now connect to it but only if I quickly connect through steam server window (when i hit refresh, it will show it for a few seconds then disappear from the list of favorites) might still be treating it as LAN connection vs a steam dedicated server that can be accessed by my friends over WAN.

thanks ich777, ill keep it running overnight and wait to see if shows up on the valheim server lists. when i see it on the steam server list, it shows no game and 0/64 players. i'll play around with it a bit more and see. I'm stuck using my ISP router so i dont know if the port forward has resolved (my ubiquiti stuff is on loan atm). Hopefully everything works out. Thanks again for everything.

for Valheim, looking at the log, it seems to end at this point and goes no further: ---Server ready--- ---Start Server--- CAppInfoCacheReadFromDiskThread took 3 milliseconds to initialize CApplicationManagerPopulateThread took 0 milliseconds to initialize (will have waited on CAppInfoCacheReadFromDiskThread) RecordSteamInterfaceCreation (PID 57): SteamGameServer012 / GameServer RecordSteamInterfaceCreation (PID 57): SteamUtils009 / Utils Setting breakpad minidump AppID = 892970 RecordSteamInterfaceCreation (PID 57): SteamGameServer012 / GameServer RecordSteamInterfaceCreation (PID 57): SteamUtils009 / Utils RecordSteamInterfaceCreation (PID 57): SteamNetworking005 / Networking RecordSteamInterfaceCreation (PID 57): SteamGameServerStats001 / GameServerStats RecordSteamInterfaceCreation (PID 57): STEAMHTTP_INTERFACE_VERSION002 / HTTP RecordSteamInterfaceCreation (PID 57): STEAMINVENTORY_INTERFACE_V002 / Inventory RecordSteamInterfaceCreation (PID 57): STEAMUGC_INTERFACE_VERSION010 / UGC RecordSteamInterfaceCreation (PID 57): STEAMAPPS_INTERFACE_VERSION008 / Apps It shows up weird on steam server list (no game and can not connect to it). Am I doing something wrong or is the docker not completely initializing on my side? Again, Valheim specific. All of my other steamcmd dockers from you works fine.

If you pulled ich777's tshock docker and edit the version to 1.4.0.4 before running it all the way, you will bonk the installation. You have to keep it at 1.3.5.3 and let it run its course (you can always check by looking at the end of the log to see what server version you are running). After it has completed its thing, stop the docker, change the version. "The variable Prefered Version doesn't work anymore for Version 1.4.0.2 and up". Btw, that's the same error you get when running the tmodloader version of ich777 so whatever is common between the two is the culprit. I'm currently running the ryshe/terraria docker with tshock pre-release8 that works with 1.4.0.4

yeah, its stuck on a crash loop. even with dumping official tshock files, gonna see how ryshe/terraria/ managed to implement it. also, is journey mode disabled in your build? EDIT: I had to add: -autocreate 2 -seed XXXXXX to GAME_PARAMS so I could re-create a seeded Journey world cause relying on the serverconfig.txt autocreate & difficulty wouldn't.

any chance for an updated Terraria w/ Tshock pre8 for 1.4? or a "how to" update the docker you have with the pre-release tshock?

thanks for this, Binhex! makes it ALOT easier to track my xdcc downloads. Now I just need an automated file sorter for my /media folder

here's the crappy part; since my unifi controller software is a docker on my unraid server, whenever i bring the array down to do some tinkering, i have no way to do any changes on the config for my unifi router/switch... hence, can't force the dhcp to assign a static ip for the plex server. ugh... gonna wait till my new rack comes in, put a dedicated 1u server for the unifi controller, so i can mess with unraid without losing access to the router/switch management system.... sometimes, the things that make your life easier (dockers) are the ones that make it much worst