mgranger
-
Posts
168 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by mgranger
-
-
When I try to login to the webui I get an error of "This site can't be reached". This is for OpenVPN-AS
-
On 3/15/2019 at 1:10 PM, OneFiveRhema said:
I switched over to delugevpn and was able to get that working correctly. I appreciate the help.
I also switched to delugevpn and that worked for me too.
-
On 2/22/2019 at 2:00 AM, bonienl said:
docker network connect <network> <container>
this is what i am getting when i run this
root@Finalizer:~# docker network connect eth3 home-assistant Error response from daemon: network eth3 not found -
I read to disable tls authentication and when I do this error
10:29 PM TCP/UDP: Incoming packet rejected from [AF_INET]XXX.XXX.X.X:1194[2], expected peer addreSS: [AF_INET]XX.XXX.XXX.XXX:1194 (allow this incoming source address/port by removing --remote or adding --float)
-
I am trying to get this setup. I have logged into the OpenVPN however I am getting this error. Are there any suggestions for getting this to start? I am trying to get it working on my Android Phone
Error: cannot locate HMAC in incoming packet from [AF_INET}] XXX.XXX.XXX.XXX:1194 -
seriously there is nothing that would allow me to access the 2nd network
-
yes i am trying to get the webui from a computer that is on 192.168.1.x
-
I am having trouble getting my NordVPN to work with Transmission_VPN. When I try to access the WebUI I get an error of "This site can't be reached"
Any ideas?
Here is what my log looks like...
Using OpenVPN provider: NORDVPN Starting OpenVPN using config default.ovpn Setting OPENVPN credentials... adding route to local network 192.168.1.0/24 via 172.17.0.1 dev eth0 Fri Feb 22 00:38:41 2019 OpenVPN 2.4.6 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 24 2018 Fri Feb 22 00:38:41 2019 library versions: OpenSSL 1.0.2g 1 Mar 2016, LZO 2.08 Fri Feb 22 00:38:41 2019 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Fri Feb 22 00:38:41 2019 NOTE: --fast-io is disabled since we are not using UDP Fri Feb 22 00:38:41 2019 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Feb 22 00:38:41 2019 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Feb 22 00:38:41 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]185.30.232.17:443 Fri Feb 22 00:38:41 2019 Socket Buffers: R=[87380->87380] S=[65536->65536] Fri Feb 22 00:38:41 2019 Attempting to establish TCP connection with [AF_INET]185.30.232.17:443 [nonblock] -
Sorry if this is a simple question but I have a docker that I want to connect to two different networks. Is there a way to do this and if there is how would I do it. Currently I have 2 different Ethernet ports and for example one is running on 192.168.1.x and the other is on 192.168.2.x. Is there a way to get the container to be able to recognize devices on both networks? Currently I have the first network recognized but unsure how to get the other one.
-
So I am trying to create a database for my Home-Assistant. I think I have everything setup but I am trying to figure out where my database file is getting saved. Is there a way to determine this and also change it. I want to save it to a specific disk/folder but not sure how to do this.
-
@dlandon I posted the link that you posted in the Home Assistant forum I ran across so hopefully that helps
-
1 hour ago, dlandon said:
See if this discussion helps: https://github.com/dlandon/zoneminder/issues/17
@dlandon Awesome that seemed to fix it. I was missing the verify_ssl: false and didn't quite have the host: line set up correctly.
-
@dlandon I have tried adding the certificate and changing the ServerName file to my FQDN (although I may have done this wrong) and I still can't get home assistant to view Zoneminder. I will monitor the Home Assistant forum and see if anyone figures it out.
-
Is there anyway to set the retain flag to true in this docker?
-
@dlandon All that I type in is the host and port of zoneminder.
-
I think I am having a similar issue. My zoneminder seems to be working and I can log into the web interface however I am not able to get it to accept requests from Home Assistant. Not sure if this is related but it happened after I updated Zoneminder docker.
