salora

There's is a problem with autodetect. The -U command parameter was dropped from the latest Nut. You can run /usr/bin/nut-scanner -N from the command line. But I think your problem is the built in UPS service Apcupsd is still running. Do you really need Nut? Does the built in UPS not work for you? thank you for your answer! I forgot there was a buit in ups service ! and indeed it is this one that tell me my ups is online but does not communicate with it . The nut plug in do not start anyway So i disabled the built in ups service, I ran /usr/bin/nut-scanner -N and copy the result into the conf editor it do not work better sadly driver = "usbhid-ups" port = "auto" vendorid = "0463" productid = "FFFF" product = "Protection Station" serial = "AN2E49008" vendor = "EATON" bus = "001"

and this is what happen when I start auto-detect Serveur kernel: usb 1-11: new low-speed USB device number 4 using xhci_hcd May 6 18:08:48 Serveur kernel: hid-generic 0003:0463:FFFF.0006: hiddev96,hidraw0: USB HID v10.10 Device [EATON Protection Station] on usb-0000:00:14.0-11/input0 May 6 18:08:49 Serveur apcupsd[5248]: Communications with UPS restored. May 6 18:09:28 Serveur ool www[31797]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:09:58 Serveur ool www[31797]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:15:40 Serveur ool www[1071]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:16:12 Serveur ool www[1063]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:16:41 Serveur ool www[1071]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:16:52 Serveur ool www[602]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:21:51 Serveur ool www[1944]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:22:45 Serveur emhttpd: req (2): cmd=/plugins/nut/scripts/nutscan&csrf_token=**************** May 6 18:22:45 Serveur emhttpd: cmd: /usr/local/emhttp/plugins/nut/scripts/nutscan May 6 18:23:23 Serveur ool www[2674]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:24:21 Serveur ool www[2705]: /usr/local/emhttp/plugins/nut/scripts/start May 6 18:24:28 Serveur emhttpd: req (3): cmd=/plugins/nut/scripts/nutscan&csrf_token=**************** May 6 18:24:28 Serveur emhttpd: cmd: /usr/local/emhttp/plugins/nut/scripts/nutscan

hi thank you for this plugin :) So I've an ups eaton protection station when I plug it in to an usb port , the plug-in say it's online but cannot read the data of the UPS. when i connect it to a computer with the eaton compagnion software it's all ok ! So how can I make the plug-in read the data correctly? I tried every usb driver no luck. thank you for assistance this is how unraid sees my ups : Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS

here is the logs 2018-04-28T18:39:27.886254Z qemu-system-x86_64: vfio_region_write(0000:00:02.0:region2+0x291a50, 0x6d6d6d006d6d6d,8) failed: Device or resource busy 2018-04-28T18:39:27.886260Z qemu-system-x86_64: vfio_region_write(0000:00:02.0:region2+0x291a58, 0x6d6d6d006d6d6d,8) failed: Device or resource busy

Well I'am about to make it work with an 8gen intel core too had to boot with seabios and isolate the gpu and audio in syslinux conf like that : append pcie_acs_override=downstream vfio-pci.ids=8086:5912,8086:a170 modprobe.blacklist=i2c_i801,i2c_smbus initrd=/bzroot first I install win10 with vnc, then change settings to use my IGP and connect to vm with remote desktop to install intel drivers so far audio is passed, but on reboot even if I can see windows logon screen the vm just freeze ! and something about my device 00:02.0 already in use (the graphic adapter) so I'm stuck there and have no choice I cannot add another video card (no room in the case and the PCIE slot is used with a network card)