andy harris

here is my syslog but it doesn't really show anything have a missed a setting to get a more detailed log? syslog-10.0.200.232.log

Hi my server hangs after upgrading to 6.12 from 6.11.5 can somebody have a lookk and see if you can see the reason (i cant) interocitor-diagnostics-20230622-1518.zip

can anybody help with this error when i am trying to mount an unassigned device Nov 19 09:31:52 Interocitor unassigned.devices: Error: Device '/dev/sdj1' mount point 'Plex' - name is reserved, used in the array or by an unassigned device. thanks in advance sorted it i was having a brain fart 🤣

I had the same issue but noticed that my issue was that unassigned device had stopped working, I store plex database on a separate disk. reinstalled unassigned devices and it worked a treat

yes one did I was sure I had turned that off when I started fault finding i have now turned that off lets see if that fixes the issue

went down again today I cant seem to find out why 4.50 this morning any help would be appreciated seems a but strange this is the third Sunday on the trot it has gone down interocitor-diagnostics-20220410-1912.zip

so i have turned of xmp run a memtest two passes all ok still getting reboots also I have changed psu any other help would be appreciated looks like it rebooted around 4.40 this morning interocitor-diagnostics-20220405-1023.zip

thanks for that I will have a look at the memory and the c-state

can somebody with a bit more knowledge have a look at my logs and let me know if they can see any reason why my system has become unstable. can seem to find why but its just restarts randomly last time was 19:50 on the 27th any help would be much appreciated interocitor-diagnostics-20220327-1957.zip

you know its strange how sometime you can search and search and its right Infront of your face thanks very much for pointing me towards that just done the fixes lets see what happens

hi i have just started updating my unraid server from 4tb to 8 tb disks and i am getting weird disk issues disk read errors disks disabling disk showing crc errors but they all pass smart tests and they where al pre cleared before install and all checked out fine classic example swapped a 4 for a 8 yesterday set the parity running parity run fine woke up this morning disk is disabled so set the parity running again any help would be appreciated i have re seated all cables and drives not that it should have needed it i never got a single erro with the 4tb drives also all drives are ironwolf interocitor-diagnostics-20211117-1130.zip

same error here also

after much sole searching and trying to remember (not easy at my age) i remembered it was me 😞 😂 many moons ago when i first installed and setup unraid (so last week) i had it in there when i was running a pci card with 4 network cards on it with pfsense installed on the server so i apologise for having a memory like a network without a firewall

So can I remove it it is not something I have entered or does it come from something else I am running? If I can how ?

so is that is saying the second card cannot be seen because the driver is in use ?

this is the one with the second card installed and no p400 gpu or second raid card there should be a 1tb disk showing up, the disks shows on book in the raid card gui interocitor-diagnostics-20200714-1258.zip

sorry i didnt know now attached interocitor-diagnostics-20200713-1941.zip

hi i have an issue with my server specs b450 aurus pr motherboard ryzen 3600 32gb memory supermicro case p400 gpu 2x Fujitsu 9211-8i in it mode now the problems Fujitsu 9211-8i if i have just one raid card install the server works and plex works but i can only see 8 disks if i have 2 raid cards and one HBA on each crad i can only see half of the drives but has soon has i install the second raid card and set it to 1 in the raid controller the system start to boot shows all 11 drives in the raid bios but they dont show up in unraid and the p400 doesn't work anybody got any ideas i am assuming it is an unraid issue with the raid bios showing all the disks (but you all know what asume did) i could understand if if i could not see the drives in the bios but they are showing up. Thanks in advance

FIXED it i have no idea how just the old reset everything and try again hi i have just upgraded to a ryzen for my system and i am unable to get the nvidia driver to see the p400 card i get the following error "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running." quick system overview b450 mortherboard pci slot 1 p400 pci slot 2 lis card pci slot 3 quadro nvs 295 slot three is set to primary video device and it give an out put on video the cards are both showing in the device list [1022:43c7] 02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [8086:1539] 03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) [1000:0072] 05:00.0 RAID bus controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) [10de:06fd] 07:00.0 VGA compatible controller: NVIDIA Corporation G98 [Quadro NVS 295] (rev a1) IOMMU group 1:[1022:1482] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 2:[1022:1482] 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1483] 00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [10de:1cb3] 08:00.0 VGA compatible controller: NVIDIA Corporation GP107GL [Quadro P400] (rev a1) [10de:0fb9] 08:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1) i have removed the driver and reinstalled it same error i tried with just the p400 in same error i changed the slot of the p400 same error anybody got any ideas

hi i have just upgraded to a ryzen for my system and i am unable to get the nvidia driver to see the p400 card i get the following error "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running." quick system overview b450 mortherboard pci slot 1 p400 pci slot 2 lis card pci slot 3 quadro nvs 295 slot three is set to primary video device and it give an out put on video the cards are both showing in the device list [1022:43c7] 02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [8086:1539] 03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) [1000:0072] 05:00.0 RAID bus controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) [10de:06fd] 07:00.0 VGA compatible controller: NVIDIA Corporation G98 [Quadro NVS 295] (rev a1) IOMMU group 1:[1022:1482] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 2:[1022:1482] 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1483] 00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [10de:1cb3] 08:00.0 VGA compatible controller: NVIDIA Corporation GP107GL [Quadro P400] (rev a1) [10de:0fb9] 08:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1) i have removed the driver and reinstalled it same error i tried with just the p400 in same error i changed the slot of the p400 same error anybody got any ideas

of course what a great big hairy wazock i am thanks for the reply

hi is this normal for the process on the nvidia when not doing any transcodeing ? just rebuilt and cant remember seeing the process last time

got the new key system but i am getting the same errors "docker service failed to start" vm seems to start ok but no docker any suggestions or am i going to have to rebuild my docker system

so after a bit or mucking around i THINK (cant be sure until i get a new licence) i had two issue isues one the new usb was faulty even if it checks out fine if i use it when i reboot the server the usb wont boot issue 2 the back i was using was corrupt i have now gone back to a older one an the server will boot and reboot normally i wont know for sure until i get a new licence hopefully fingers crossed that was the issue

another bit of info when the flash shows has empty when i reboot the bzroot-gui wont load checked the usb and no error replace it and the system will boot log attached from last fail tower-syslog-20191118-0837.zip