-
Posts
460 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by mrbilky
-
-
Does anyone have homeassistant running stable as a docker in unRAID? I followed digiblurs method and although I got it to work it was problematic and unstable, I have a vm running it on a dedicated Ryzen machine but I feel like I'm just not getting it setup right on unRAID was hoping that the latest version would have corrected the issue such as having to install the supervisor separately would really like to have it on my server as it has been rock solid for several years now and the vm is a bit slow, any takers?
-
On 5/17/2020 at 4:22 PM, lalu97 said:
Thanks...I was asking about boot device. I ordered 2 Sandisk Cruzer FIT usb 2.0, one drive to boot and another to backup the boot drive.
How is your experience with R710 so far?
The cruzer fit seems to be the goto so you should be fine there, I can't complain about the R710 but full disclosure my hearing is not the best however I also have an R410 and that thing is absolutely loud as all heck I'm still considering modding the R710 with a custom hood with noctua fans but I'm in no hurry as at this time it's not running 24/7 I custom built my daily driver and runs 24/7 and its been solid for over 2 years now you should have a good time with your setup its a proven rig
-
1 hour ago, lalu97 said:
I'm planing on setting up unraid on R710. What are you using to boot the system?
I have an R710 running unRAID if you are asking what boot device and its location I am using a store branded micro center usb 3 thumb drive put into the internal usb slot in the system, do not take that the usb 3 thumb drive is right for you I can only attest to the fact that I have both my unRAID machines running with these over a couple years now with no issues usb 2 is recommended, haha maybe my branded usb 3 devices are really usb 2 I just paid the upcharge, if you are asking what hba to use I got mine on ebay and they were "certified" for use with unRAID if you need model and brand I can dig that up
-
-
1 hour ago, sdamaged said:
I assume you've just watched Linus' latest video?
As far as i'm aware, most free is straightforward, but fill up requires that minimum free space is set correctly on each share
Spot on! I didn't really study up on it when I first started my build but every now and again I see something that makes me look harder at the options
-
So was thinking of changing my disk allocation method from high water to most free anything I need to do or be concerned with prior to making the change
-
5 minutes ago, BVL1 said:
Thanks for the help dampoe, your info helps a lot.
Gonna watch my local vendors and see if i can find a good deal on a better cpu.Try looking for a used pc with the specs you're looking for it may be cheaper I built my server from my old i7 6700 and its been great for the last 2 years 6-8 streams in PLEX 15 dockers including the ones you listed have fun with it!
- 1
-
Your system seems to be overheating your cpu is doing what it should when this occurs check fans and cooler to ensure all is working and clean also my not hurt to replace the thermal paste on the IHS
-
Anyone else not able to condense the forum in unread topics? Strange as its happening on another forum as well?
- 1
-
If I were to create a BTRFS cache pool and make them set to "only" in raid 1 is that not a striped array that will read/write at a potentially higher performance also could I create multiple cache pools from say 4 disks into 2 pool arrays?
-
I once did what you are and had dual parity but with the number of drives you currently have I question the need you would serve yourself better by making the parity a single 8TB disk and adding the 4TB and 8TB drives to your array the chances of a 2 disk failure at the same time is minimal and of course you should have a backup of any critical data on 2 other sources not connected to your server
- 1
-
1 minute ago, RJGamer1002 said:
yes
well i'm certainly no expert but I think that is the problem unRAID is seeing the 4TB as a parity drive therefore your 8TB may be conflicting if I've understood folks on here but they will certainly chime in so don't go by my observation 😉
-
-
2 hours ago, loady said:
Doesnt seem to be any that are uk based
if i can get a card delivered from within UK and needs flashing, are they difficult to flash ?
