Struck

Hi Is it possible to disable the trash can inside of krusader ?. i apparently had 30GB inside it which made backup very slow.

Ok, i tried to do chmod 777 ttyACM0, and it worked. But as far as i know, the permission will reset when restarted, right? How do i make it persistent? root@Hotbox:/dev# ls -l ttyACM0 crw-rw---- 1 root dialout 166, 0 Feb 1 00:45 ttyACM0 root@Hotbox:/dev# chmod 777 ttyACM0 root@Hotbox:/dev# ls -l ttyACM0 crwxrwxrwx 1 root dialout 166, 0 Feb 1 00:45 ttyACM0

Hi I am trying to connect an arduino pro micro via usb serial to the node-RED docker container, but i have no luck. I have made a minimalistic arduino code that just outputs a number on the serial. When i connect the arduino to the unraid server, i can from the console use the screen command, to see the output on the serial port (/dev/ttyACM0) I have then tried to map this device into the node-red docker by adding a new device into the docker, with the value field to "/dev/ttyACM0" Wheni then try to run node-RED with the serial port plugin, and try to set the serial port to /dev/ttyACM0 it tells me "serial port /dev/ttyACM0 error: Error: Error: Permission denied, cannot open /dev/ttyACM0" I have also tried with the privileged mode. Any ideas? As bonus info, I have successfully connected to the serial port with a VM running windows as a test.

Without checking your diagnostics. Check your smart status, both your parity, disk 1 and disk 2 has a warning in smart status But disk 2 might just be a cable problem.

Yes this is my though too. The problem is, i don't realy know when it is done encoding. Another thing i am wondering about is how to use symlinks in the watch folder. Instead of me moving the data from the array to the watch share i would like to use symlinks (if possible) I tried creating a symlink with Krusader, but this didn't trigger handbrake to do anything. I tried to use symlinks for both folders and files directly in the watch folder. Any ideas?

I'm looking in the dockers web ui.

When i use the watch folder to encode a video, i cant see the progress in the handbrake container. Is this an error, or intended? Where can i see the progress of my encoding when using the watch folder to automatically encode a video?

Okay, cool. that was just what i wanted to know. Thank you!

Hi I am going to change my motherboard in my Unraid server. It is currently running 6.5.0 I want to know if there will be any problem of installing the new motherboard or if unraid will automaticaly detect the new configuration, and set the disk setup up correctly? I use the onboard sata controllers. The motherboard is from the same vendor, but is a different model, that will support my current CPU and setup.

That is absolutely correct. I will have to see what happens. And maybe consider buying a UPS with line interaction.

The power has not been out i know that much. So either must be a hardware or software issue. I don't have an UPS, since i live in a country with very good reliable power distribution. The bios is set to NOT automatically start when AC power returns. I have now set it into troubleshooting mode, but i don't expect it to happen again.

Hello. My server has experienced a random hard reboot, that resulted in a parity check Can you see anything from my logs?. It seems to have happend around 9am. This is the first random reboot it has made. I am running 6.5.0, and the system was online for at least two weeks before the reboot. Thanks tower-diagnostics-20180328-1149.zip