CODEG33K

Been using this container for quite some time now, and it works fine at my end. Haven't changed the OVPN file since original install using DK and SE servers. Is it all torrents that fails?

Rolled back to rc7 - didn't help. Back on rc8 and tried adding the DNSMASQ_USER=root bit as an environment variable after some google investigation which didn't help either. So just removed the docker installation and cleaned appdata folder and all is working again. Will close the report as I still don't know what caused it.

I think that was because of the wrong dd commands. Haven't tried it with the flags that I also used for the creation of the ISO later on.

Mar 3 20:59:01 Tower unassigned.devices: Mount iso command: mount -ro loop '/mnt/disks/Testdrive/Drive/cache.iso' '/mnt/disks/cache' Mar 3 20:59:02 Tower unassigned.devices: Mount of '/mnt/disks/Testdrive/Drive/cache.iso' failed. Error message: mount: /mnt/disks/cache: wrong fs type, bad option, bad superblock on /dev/loop2, missing codepage or helper program, or other error.

I can mount the unassigned device, where I have 2 folders; * Drive Holds the ISO file * Log Holds the map file from ddrescue Edit: Just realized what you asked, and tried to add the ISO file as a share in the unassigned devices. Just to see this result in the log; Mar 3 20:59:02 Tower unassigned.devices: Mount of '/mnt/disks/Testdrive/Drive/cache.iso' failed. Error message: mount: /mnt/disks/cache: wrong fs type, bad option, bad superblock on /dev/loop2, missing codepage or helper program, or other error.

I tried that to begin with, only to have zero files to look at. Then found the correct command to use, to get an ISO saved...should maybe have been *.img instead? But do you know how I mount an iso that contains the entire cache disk information? Also I did receive that USB -> SATA converter, so that I as a last resort could use some rescue software to at least get my docker.img and VM image back...the rest can be gone - I don't mind...

So, with the help of ddrescue, I was able to get a iso of some sort, and afaik this ISO contains the entire disk, and the files itself. Now I'm struggling to get that ISO file mounted, so I can extract data from it. I used this command to get the ISO compiled; ddrescue -d -f -r3 /dev/sdf /mnt/disks/Testdrive/Drive/cache.iso /mnt/disks/Testdrive/Log/ddrescue.log The ISO sits in a unassigned disc with xfs filesystem. I can't seem to get an fs type from the ISO file created, and I'm a bit lost as to what to do next. I've pulled the damaged SSD (Cache) drive, just to be sure nothing else happens to it. Where do I go from here?

Thanks for the input. It's running now... Couldn't get to work with unassigned devices, so had to mount another drive... Crossing fingers in about 12 hours when it's done

Hi guys, This morning I couldn't reach the Internet, so I started to check my PiHole DNS docker. When logging in to the Unraid server, the VM and Docker were not running (Service couldn't start) The Cache drive was not mounted, so I stopped the array and started it again. Still not able to mount. Then reading through a lot of logs etc just to see, that it might have been due to a unclean reboot. Hours later, reading up on various blog posts around the Internet, I pretty much gave up, since nothing really helped, and didn't want to make it worse (which may be too late) Anyways, it's my SSD Cache drive marked as /dev/sdf that is giving me issues. It contains the system app data, but also the docker image and libvert image, along with some other backup stuff. Ideally I would like to be able to recover some files, and have ordered an USB-> SATA converter, just in case I need to hook it up to my main pc and try and recover files that way. But I wanted to reach out here also, just in case someone could help me on this. fsck result: root@Tower:~# fsck /dev/sdf fsck from util-linux 2.36 e2fsck 1.45.6 (20-Mar-2020) /sbin/e2fsck: Input/output error while trying to open /dev/sdf The superblock could not be read or does not describe a valid ext2/ext3/ext4 filesystem. If the device is valid and it really contains an ext2/ext3/ext4 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> or e2fsck -b 32768 <device> Smartctl: root@Tower:~# smartctl -a /dev/sdf smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.1-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37960G Serial Number: 50026B778326A54D LU WWN Device Id: 5 0026b7 78326a54d Firmware Version: SBFK61K1 User Capacity: 960,197,124,096 bytes [960 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 2 13:51:56 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 112) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 1460 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13332 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 21 149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3363 167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 14 170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 010 Old_age Offline - 0/34 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 86 (Average 23) 181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2 192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 13 194 Temperature_Celsius 0x0022 032 041 000 Old_age Always - 32 (Min/Max 23/41) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2 199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 231 SSD_Life_Left 0x0000 097 097 000 Old_age Offline - 97 233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 22000 241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 28075 242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 6193 244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 23 245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 86 246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 2040736 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 00% 13330 0 Selective Self-tests/Logging not supported Guides I've been looking at; - tower-diagnostics-20210302-1343.zip

Hey guys, Lately I'm getting these erros in PiHole DoH; [31mERROR[0m[2020-10-31T10:04:05+01:00] failed to connect to an HTTPS backend "https://1.1.1.1/dns-query": failed to perform an HTTPS request: Post "https://1.1.1.1/dns-query": dial tcp 1.1.1.1:443: connect: no route to host [31mERROR[0m[2020-10-31T10:04:05+01:00] failed to connect to an HTTPS backend "https://1.0.0.1/dns-query": failed to perform an HTTPS request: Post "https://1.0.0.1/dns-query": dial tcp 1.0.0.1:443: connect: no route to host Restart doesn't help and all wireless clients are strugling to get online. resolv.conf are correct afaik. Any1 else having these errors?

Confirmed here also.. No files available other places than in the webui