-
2 hours ago, dlandon said:
I've updated the docker to run zmaudit once a week. Turn off RUN_AUDIT in the options and restart Zoneminder.
Zmaudit has been known to take up too much processor time and does not need to run continuously.I have had this off for awhile now and over the past couple of days it has seemed to be more stable however once in awhile i notice it has some trouble (I have not yet tried to increase the resolution or add the color back which i may do here in the next couple of days)
-
I saw this somewhere so I have Run_Audit off. I do have appdata/Zoneminder on an SSD
-
when i select webgui i get taken to the following address IP Address:8080/zm/index.php
-
3 minutes ago, dlandon said:
Take a look at this: https://forums.zoneminder.com/viewtopic.php?t=25874
It seems 1.32 has an issue with your cameras. The fellow that hosts the package ppa that I get the Zoneminder software from is apparently working with those particular cameras to find and fix the issue.
I will start to follow this then. Thanks for all the advice and help. Sorry to waste all your time though
-
8 minutes ago, dlandon said:
What dockers do you have?
I have Appdaemon, binhex-emby, Logitech Media Server, Transmission, Google-Music Manager, Zoneminder, HDDTemp, mariadb, nextcloud, pihole, Dolphin, Grafana, home-assistant, Home-Automation-Bridge, Influxdb, letsencrypt, MQTT, PlexMediaServer, syncthing, telegraf, tvheadend
-
2 hours ago, dlandon said:
Why do you have the dynamix.s3.sleep plugin installed on a server running Zoneminder that needs to continually run?
Remove networkstats.plg and NerdPack.plg. These may be impacting your Zoneminder.
In Tips and Tweaks:
- Disable NIC flow control and NIC offload.
- Set 'CPU Scaling Governor' to 'Performance' and 'Intel Turbo Boost' to 'Yes'.
- Set Disk Cache 'vm.dirty_background_ratio' (%) to 5.
- Set Disk Cache 'vm.dirty_ratio' (%) to 10.
I had this the dynamix.s3.sleep plugin on here before i had zoneminder. it is disabled right now. I did all of these tweaks and still am having the same issues.
-
2 hours ago, dlandon said:
It might not be called snapshot in your camera.
Did you find anything about variable bit rate, rather than constant bit rate?
What does your bit rate show on the 'Console' of Zoneminder? It shows at the bottom of the 'Function' column.
I don't see anything called snapshot or anything that lets me change how often an image is sent
There is nothing about variable bit rate. Just the maximum
My bit rate is about 496 kB/s for the one camera and 300 kB/s or less for the others. Total is 1.33 MB/s
-
6 minutes ago, mgranger said:
I have all 4 cameras running right now and as far as the tearing it seems a lot better but everything is a lot lower quality compared to where I was previously.
- I have 2 fps (which is where i was before)
- Couldn't fine anything called snapshot
- I set the max bitrate to 2048 (I can't remember what it was previously but it was around 5120 or 6144)
- The resolution is now 1080p (1920x1072) (it was previously 2560x 1440)
- I set the color to 8 bit (previously it was 32 bit)
- Also now i am just recording rather than MoCord
I have a couple other dockers running on my system but nothing that is really taking many resources up (Emby but nothing streaming at the time, no VM's)
My cameras are Reolink RLC-422 and Reolink RLC-410.
They are all wired.
I will attache my Unraid Diagnostics as well.
Well maybe I spoke too soon. I am still getting tearing although it is better than it was at first but it is still happening more than it should.
Bluetooth Pass Through
in VM Engine (KVM)
Posted
I am trying to get a bluetooth device hooked up on a Windows 10 VM but I am having some trouble and was hoping for some advice. I have passed through the usb dongle (Broadcom Corp. BCM20702A0 Bluetooth 4.0) and it seems to show up in my VM. Then it seems to have found a driver for it however when I search for devices nothing seems to be found. Any advice would be appreciated.