skaterpunk0187

Its easier to tape or clear nail polish over the third pin then modify a cable. I guess it could be worth a try its only takes a few seconds to do. And -=Striker=- is using SAS drives and HGST brand not WD, you will never find a SAS drive in an external enclosure. I have some "white" labeled SAS drive but they are not white label implied in that sense

the pin 3 mod is for drives themselves and as far as i'm aware that is a sata drive only that are shucked from USB enclosures and does not apply to SAS drives

How big is your power supply? SAS uses more power then sata drives thats why backplanes use molex conntectors instead of sata power. Try plugging in one or two drives and see what happens

I'm not familiar with LSI WebOS. If it has a spot to list drives and its empty it could be a problem with the cables and/or backplane. The cables connecting the lsi card to the backplane can be directional, make sure they are not installed backwards. What case and backplane are you using?

Welcome to Unraid, The LSI 9271-8i is a Megaraid card not an HBA (host bus adapter) and does not support HBA. You can look into IT firmware that will make it an HBA, but IT firmware isn't available for all megaraid cards, it could also be crossed flashed with another card firmware but do your research first it could render the card unusable. During boot the card should give an option like ctrl i or ctrl h or something like that to open the raid utility you will have to create an array using only a singles drive in each save and reboot and the drives should so up in Unraid. This isn't the best way to do it but it works thats how I did it when all I wad was a raid controller.

When I try to use preclear it just sits as starting. I let it run for two days and still saying starting with an empty log.

I've checked permissions, tried different install places everything i can think of. The wizard still going from user setup to login (it skips the step to get camera password and button to go to cameras) and cant log in with user and password i set. I try and come back to it later.

3.10.6 and 3.10.5 starts to work the wizard comes up for NVR name and UTC then next to user setup then clicking next goes to login screen, it doesn't finish the wizard.

I tried to use the unifi-video container it installs, but on first run it does not start the unifi-video service, I can console in to start it or a container restart will start it. The real issue is when it starts it props for login not the setup wizard which makes it useless since you cant add a user.

I'm glad I stumbled across this thread. I was originally a FreeNAS user so I have a large amounts of RAM. Since Unraid doesn't use RAM for its cache or pretty much anything other then holding Unraid itself, thig gives me a use for the RAM I have. It works great using the /tmp directory with no other sub-directories as Plex will create its' own. With no errors after reboots. You can verify /tmp is Used only in RAM as you play a video that transcodes you will see the RAM usage on the dashboard increase. Let it play for a while and stop (not Pause) the video and you'll see the RAM usage drop to where its always is. I have been running like this for a several days with four devices (Xbox One, Xbox 360s, and Roku) transcoding off and on and all at the same time with 30+ hours watched without an issue.