z00100

Thanks! Worked

Hi All, I just migrated to Linux (PopOS!) and love it so far. One of the issues I'm facing is that I cannot access the UNRAID Web GUI via any browser in linux. It seems to resolve to unraid.local and complains unraid.local’s DNS address could not be found. Diagnosing the problem. This worked flawlessly in Windows. What am I doing wrong? Please help.

I’ve been using unraid now for almost 7-8 months. I like how you can take common pc components and make it into a powerful NAS. I would like snapshotting of docker containers and vms. This way we can revert if anything breaks.

THIS!! Worked perfectly! Thank you so much.

So....... I upgraded to 6.8.0-rc9 to test it out. I have a MSI Tomahawk B450Max motherboard and it seems that the NIC isn't picking up DHCP. It autoconfigures to 169.254.142.227. Furthermore, the connectivity light on my switch is off for the port it's plugged into. Basically it seems the driver(s) for the NIC are not loading. How can I either fix this or revert back to the older version? /edit The LAN chipset is: Realtek® 8111H Gigabit LAN controller Thanks!

Just wanted to say that Tom from Support was GREAT!! Problem solved and now my array is fully functional. It's just clearing the drives as we speak! Turns out the issue was on their backend. I had a key which was replaced with a new USB Key and the serial wasn't transferred over to the new UUID. All is well now and balance has been restored to the universe Bravo UNRAID team.

Or Intel. Their SSD's are good for this case.

Thanks will try that

Just wanted to update that there's no key in sight. Is there a LimeTech employee that monitors these forums?

Yeah that whole Google Compute Engine being down could be a cause. Sucks that it HAD to happen at the exact time I was buying the upgrade key

Fantastic news!!! Can't wait for that to happen

Oh and I also got the paypal confirmation e-mail.

The only e-mail I got was a thank you for the purchase e-mail. It should have been followed by another e-mail with the key. Just like when I purchased basic. So 1 email came through but 2nd is AWOL It's not super critical but it would be nice if I got it some time today.

Even in my SPAM folder. NADA!

Try ZeroTier. I use it exclusively and it's absolutely fantastic. The only "downside" is that all computers in the ZeroTier network have to have the client installed. Not a biggie.

I did it via the normal web page. I checked out via Paypal as I usually do and got the confirmation e-mail for payment. But no key in sight

I wish they had a "control panel" where you can administer your own keys.

Pulling the drives out would be a massive pain in the ass! I have a rackmount server case that is super hard to get into and "remove" Just adding the 3 drives took me an hour. I'm not going to waste time unplugging drives just to re-plug them in again. Just a quick question. Is the key generated by a "human"? Or is it automatically system generated? If it's human created then will they issue keys on a Sunday?

Might want to run unBalance to redistribute the data over the drives. Not essential but it helps.

So my adventures with UNRAID have been extremely fruitful and I'm now convinced that this is the right solution for me. So I've been adding drives to my UNRAID setup. I just finished adding 3 more drives (2x4TB WD RED and 1x Intel 660P nVME SSD for cache). So as expected, the array wouldn't start because it said I now have 7 drives and I should upgrade my key. So off I go and I paid to upgrade my key from BASIC to PLUS. My question is that my UNRAID setup doesn't seem to pick up the upgrade. Maybe I should receive a new key? Maybe I'm doing something wrong? As it stands my array is not powered on and I need access to my data Thanks for the tips people!

Thanks for the help!!! Will report back tonight or tomorrow after I finish migrating to the new chassis!

Well, what I mean is that: Let's say that SDA = SATA PORT 1 SDB = SATA PORT 2 SDC = SATA PORT 3 SDD = SATA PORT 4 After migrating to the new case, what if my config is: SDA = SATA PORT 3 SDB = SATA PORT 2 SDC = SATA PORT 4 SDD = SATA PORT 1 Will UNRAID automagically figure it out or will I have to go back to the console and make sure that the drive order/allocation is identical? Thanks!

I have a makeshift Unraid Server right now that has the following: Deepcool Case (Mid Tower) Athlon 200GE Gigabyte B450M DS3H 16GB RAM 4 HDD's in total with 1 Parity drive. I have 3 more drives waiting to be added to the array however the case doesn't have any space in it. So I went ahead and bought a Rosewill RSV-L4000 - 4U Rackmount Server Case. The case will be delivered today and I plan to move all my parts from the Deepcool case to the Rosewill case. My question is that in the event I change the "order" of the drives in the array, will that cause any issues? The Rosewill case will have a Vantec Hotswap Drive cage (4 Drives) that I will use, so I want to make sure that the downtime is as minimal as possible. Thanks for the help!

The tunable helped quite a bit! In fact it's now what I expected the transfer to look like. Thank you @Benson

It was set to "AUTO". I checked the WIKI and adjusted it to "RECONSTRUCT WRITE". I'll reboot the server and report back on if there is any performance increase or not. Thanks for the tip!