seefilms

Okay. I limited each to 3G and that seemed to fix it. Using this command "--memory=3G"

Also, what is the command I use in extra parameters to limit cpu usage?

Thanks for your response, JorgeB. It is not a one time thing. If it is affecting anything, I'm not sure of what that might be. But the error keeps coming up. Based on that link you sent it seems to be for BTFS...but I have XFS. Does that matter?

Hey guys, could I trouble you for some help? I am getting this error. "Your server has run out of memory, and processes (potentially required) are being killed off. You should post your diagnostics and ask for assistance on the Unraid forums." Thanks in advance for any help provided! Best, Scott blackmaria-diagnostics-20230728-2005.zip

This has been going on for quite awhile. And I'm finding it's slowing stuff way down. And I"m not sure what to do. Any help would be greatly appreciated. Thanks! blackmaria-diagnostics-20230227-1759.zip

Hey, pspfreak... can you answer Gruffydd's question?

Thanks trurl.

Sounds ominous.

Everything but my cache drive...which is 10 years old. Thinking of replacing it with an SSD but unsure which way to go with my configuration.

Hey everyone! I've bene thinking for some time about overhauling my well-used, faithful server (which is, for the most part simply a PLEX server). It is in its twelfth year of essentially non-stop service with no hardware issues other than the occasional replacement of hard drives (about half are 7 years old or more). This is what I currently have: OS: unRAID 6.11.5 | MOBO: Supermicro MBD-X9SCM-F-O | CPU: Xeon E3-1240 V2 @ 3.40GHz | RAM: 8GB Kingston DDR3 1333 | HBA: SAS Cards 2x Supermicro AOC-SAS2LP-MV8 | HBA: SAS Cards 2x Supermicro AOC-SAS2LP-MV8 | PARITY: 2X 4TB WD Red WD40EFRX | CACHE: 1TB WD Black WD1002FAEX | DATA: 4x 4TB Red WD40EFRX, 5x 3TB WD Red WD30EFRX | CASE: Norco 4224 w/ 120mm bracket | POWER Corsair Pro Gold AX850 | Norco 4224 Rackmount Hot-Swappable Server Case | Google Fiber | 140" Screen I have multiple PLEX streams flowing at home and abroad no problem at 1080p. But I'm having some problems with 4k. I'm thinking about now, but mostly into the future. I want to be able to have no problem with 4k and beyond (8k; HDR; etc). What do you think I would need? And did I post this in the correct place? Thanks for any help you can provide.

Thank you Squid. It didn't seem to work at first...but perhaps I wasn't patient enough. And then: BOOM! Thank you.

And why does it say that I'm advanced for crying out loud!!!! I don't feel remedial...usually. Okay, sometimes.

Default Base Folder: /config Temporary Download Folder BrowseLocation to store unprocessed downloads. Can only be changed when queue is empty. Minimum Free Space for Temporary Download FolderAuto-pause when free space is beneath this value. In bytes, optionally follow with K,M,G,T. For example: "800M" or "8G" Completed Download Folder Browse There are those settings, jj. I'm not sure how to run docker safe permissions, but I would be very happy to. Squid, that's a really good question. Here is the answer: Import failed, path does not exist or is not accessible by Sonarr: /config/Downloads/complete/tv/Steven Universe S05E24 Legs From Here to Homeworld 1080p iT WEB-DL AAC2 0 H 264-iT00NZ-RakuvFIN-Obfuscated/ I swear I'm not insane. And yet, I'm pretty sure you are going to tell me to do something like "push 'enter'" and it will fix everything. Thanks so much for both of you responding.

Okay. I gotta add my 2 cents because I'm going rather insane. Years ago when I set my server up I was using binhex for things like sab and couch potato and whatever. Awhile back, I decided to switch to the linuxserver versions. It seemed to go well for awhile...and yet I had trouble getting my movies from the downloads folder into my actual movie folder. Well, I decided I would try to fix that. I moved to Radarr and moved everything to linuxserver thinking that the mappings would be easier that way. Now neither my tv nor my movies will go from the completed downloads to folders where they are supposed to go. I've made it WORSE!!!! And it's driving me nuts. I've been reading page after page here and I've tried quite a few things but I cannot get it to work. I really don't want to have to nix my docker and start from scratch. There's just too much information there. But if I have to delete all the sonarr, radarr, sab and whatever else....I will. I'll even try nzbget. I just really want to fix this. It's a massive hassled to come to this thing every night and put everything in it's place. So thank you in advance whoever is willing to help. The mappings are as follows: Sab, Sonarr, Radarr.

How extremely unhelpful, lionelhutz. I have the same question and your 'solution' isn't one.

Thanks, saarg. Of course it's in the dashboard tab. Feel silly. Thank you.

hexen and saarg, what do I have to do to get 'system status' to come up. I'm having issues with my system and I'm trying to figure out what's going on. That might help. BTW, wish I had a Haswell processor!

Strangely enough...that's not the case. Before I deleted the docker.img file. I first reinstalled Plex via CA previous apps. It didn't work. And what's more...it did not (for whatever bananas reason) add the /mnt part. It just wasn't there. I thought it was odd. At the time, I thought: Well, Limetech said the docker would be 'easier'. So maybe /mnt is just the assumed way it automatically goes and therefore it isn't visually present. But it bugged me that there was no "container volume: /mnt host path: /mnt/ with read/write access" even while "container volume: /config host path: /mnt/user/appdata/plex/ with read/write access" was present. Why it wasn't actually there is a mystery to me. Either way, I was directed to delete the docker.img file. And now, because of your and others help...I'm back up and running.

BOOM! I did it. Thanks so much. Here was the problem. Previously, before I went to 6.2 this is what it looked like: Unraid 6.1.9 using Linuxserver/plex:latest container volume: /config host path: /mnt/user/appdata/plex/ with read/write access container volume: /mnt host path: /mnt/ with read/write access This is what it looked like before I just fixed it (with your help): Unraid 6.2.0-rc3 using Linuxserver/plex:latest container volume: /config host path: /mnt/user/appdata/plex/ with read/write access Why didn't it add the "/mnt" line automatically? I had to add it manually and now it works. Thanks again.

Why are my screen grabs so friggin' massive?! Sorry!

Weird. I don't think it's mapped anywhere. How do I map it exactly?

Sorry. I'm happy to show you. I'm just not sure how to do that.

I think I spoke too soon. Everything in plex LOOKS like it's all there. Every movie and tv show. Everything. Even the ones that are watched and unwatched...or even partially watched. BUT: Everytime I go to play something it says: Please check that the file exists and the necessary drive is mounted. When I check each media file it shows the correct file path. But then, in red it states: UNAVAILABLE. Plex.tv says this about it: The file has been renamed: NOPE The file has moved: NOPE The drive on which the file is stored is not mounted (e.g. a USB drive is not plugged in): NOPE The drive on which the file is stored is mounted with a different name. This can happen unintentionally sometimes if the drive is improperly removed and then plugged back in, which can cause it to mount with a new name.: NOPE The computer account under which Plex Media Server is running does not have the correct filesystem permissions to access the content location or the content files.: MAYBE? I DON'T KNOW. Can I get some help?

Okay guys, thanks for this. I'm going to try it. ....... Half an hour later and.... Everything is back up and running perfectly. Thanks guys!!!

I'm not sure I deleted the docker.img file. I probably didn't. I probably just deleted the plex container. When I go to delete that I click on "also remove image". I thought that deleted the docker.img file. But apparently not. Let me ask you something first. If I delete the entire docker.img file, will I have to set up couch potato, sonarr, sabnzbd, etc...all over again?