I'm told it's not but it's an unknown as I have never done it, it sounds like it's similar to a bios update with the same pitfalls of potentially bricking the card if not done properly
-
1 hour ago, rl2664 said:
There are a lot flashed cards on ebay, just search for "it-mode"
I have purchased 2 of these at different times and they were both plug and play you may be able to find cheaper but this vendor is good
-
I'll only add that you can install an ssd drive bay adapter to your optical drive bay for additional space but that does not help with a pool although check to see if you have a unoccupied sata port on your motherboard as my R710 has one your manual indicates you should have one as well then all you need is to tap a power connector with a couple wago clips and you will have 2 new options for a cache pool not sure what version of sata the R720 has but mine are sata 2 so that may be a deal breaker for you not sure of your use case
-
2 hours ago, loady said:
Just to add the HBA needs to be flashed to IT mode for the drives to be passed through to unRAID and support SMART info
-
9 hours ago, ryankenn said:
With the 9XXX series that aren't clones do they need to be flashed, or just plug and play.
I have 2 of these and they were plug and play seller very reliable:
-
Yeah you'll have considerably a higher performance running machine by upgrading I didn't realize that cpu was only dual core with no hyper threading it will be like night and day!
-
38 minutes ago, sstretchh said:
Hello everyone I am new to UNraid and wanted to get some opnions from everyone
A friend gave me the following hardware to get started and I have a questions if I updated the CPU if everyone things I would get a big performance change
currently I am running the following dockers, Plex, NZBget, Sonarr/Radarr with the following CPU / motherboard and the CPU maxes out on a regular basis
memory - 16GB : (4) HyperX Fury 4GB (1 x 4GB) DDR4 2400MHz DRAM
Processor - Intel BX80662G4400 Pentium Processor G4400 3.3 GHz
Power Supply - Rosewill Quark Series 750W Full Modular Gaming Power Supply 80 Plus Platinum
Motherboard : MSI Z170A GAMING M7 ATX DDR4 3000 (o.c.) NA Motherboards Z170A GAMING M7
If I upgrade to the following CPU will I see a big performance difference ?
Intel Core i7 6700K 4.00 GHz Unlocked Quad Core Skylake Desktop Processor, Socket LGA 1151 [BX80662I76700K]
by Intel
I appreciate any feedback
I cannot comment on the processor you currently have but I can tell you that my primary unRAID box is built around my I7 6700 non K and it performs excellent and I work it hard, its my Plex media server, my home assistant sever, and running upwards of 12 dockers and still has plenty of room in the tank
-
1 hour ago, cktulsa said:
Thanks @itimpi ! I'm thinking of going with the LSI 9211-8i : https://smile.amazon.com/SAS9211-8I-8PORT-Int-Sata-Pcie/dp/B002RL8I7M
Plus a set of SFF-8087 to SATA Forward Breakout cables.
I can probably handle the flashing to IT mode since there's instructions here (hopefully I can find the most current ones).
Curt
I have 2 of these from this vendor they were plug and play with both my unRAID boxes one home built the other a Dell R710 and seem to be a bit cheaper than that card listed:
-
12 minutes ago, Frank1940 said:
In the release notes for ver 6.8.0 in the Management Section:
You will need to run Krusader with root privileges now if you want to 'work' on the flash drive.
Never did that where would I find root privileges in krusader
-
Totally not a cli guy so I saw this posted on another thread and I ran it on my rig out of curiosity and to continue learning this stuff and found that I clearly have had a misconfigured host path in a docker and now it seems I have a lot of garbage on my flash drive, Primarily the music .cfg files I can't seem to be able to find them in krusader to remove is this right? Kinda remember there might be a setting that protected the flash drive but don't see it so maybe I'm mistaken?
-
10 hours ago, johnnie.black said:
SATA port multipliers are usually nothing but trouble and not recommended, but some can work reasonably well.
Hmm will have to follow his channel to see if he reports problems he just uploaded this the other day so time will tell
Home assistant
in General Support
Posted
Yeah I had it running like you but it seemed to just stop working unexpectedly and I would have to modify that tweak where you added the letter to the description in the supervisor settings or one of those self generated images would go off line and would need to be restarted when it worked it worked great but like I said and same scenario as you it did not go over well when it dropped off line with the wife and kids