vanes

v1 info root@unRaid:~# upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1191 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.8 battery.voltage.nominal: 12 device.mfr: CPS device.model: EX850E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.3 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.39 input.transfer.high: 0 input.transfer.low: 0 input.voltage: 227.0 input.voltage.nominal: 230 output.voltage: 225.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 24 ups.mfr: CPS ups.model: EX850E ups.productid: 0501 ups.realpower.nominal: 490 ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764 root@unRaid:~# upscmd -l ups Instant commands supported on UPS [ups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test root@unRaid:~# upsrw ups [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Maximum length: 10 Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Maximum length: 10 Value: 300 [input.transfer.high] High voltage transfer point (V) Type: STRING Maximum length: 10 Value: 0 [input.transfer.low] Low voltage transfer point (V) Type: STRING Maximum length: 10 Value: 0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Maximum length: 10 Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Maximum length: 10 Value: 30

@dmacias i tested v1 plugin! v1 works, but not as v2 after power loss UPS begins shutdown of server and after 20-30 sec turns off itself (not completed shutdown), then after 20-30 sec. turns on himself regardless of the power plug...

i see that unraid drivers and nut are newer than syno. can i test older drivers somehow?

This is friends output /volume1/homes/***$ upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 908 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 9.2 battery.voltage.nominal: 12 device.mfr: CPS device.model: EX650E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 5 driver.parameter.port: auto driver.version: DSM6-1-15205-171017-1-gf424baa driver.version.data: CyberPower HID 0.3 driver.version.internal: 0.38 input.transfer.high: 0 input.transfer.low: 0 input.voltage: 218.0 input.voltage.nominal: 230 output.voltage: 217.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 31 ups.mfr: CPS ups.model: EX650E ups.productid: 0501 ups.realpower.nominal: 360 ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764 i tried: upsmon -c fsd (from here http://networkupstools.org/docs/man/usbhid-ups.html) upsrw shutdown.stayoff ups tried APCPSD test (apctest kilpower test) No reaction.....

I cant get "Turn off UPS after shutdown" to work as it should! Its my first UPS, guys, point out the direction to move please =))

hi guys, need you help! I recently bought cheap UPS Cyberpower EX850E usb, I connected it, unraid detected it using APCUPSD and using NUT, everything is fine except one thing I can not make him turn off after server shutdown, so I want when power is applied again the server is turned on Bios settings after power loss set to "always on" here is Nut output: (upsc ups@localhost) battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1241 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.8 battery.voltage.nominal: 12 device.mfr: CPS device.model: EX850E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4.1 driver.version.data: CyberPower HID 0.5 driver.version.internal: 0.42 input.transfer.high: 0 input.transfer.low: 0 input.voltage: 224.0 input.voltage.nominal: 230 output.voltage: 223.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 23 ups.mfr: CPS ups.model: EX850E ups.productid: 0501 ups.realpower.nominal: 490 ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764 Instant commands supported on UPS (upscmd -l) beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test upsrw ups [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Maximum length: 10 Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Maximum length: 10 Value: 300 [input.transfer.high] High voltage transfer point (V) Type: STRING Maximum length: 10 Value: 0 [input.transfer.low] Low voltage transfer point (V) Type: STRING Maximum length: 10 Value: 0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Maximum length: 10 Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Maximum length: 10 Value: 30 please help =) UPD: my friend use such UPS whith synology nas, that use NUT, and everything works perfect. Power cut > shutdown > ups-off, and when power retained it starts

There was no more! I continue to observe.

Running 6 hours! No problems

This is WD Green "in action"

very interesting, I join the question

This is my usb controller passthrough: append vfio-pci.ids=1106:3483 initrd=/bzroot

I read , watched some reviews and knew that 50-60MB/s is normal write speed for this WD Green ssd! do not repeat my mistakes do not buy them!!!! this is write from vdisk to cache this is write from vdisk to array with parity!!!! wd blue 1TB 7200rpm

So?you want to say 50MB/s write from array to cache pool is normal? Later I will do tests with out: dockers (copy to vdisk from cache) vm`s (just copy from array to cache)

what speed other users get when writing from vdisk to cache?

Hi guys, I recently ran into a problem. I run win 10vm on unraid and use ssd cache pool of two cheap wd green 120gb for vdisk, docker and appdata. recently noticed a strange thing: when I copy files from cache pool to vdisk the speed is slow (45-50MB/s) when I copy files from vdisk to cache pool - same speed! when I copy files from vdisk to array and vice versa, speed is 170MB/s why array is faster than cache??? are these WD green so slow?? tried changing fx440, q35 vdisk share - "cache only" appdata share - "cache only" system share - "cache only" what I missed? TRIM every 8 hours, 50GB free space UPD: using MC I tried to copy big file direct from array to cache (/mnt/user/backup > /mnt/cache) 55MB/s ! very much like low ssd disks performance or btrfs raid1 performance! what tests do you recommend to do? should i try convert pool to single device for additional speed tests?

https://developer.nvidia.com/video-encode-decode-gpu-support-matrix emby can use nvenc transcoding. i tried do it in win 10vm. with passed through gt 1030(dont work) and quadro p400(work) interesting question! Can nvidia pci-e GPU be passed through emby docker container without nvidia drivers in unraid??

as I understand, we are many with such a problem. @Leliil, my countryman have same issue.

if you buy gt1030 GPU u can passthrough it to LE, and use intel hd graphics for plex transcoding! it will work 100%

you want to passthrough integrated graphics to vm! u shoud read I could not make it work on my kaby-lake i5-7400 b250 MB I think there will no be assignment on-the-fly, or VM or i915! maybe I'm wrong, correct

nvidia have NVENC! but there are a lot of "marketing" restrictions..... intel just do it! https://developer.nvidia.com/video-encode-decode-gpu-support-matrix

intel hd graphics is not needed to direct stream to devices that can natively play it! for example: 4k hevc movie on 4k tv, that support it natively, wil play as direct stream same movie on 1080p-tv that cannot support hevc/4k will need to be transcoded

if u use intel hd Graphics for plex (i915), you cant pass it through openelec vm. but u can add gt1030 card in you system and passhrough it to libreelec vm! you guys will teach me english

Thank you @dlandon , Perfect Plugin! Enhances the sense of control over the system! Great job!

i think no! i use my igpu (intel hd graphics 630) only for plex/emby

it has Intel® HD Graphics 610, that support 4k hevc 10bit etc... Everything should work perfect